Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Savannah, TX
Gate repair in Savannah, TX means something specific: working on nearly new homes where the original automation is just now reaching the end of its service life, on clay soil that moves every gate post a little further out of plumb each season. We focus on automatic driveway gates, electric gate repair, and gate motor repair for this master-planned Denton County community, where the housing stock is young but the operating conditions are hard on equipment. If your gate is grinding, sagging, or refusing to open, call (828) 426-7081 and we’ll walk you through what’s happening before anyone comes out.
Why Savannah Homes Are Different
Most of Savannah was built between the mid-2000s and 2020s, which means nearly every automatic gate in the community is entering its first major service cycle at roughly the same time. The gate motors, hinges, and decorative iron panels installed at construction are aging together, and the failure patterns repeat from street to street. We see sagging ornamental iron panels, corroding hinge pins, and failing LiftMaster-style operators in clusters because the equipment shares the same build era and the same few builders.
Underneath all of it is Blackland Prairie expansive clay. It swells hard after spring rains and shrinks during summer droughts, and every wet-dry cycle nudges gate posts out of vertical. That throws the gate out of its track or sensor alignment, which is why post resets and realignment work outnumber pure motor failures here. The heat does its part too: summers above 100°F stress circuit boards and battery backup units, and the powder-coat on iron gates breaks down faster than it does in milder climates.
There is one more Savannah reality that shaped how we work here. The HOA architectural control committee requires pre-approval for any repair that changes visible materials, color, or hardware style. Swap a gate motor housing for a different finish, or replace iron hardware with something visually different, and a homeowner can end up with a violation letter even though the gate works perfectly. We account for that before touching anything.
Our Main Savannah Services
Most Savannah calls to us fall into one of three categories, and each has its own detailed page. Here is what each job looks like in this community.
Gate Repair in Savannah
Sliding and swinging gates in Savannah take a beating from clay soil movement and summer heat, and the most common repairs are post realignment, hinge replacement, sagging panel correction, and track repair. Because the HOA requires architectural review for any visible change, we always confirm materials and finishes match the original before work starts. Read the full breakdown of what we fix and how we price it on the Gate Repair in Savannah page.
Electric Gate Repair in Savannah
When a gate stops responding to a remote, keypad, or sensor, the cause in Savannah is often a board or battery stressed by heat, or a safety sensor knocked out of alignment by shifting posts. We test the full control circuit before replacing anything, because on these newer installations the wiring is usually sound and the problem is a single component. See what a typical diagnosis covers on the Electric Gate Repair in Savannah page.
Gate Motor Repair in Savannah
The gate motor (the box that slides or swings your gate automatically) is the part Savannah heat punishes hardest. We service and repair motors across the brands installed in this community, and we check the arm, limit switches, and mounting plate along with the motor itself, since a motor that works fine but is mounted on a shifting post will fail again. Details on that process are on the Gate Motor Repair in Savannah page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Savannah
We are factory-trained on the gate and opener brands most common in Savannah, including Viking, Ghost Controls, and DoorKing. When we roll out to a job, we carry parts for these systems on the truck, which keeps turnaround shorter. For the full list of nine brands we support, visit our brands page.
Pricing for Gate Company in Savannah, TX
| Service | Typical range in Savannah |
|---|---|
| Gate post realignment (clay heave) | $180 – $340 |
| Hinge replacement (single gate) | $90 – $250 |
| Gate motor replacement | $450 – $1,200 |
| Control board replacement | $200 – $400 |
| Safety sensor realignment or replacement | $120 – $280 |
| Remote or keypad programming | $75 – $150 |
| Track repair or replacement | $150 – $400 |
| Power supply or battery backup replacement | $180 – $400 |
In Savannah, prices push toward the upper end when post work runs deep: if a post has heaved badly enough that resetting it means cutting and re-setting concrete rather than shimming, the job is more labor. Every price we quote is written and agreed before any work starts, so what you see on the estimate is what you pay at the end.
Neighborhoods We Serve in Savannah
We run calls across the entire Savannah community, including the older sections near the original build-out and the newer phases still settling into the clay. Most jobs we can reach within the same day or next morning, depending on when you call.
- Savannah central (near the elementary school and community center)
- The phases north of Fishtrap Road
- The phases south of 380 along the east side
- Newer build sections along the western edge
- Streets bordering the community lakes and greenbelts
Service Area – Cities Near Savannah
While this page is focused on Savannah, our crews also cover the broader region. You can find city-specific pages for Dallas, TX, Fort Worth, TX, and Houston, TX, plus San Antonio, FL. Each page covers local conditions and pricing for that area.
Serving Savannah, TX - Our Local Coverage Area
We’re based in the Savannah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Savannah
Most Savannah calls are reached the same day or next morning. If your gate is stuck open or stuck closed and you can’t secure your property, tell the person who answers and we’ll prioritize the visit. Call (828) 426-7081 for a real conversation about your gate and a straight answer on timing.
Any repair that changes visible materials, color, or hardware style needs architectural committee pre-approval in Savannah. If your repair keeps the gate looking the same on the outside, no approval is needed. We confirm before any visible component is swapped so you don’t get a violation letter later.
Yes. We service the entire master-planned community, from the earliest built sections to the newest phases. If you live in Savannah and have a gate issue, we’ll come out. Call (828) 426-7081 and we’ll set a time that works.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Savannah Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.