Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Kennedale
We work on gates all over Kennedale, from the acreage properties off Dick Price Road and Mansfield Cardinal Road to the newer subdivisions near I-20 and 287. Most calls we get in this part of southeast Tarrant County are not simple hinge fixes. They are power problems, span problems, and retrofit problems on gates that were never designed for an automatic opener in the first place. If your gate is sagging, refusing to open, or grinding halfway and stopping, call us at (828) 426-7081 and we will send a technician who knows what Kennedale’s clay soil and long driveway runs do to gate hardware.
Every visit starts the same way: you get the technician’s name and photo before we arrive, and you get a written price before any work begins. No anonymous truck pulling up, no open-ended invoice at the end. That is the standard we hold on every Kennedale job.
Why Warden Gate Repair Is Kennedale’s Preferred Gate Repair Company
Kennedale is different from Arlington or Fort Worth, and the gate work reflects that. We see long-driveway swing gates, heavy welded-pipe ranch entrances, and solar operators out here far more than the ornamental privacy gates that dominate the suburbs just north of here. Our Gate Repair team works on both, but the acreage work is where local knowledge actually changes the outcome.
Scheduling is coordinated from the brand’s Dallas-Fort Worth office, and crews serve Kennedale locally, so a tech is typically at your gate within a day or two for non-emergency work, and faster when it is urgent. We answer the phone with a live person 24 hours a day, seven days a week. You will never get a voicemail tree when you call about a gate that will not close and a dog that wants out.
The 365-Day Done Right Promise applies to every repair we do in Kennedale. If the repair is not right, we make it right, and the return visit is free, in writing. Cole Rafferty, who leads our team, is the person behind that promise. He has been doing gate-specific work since the company was founded in 2008 as part of the Threshold Group family, and he does not let a job close unless the gate runs clean.
Wrought Iron Gate Repair in Kennedale
Wrought iron gate repair in Kennedale usually means two things: addressing a hinge or post problem on an ornamental entrance, or bringing a decorative iron gate back to square after years of North Texas sun and clay movement. The ornamental iron used on many 2000s-era subdivision homes in Kennedale holds up well, but the hardware does not. Post heave in the expansive Blackland Prairie clay pushes hinge posts out of plumb, and once the gate sags, the latch stops catching and the opener starts laboring. We re-set posts, re-align leaves, replace worn hinges, and touch up weld points where rust has started. Expect most wrought iron repairs in Kennedale to run between $225 and $485 depending on whether we are re-hanging a gate leaf or pulling and re-setting a post footing.
Post Setting and Hinge Work
When a wrought iron gate post leans, the fix is not shimming the hinge. It is digging down, checking what the clay has done to the footing, and setting the post in a larger-diameter concrete base so it does not repeat the same heave cycle next spring. On Kennedale clay, we go deeper than the standard footing spec because we know the swell season is coming.
Realignment and Latch Repair
An iron gate that scrapes the ground or will not latch usually needs leaf realignment, not replacement. We adjust the hinge barrel, reposition the latch plate, and square the frame so the automatic opener is not fighting a crooked gate every cycle.
Metal Gate Repair in Kennedale
Metal gate repair in Kennedale covers everything from light aluminum walk gates to heavy welded-steel pipe driveway gates that weigh over 200 pounds. The heavy end of that range is where we do most of our acreage work. These pipe gates were built strong, but they were hung on posts sized for a manual swing, not for the repeated torque of a residential automatic opener. We repair cracked welds, replace bent hinge barrels, build up worn post caps, and convert old chain-link or pipe frames to work with modern operators. The honest price range for most metal gate repair in Kennedale is $275 to $690, and heavier structural work like re-welding a failed hinge mount falls on the higher end.
Weld Repair and Frame Strengthening
Rust and fatigue crack old welds, especially where the gate frame joins the hinge post. We grind out the failed weld, re- weld with proper penetration, and often add gusset plates so the repaired joint is stronger than the original. An acreage gate swinging in the wind loads that joint in ways a subdivision gate never sees.
Automation Retrofits on Heavy Gates
When a homeowner wants a welded-pipe gate automated, the first thing we check is whether the existing posts can hold the opener’s torque. Often they cannot. We reinforce the post or re-set it on a deeper footing before we ever mount the operator, because skipping that step is how motors burn out and gears strip within six months.
Trusted Brands We Service in Kennedale
We are authorized for service on nine major brands, and around Kennedale the ones we reach for most are FAAC, Linear, and Viking. FAAC operators handle the heavier slide gates well, and their hydraulic models are common on acreage entrances that need to move real weight. Linear and Viking show up on a lot of the mid-range residential installations in the newer subdivisions. We keep common arms, boards, and safety components stocked for these brands so we are not waiting on a distributor in Dallas when your gate is down. We service LiftMaster, BFT, Ghost Controls, DoorKing, Elite, and Mighty Mule as well. Same-day stock, less waiting, and a tech who knows the brand he is opening up.
Common Gate Repair Problems We See in Kennedale Homes
- Post heave in clay soil: The Blackland Prairie clay under Kennedale expands with fall and spring rain and shrinks in the summer drought. Hinge posts drift out of plumb, and suddenly the gate will not close against the strike plate. We re-set the post with a deeper footing and often a larger diameter concrete base.
- Solar opener issues on long driveways: Most Kennedale acreage gates are too far from the house to run mains power economically. Solar operators are the right solution, but undersized panels or old batteries fail in North Texas heat, and the gate will not operate on cloudy weeks. We size panels and battery banks for the actual gate weight.
- Retrofitted livestock gates stripping openers: Heavy welded-steel pipe gates built for manual use were never designed for a residential operator’s torque. The motor strain strips gears and burns boards. We reinforce the post, re- hinge the gate, and match the operator class to the true weight.
- Warped wood gates losing square: Older homesteads in Kennedale often have wood driveway gates. Summer heat delaminates the boards and changes the gate’s weight distribution, dragging the gate out of square and off its sensor alignment. We repair or replace the frame members and re-set the travel limits.
Pricing for Gate Repair in Kennedale, TX
Here is what you can expect to pay in the Kennedale market. A straight hinge replacement or latch adjustment runs $180 to $275. A post re-set with a new footing to fix heave work is $350 to $600 depending on post size and access. A full automation retrofit with a solar operator on a long driveway, including post reinforcement, runs $1,800 to $3,400, and the operator model accounts for most of the spread on that. Those are the numbers we quote in Kennedale, and they are the numbers on the written estimate before we start. You will never see a “miscellaneous” line item appear after the fact. Call (828) 426-7081 for a free estimate, and you will get a real number, not a range.
We Also Serve Cities Near Kennedale
Warden Gate Repair serves Kennedale and the surrounding area, including Arlington, Mansfield, Burleson, and Fort Worth. If you are on the edge of town or just over the city line, call us anyway, the service area covers the whole corridor.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kennedale
The most common cause in Kennedale is post movement in the expansive clay soil, which shifts the gate’s travel path and throws off limit-switch and photocell alignment. We fix the root post problem first, then re-calibrate the limits, because re-programming a gate on a moving post just creates another callback. Call (828) 426-7081 and we will diagnose it on the first visit.
Yes, but the post and hinge work has to come first, because those old ranch gates are usually too heavy and their post diameter too small for a bolt-on residential opener to last. We reinforce or re-set the hinge post, then size a solar FAAC or Viking operator for the actual gate weight. Estimates are free at (828) 426-7081.
Yes, and for most Kennedale acreage properties where mains power is hundreds of feet away, solar is the only sensible option. The key is matching the panel and battery bank to the gate weight and daily cycles, which most off-the-shelf kits do not do. We size the system correctly so it runs through a North Texas winter.
Usually yes, but the hinge is rarely the cause. A sagging metal gate in Kennedale is typically a hinge post that the clay has pushed out of plumb. We re-set the post, then re-square the gate, and only replace the hinge if it is actually worn. Get an exact answer from our team at (828) 426-7081.
Yes, automatic gate operators in Texas are required to have safety mechanisms such as photocells or contact edges that prevent the gate from closing on a person or vehicle. Kennedale properties with older retrofitted livestock gates often lack these, and we correct that as part of any automation service. Call (828) 426-7081 for an assessment.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Kennedale and the surrounding North Texas area.