Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Parker, TX
Gate repair in Parker, TX is different from the work we do anywhere else in the metro, and it comes down to the housing stock. Parker’s minimum lot sizes mean nearly every home sits on an acre or more, with a long driveway and an estate-grade automatic entry gate. Those gates take a beating from the Blackland Prairie clay and the DFW ice storms, and when they fail, you need someone who knows exactly what they’re walking up to. Call (828) 426-7081 and you’ll get a written price before any work starts, always.
Why Parker Homes Are Different
Most of Parker’s homes were custom built between the mid-1990s and the 2010s, and the city’s one-acre minimum has kept the whole community low-density on purpose. That matters for gate work because the equipment is heavier, the gates are wider, and the operators are pulling more weight than a typical suburban gate in Plano or Allen. You’re looking at ornamental iron swing gates, long slide gates, and custom cedar builds, almost always tied into an intercom or access control system.
The bigger factor is what’s under the gate. Parker sits on Blackland Prairie expansive clay, which swells through the wet winters and shrinks hard in the summer drought. That movement heaves gate posts out of plumb and binds slide tracks, which is why a gate that ran perfectly in March can be dragging or reversing by August without anyone having touched it. Add the periodic ice storms that freeze operators and crack wooden panels every few winters, and you get a repair rhythm that’s specific to this city’s soil and weather, not something you’d see on slab in Fort Worth.
Our Main Parker Services
These are the three calls we take most from Parker homeowners, and each has its own dedicated page with pricing, timelines, and local detail.
Gate Repair in Parker
When a swing gate drops on its hinges or a slide gate binds mid-track in Parker, the cause is usually the same: shifting clay has moved a post, or an ice storm has snapped a latch or cracked an infill panel. Our techs start by checking the posts for plumb before touching the gate itself, because straightening hardware on a leaning post just guarantees a callback. The full breakdown of what repair costs and how long it takes is on the Gate Repair in Parker page.
Electric Gate Repair in Parker
Parker’s estate gates are almost all automated, which means the electrical side of the system is doing the real work: control boards, photo eyes, loop detectors, intercoms, and the wiring that ties them together. When a gate stops responding to the remote or the keypad, the issue is rarely mechanical. It’s usually a board that’s failed after a power surge, or a safety sensor that’s been knocked out of alignment by a shifting post. Details and pricing live on the Electric Gate Repair in Parker page.
Gate Motor Repair in Parker
The gate motor, which is the box that slides or swings your gate automatically, works harder in Parker than it would almost anywhere else. Oversized gates, long driveways, and the constant strain of clay-shifted tracks mean motors here burn out capacitors, strip gears, and overheat more often than the same unit would in a tighter lot. We service motors from FAAC, BFT, Linear, and Viking, and we quote the repair before we open the housing. The full scope of motor work is on the Gate Motor Repair in Parker page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Parker
Most Parker gate systems run on equipment from FAAC, BFT, Linear, or Viking, and those are the brands we carry parts for and know inside out. That means fewer return trips for a backordered board. See the full list on our brands page.
Pricing for Gate Company in Parker, TX
| Service | Typical range in Parker |
|---|---|
| Gate won’t open or close (diagnostic + common board/limit fix) | $150 – $350 |
| Gate motor replaced (swing or slide, standard operator) | $450 – $1,400 |
| Slide gate off track / binding | $180 – $600 |
| Swing gate sagging or dragging | $180 – $550 |
| Broken hinge or cracked weld on ornamental iron gate | $160 – $450 |
| Photo eye or safety sensor misaligned or failed | $120 – $280 |
| Keypad, remote, or intercom not working | $110 – $320 |
| Gate post reset or re-plumbed (minor, no concrete work) | $220 – $550 |
| Emergency gate stuck open or shut (after-hours callout) | $250 – $650 |
What pushes a Parker quote higher is usually the gate’s size and the post condition. A 20-foot ornamental iron swing gate with a leaning post is a different job than a standard 10-foot gate, and we’ll tell you that before you approve anything. Every price is written down and agreed before the first tool comes out, with no surprise line items at the end.
Neighborhoods We Serve in Parker
We work across all of Parker, and because most properties here are on acreage, our techs plan drive time between calls differently than they would in a denser suburb. Expect a realistic arrival window rather than a rushed one, and expect to know exactly who’s coming before they pull up.
- Parker East
- Country Club Park
- Springhill Estates
- Highland Meadows
- Winding Creek Estates
Service Area – Cities Near Parker
Our Parker crews stay local, and we also run repair routes into the surrounding metro. If your property is outside Parker proper, you can still reach us through our pages for Dallas, TX and Fort Worth, TX, where the same written-price promise applies. We also keep coverage pages for Houston, TX and San Antonio, FL if you or family have property there.
Serving Parker, TX - Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parker
Yes. We take repair calls across the entire city, including the acreage properties east and the estates near Country Club Park. Dispatch is coordinated from our Dallas-Fort Worth office, and crews serve Parker locally on a daily route, so most calls are scheduled within a realistic window rather than a rushed one.
For a repair on existing equipment, no. You generally don’t need a permit or HOA sign-off to fix or replace an existing gate operator, hinge, or control board. New gate installations and major structural changes are different, and we can let you know what to check before we quote. Call (828) 426-7081 if you’re unsure.
Call (828) 426-7081 and describe what the gate is doing. We’ll give you a realistic price range over the phone, and every job gets a written quote before any work starts. Estimates are free, and you’ll know your technician’s name and see their photo before they arrive.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parker Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.