Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Haltom City
Electric gate repair in Haltom City typically costs $185 to $460 depending on the fault, and most calls are handled within one to two business days. We work on back-alley slide gates, clay-tilted swing gates, and aging gate motors across Haltom City every week, so we know what this soil does to a post footing and what a garbage-truck strike does to a hinge plate. Call (828) 426-7081 and you’ll get a live person, a straight answer, and a written price before any work begins.
Haltom City sits on some of the most reactive clay in Tarrant County. That matters when your gate starts dragging or your opener starts grinding. The problem is rarely just the motor. It’s the ground underneath it. Our Electric Gate Repair team carries the parts and the post-setting equipment to fix both at once, so the repair lasts past the next rain cycle.
We also know the older grid neighborhoods well, from the alley-access lots behind Haltom Road to the 1950s and 1960s tract streets off Broadway Avenue and the neighborhoods around Diamond Oaks. When a back-alley gate gets clipped by a garbage truck, the resident still needs to get their car out in the morning. That’s the kind of call we treat as urgent, every time.
Why Warden Gate Repair Is Haltom City’s Preferred Electric Gate Repair Company
Warden Gate Repair is the gate-and-opener specialist, and we work on electric gates exclusively. That’s the whole business. Not a side line. Not a handyman add-on. Every Haltom City customer gets a tech whose full job is diagnosing gate motors, rack and pinion sets, keypads, photocells, and control boards.
Before a technician arrives, you get that person’s name and photo sent to your phone. At the door, they show a photo ID badge that matches. That’s the Threshold Standard, and we apply it on every visit in Haltom City. If you’re home alone or have kids in the house, you’ll know exactly who is at the gate before you open it.
Every repair gets a written price before work starts and a written guarantee when it’s done. If the repair isn’t right, the 365-Day Done Right Promise means we come back and make it right for free. Live phone coverage runs 24/7, so an evening failure on a Haltom City gate doesn’t mean waiting until morning for an answer.
Electric Gate Motor in Haltom City
The electric gate motor, the box that slides or swings your gate automatically, is the most common repair we handle in Haltom City. On Blackland Prairie clay, a gate post that moves even an inch can force a motor to work against its own gear train until it burns out. That’s why a Haltom City gate motor replacement often starts with the post, not the motor.
A typical gate motor repair in Haltom City runs $220 to $480. A full motor replacement, including a new arm or chain assembly and limit switch adjustment, usually falls between $450 and $900 depending on the weight of your gate and whether it swings or slides. We give the exact number in writing before any work starts.
Slide Gate Motor Repair
Slide gate motors in Haltom City work hard, especially on back-alley lots where the gate is the only thing between the alley and the driveway. When the rack and pinion gets knocked out of line, the motor strains and the gate jerks. We re-level the rail, reset the limit switches, and align the pinion to the rack so the motor runs without fighting the hardware.
Swing Gate Motor Repair
Swing gate motors on older Haltom City ornamental iron gates often fail because the post has tilted and the gate panel now drags on the pad. We re-plumb the post, reset the hinges, and only then do we service or replace the motor. Replacing a swing motor on a tilted post is a waste of money, and we won’t do it.
Gate Access Control in Haltom City
Gate access control in Haltom City covers the keypad, the remote receivers, the safety photocells, the vehicle loop detector, and the control board that ties them together. On older no-HOA properties, we frequently see all of these fail at once because they’ve been deferred for years, not because of a single fault.
Keypad replacement in Haltom City typically runs $120 to $260 installed. A new control board runs $180 to $380. If the whole access system, keypad, board, photocells, and receivers, needs replacing, expect $500 to $950. We test each part before recommending replacement, and the price is always written and agreed before we touch anything.
Keypads and Remote Controls
Haltom City weather is hard on outdoor keypads. The North Texas sun bakes the housing until it cracks, and then rain gets inside and shorts the board. We carry compatible keypads and remote receivers for most major brands, and we’ll program them on-site while you watch.
Safety Sensors and Loop Detectors
A gate that stops on its own and beeps is usually the safety photocell telling the board the path is blocked, or a failed loop detector that can’t see the car. In Haltom City, loop detectors buried under concrete driveways and alley aprons fail from soil movement and water intrusion. We test the circuit before condemning the sensor, so you don’t buy a part you didn’t need.
Trusted Brands We Service in Haltom City
We’re factory-trained on nine major gate and opener brands, and in Haltom City we most commonly service LiftMaster slide-gate systems, Linear swing operators, and older Viking and DoorKing units on commercial-style residential gates. We carry or can quickly source parts for these brands, which means fewer Haltom City jobs wait on a backordered part from a distributor. Electric Gate Repair in Haltom City is a big part of what we do, and we keep the most common Haltom City part numbers in stock so a failed control board doesn’t leave your gate open for three days. Ghost Controls and other brands are covered too, but those three are the ones we see most on Haltom City’s older gate stock.
Common Electric Gate Repair Problems We See in Haltom City Homes
- Post heave from Blackland Prairie clay: Haltom City’s expansive soil swells after heavy rain and shrinks hard during drought. That cycle tilts gate posts out of plumb, which binds swing gates and drags rack-and-pinion slide gates until something lets go.
- Back-alley gate strikes: Rear service alleys run behind many older Haltom City grid neighborhoods, and garbage trucks hit those gates more than anyone plans for. Cracked hinge-post welds and knocked-out control boxes are routine tickets here.
- Ice-storm damage on older ornamental iron: Winter ice loads snap hinges and warp frames on gates that have been deferred for years. Haltom City gets ice more reliably than snow, and a quarter-inch of ice on a heavy iron gate is an enormous lever.
- Aged access systems failing together: On no-HOA tract homes and rental properties, keypads, loop detectors, and control boards often fail within the same season. The deferred maintenance catches up all at once, and the gate stops responding right when the tenant or new owner needs it daily.
Pricing for Electric Gate Repair in Haltom City, TX
Haltom City sits in the middle of the Dallas-Fort Worth pricing band for gate work. You’ll generally pay $185 to $340 for a control board, keypad, or photocell replacement, $220 to $480 for a motor repair, and $450 to $900 for a full motor and drive assembly replacement. Post reset and re-plumb work, which is uniquely common in Haltom City because of the clay, adds $150 to $400 depending on footing condition and whether concrete work is needed.
We give a written quote before any work starts, so you’ll never face an invoice that’s bigger than what we agreed. Estimates are free. Call (828) 426-7081 and tell us what your gate is doing. We’ll ask a few questions, give you a range, and get a tech to your Haltom City address on a schedule that works for you.
We Also Serve Cities Near Haltom City
Our gate repair crews cover Haltom City and the surrounding Tarrant County communities, including Fort Worth, North Richland Hills, Hurst, and Bedford. If your gate is on the Haltom City line or you manage properties across the Mid-Cities, we can usually reach those areas just as quickly. Call (828) 426-7081 and let us know where you are.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Haltom City
In Haltom City, it’s almost always the post. Blackland Prairie clay heaves the footing out of plumb between drought and heavy rain, and a tilted post drops the gate panel onto the concrete. We’ll check the post with a level before we touch the panel. If the post has moved, we reset and re-plumb it. If the panel is actually bent, that’s a separate repair, and we’ll show you before we recommend it. Call (828) 426-7081 for a free estimate on either fix.
Yes, and this is one of the most common tickets we run in Haltom City’s older grid neighborhoods. We re-weld cracked hinge plates, re-square knocked-out control boxes, and straighten or replace the post. We also check that the gate still trips the safety sensors and loops correctly after the repair. Because the alley has to stay clear for truck access, we schedule this work tightly and verify the gate cycles clean before we leave. Call (828) 426-7081 to get on the schedule.
Almost always the safety photocell. The beep is the control board telling you the safety circuit is interrupted, usually because a sensor is dirty, misaligned, or failed. We test the photocell circuit before touching the motor. If the sensor is dead, replacement in Haltom City typically runs $120 to $220. If the motor is actually dead, that’s a separate diagnosis and we’ll show you the failed part before recommending the repair. Call (828) 426-7081 for a free diagnostic.
Yes, we install and repair solar gate openers for Haltom City properties where running line voltage to the gate isn’t practical. Solar openers use a low-voltage battery system charged by a panel, and they work on both swing and slide gates. The sizing has to match the gate weight and the available sun, which is a real consideration on Haltom City lots with mature tree cover. We’ll spec the right panel and battery for your gate and give you a written price before any work starts. Call (828) 426-7081 to talk it through.
On Haltom City slide gates, the usual cause is post and rail movement from expansive clay. When the footing shifts, the pinion gear climbs out of the rack, and the gate either jerks or stops mid-travel. We re-level the rail, re-plumb the post, and reset the pinion engagement, then run the gate through a full open-close cycle to confirm the limit switches land correctly. If the post is too far gone, we replace the footing. Call (828) 426-7081 for a free estimate on a post reset and realignment.
We were called to a LiftMaster slide gate wedged half-open on a rear service alley lot in the Haltom City grid. Concrete washout had shifted the post footing and dumped the rack and pinion out of alignment. The alley had to stay clear for garbage trucks, so we reset and re-plumbed the post footing, re-leveled the rail, and re-set the limit switches. We confirmed the safety photocell and loop detector were operating before we re-opened the alley lane. That job took one afternoon, and the gate has cycled clean since.
When you call Warden Gate Repair, you get a straight answer and a written price before any work starts. Every tech is background-checked, identity-verified, and photo-badged. Every repair carries the 365-Day Done Right Promise. If your Haltom City gate is down, dragging, or beeping at you, call (828) 426-7081 now and talk to a live person.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Haltom City and the surrounding Tarrant County communities.