Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Arlington
Our Arlington Gate Motor Repair usually runs between $185 and $520 depending on what failed. A bad capacitor or limit switch sits at the low end; a burned-out motor or full operator replacement lands higher. We’ll give you the written price before any work starts, so there’s no surprise at the end. If your gate won’t open, hums but doesn’t move, or trips its breaker every afternoon, call us at (828) 426-7081. We answer live, 24/7, and we know Arlington’s gates better than anyone.
Why Warden Gate Repair Is Arlington’s Preferred Gate Motor Repair Company
Arlington homeowners keep calling us for one reason: we tell them exactly who’s coming and exactly what it costs. Before our technician arrives, you get a name, a photo, and a written price. That’s the Threshold Standard, and we enforce it on every single visit. No anonymous van, no vague estimate, no wondering who’s at the gate.
We work across Arlington daily. From Viridian and Interlochen in the north to the older subdivisions off Sublett Road and Matlock, our techs know which builders cut corners on conduit and which clay pockets heave posts out of plumb fastest. When someone in Pantego or Dalworthington Gardens calls about a gate motor that quit, we already know what we’re likely to find.
Gate Remote Control in Arlington
Gate remote control problems in Arlington usually come down to three things: a dead receiver board, a failed antenna, or interference from the dense build-out of newer neighborhoods. We diagnose the exact failure, then replace or reprogram the remote to your operator. A typical remote replacement in Arlington runs $45 – $95 per remote, and a receiver board replacement lands between $140 and $260.
Reprogramming Existing Remotes
If your remote stopped working after a power surge or a battery change, the fix is often a simple reprogram. We match your remote to brands like DoorKing, Viking, or Ghost Controls, and we offer Arlington Doorking service for programming and support. This runs $35 – $85 in Arlington and usually takes under an hour on site.
Adding a Second or Third Remote
Families with multiple drivers often need extra remotes for a swing gate off Cooper Street or a slide gate near Lake Arlington. We program and test every remote before we leave, so you’re not standing at the gate clicking a button that does nothing. Expect $45 – $95 per new remote, depending on the operator brand.
Gate Keypad in Arlington
Gate keypad failures in Arlington are common in neighborhoods where HOA rules require keypad access for landscapers and pool crews. A gate keypad that won’t accept codes, lights up but doesn’t trigger the motor, or has a cracked housing from hail usually needs replacement or wiring repair. Keypad replacement typically runs $120 – $260, including programming to your existing operator.
Hardwired vs. Wireless Keypads
Hardwired keypads on Arlington gates suffer from corroded terminals after North Texas rain seasons. Wireless keypads lose signal when the mounting post shifts. We install either style, matched to Viking, Elite, or DoorKing operators, and we test every code before we hand it back.
Keypad Integration With Intercom Systems
Some Arlington communities pair a keypad with a telephone-entry system on a shared driveway gate. We handle the wiring and programming for both, so visitors can enter a code or call your phone and get buzzed in. That work ranges from $180 to $400 depending on configuration.
Trusted Brands We Service in Arlington
Our Gate Motor Repair team is factory-trained on Viking, Ghost Controls, DoorKing, and Elite, among other major brands. We keep common boards, arms, capacitors, and remote kits stocked for Arlington service calls, which means many repairs finish the same day as the diagnosis. When a part isn’t on the truck, we order it that day and schedule the return visit before we leave your driveway.
Common Gate Motor Repair Problems We See in Arlington Homes
- Thermal overload trips in new subdivisions. Builder-grade operators in Viridian, Lake Port, and other master-planned communities run undersized for the gate weight and North Texas heat. By mid-afternoon in July and August, the motor overheats and shuts down.
- Voltage drop from missing conduit runs. Many newer Arlington homes had gates installed manually with no dedicated power run. Later, when owners add automation, someone taps an extension cord or undersized wiring, and the motor strains every cycle.
- Clay soil shifting hinge posts. The Blackland Prairie clay under Arlington swells when wet and shrinks when dry. Posts lean, gates drag, and motors burn out trying to move a gate that was perfectly balanced six months ago.
- Hail and wind damage to keypads and remotes. Arlington sits in the severe thunderstorm corridor. Straight-line winds over 60 mph bend hinge brackets, and hail cracks keypad housings and antennas. These failures show up days after a storm front passes through.
Pricing for Gate Motor Repair in Arlington, TX
Here’s what Arlington homeowners should expect. Capacitor replacement: $85 – $150. Limit switch or reverse sensor repair: $120 – $220. Circuit board replacement: $180 – $380. Full operator replacement with labor: $450 – $1,200 depending on the gate size and operator type. A post re-set in clay soil runs $200 – $450 per post. The written price is yours before we touch a tool, and it doesn’t change unless you ask us to do additional work. Call us for a free estimate: (828) 426-7081.
We Also Serve Cities Near Arlington
Beyond Arlington, we run calls into Mansfield, Kennedale, Burleson, and Cedar Hill. If you’re on the edge of Gate Motor Repair in Arlington territory and your gate is down, call us. We’ll tell you whether your address falls in our service area and give you a straight answer on timing. Cole Rafferty and the team coordinate dispatch from our Dallas-Fort Worth office to serve Arlington locally.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Arlington
Most Arlington overheating failures trace back to an undersized builder-grade operator or a gate that’s dragging on misaligned posts from clay soil movement. A thermal overload trip means the motor is pulling more current than it was rated for, usually because the gate weighs more now than it did at installation. The fix is a heavier-duty operator and often re-setting the hinge post in a deeper concrete footing. Call (828) 426-7081 and we’ll diagnose it on site.
Yes, in most cases. Two options: a solar-powered operator works well for Arlington’s sunny climate, and a low-voltage DC operator can run on a battery charged by a small solar panel. If your gate has no conduit, trenching for a dedicated 110V line is the more reliable long-term choice. We’ll price both options in writing before you decide. Estimates are free.
Dragging is rarely a hinge problem in Arlington. It’s the post. The Blackland Prairie clay here swells and shrinks with every wet-dry cycle, and a post that was plumb at installation can lean two or three inches after one season. Lubricating hinges won’t fix a leaning post. The post must be excavated, re-set with proper concrete depth, and the gate re-hung. We do that work regularly across Arlington.
The most common cause in Arlington is a failed relay on the operator control board, which means the keypad is sending the signal but the board isn’t activating the motor. Second most common: a broken wire connection between the keypad and the operator, often caused by post movement pulling the wiring. We trace the signal, find the break, and repair it. Board replacement runs $180 – $380; wire repair is usually under $100.
UL 325 compliance means the operator includes photo-eye sensors or contact edges that reverse the gate if something is in the path, plus a force setting that reverses before crushing force is applied. Every operator we install in Arlington meets UL 325. If your existing operator lacks working safety sensors, we’ll flag it and quote the upgrade. Call us for a written assessment: (828) 426-7081.
Arlington’s Clay Soil and Builder-Grade Operators: The Real Problem
In Arlington’s newer master-planned subdivisions, gates are often built as manual but with conduit omitted entirely. Adding a gate operator later means trenching for power or switching to solar. Worse, many builder-grade operators installed here are undersized and degrade quickly in North Texas heat. We were called to a home in the Viridian development in north Arlington where the builder had installed a LiftMaster operator on a swing gate, but it kept tripping the thermal overload by mid-afternoon. The gate post was also beginning to lean from clay movement, so we re-set it in a deeper concrete footing, corrected the sag, and replaced the operator with a heavier-duty model that could handle the heat and the gate’s weight. No more callbacks.
That’s the Arlington pattern. The clay under this city moves more aggressively than in surrounding sandier markets, and the builder-grade electronics fail faster than they would in a milder climate. If your gate was installed when the house was built, and that was 10 or 15 years ago, the original operator is living on borrowed time. The failure isn’t your fault. But the fix needs to account for why it failed, or you’ll be replacing the motor again in two summers.
Call Warden Gate Repair in Arlington
If your gate motor is dead, overheating, grinding, or not responding to remotes and keypads, call (828) 426-7081 for our Electric Gate Repair in Arlington. You’ll speak to a live person, not a voicemail. We’ll schedule a visit with a background-checked, photo-badged technician whose name and picture you’ll have before the doorbell rings. The written price comes before any work starts. Every repair carries the 365-Day Done Right Promise: if it fails within a year, we return and fix it free. Cole Rafferty and the Warden team work Arlington daily. We’ll get your gate moving again.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Arlington and the surrounding DFW area.