Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Keene
Gate motor repair in Keene typically runs $180 to $340 for most common fixes, and a failed control board replacement usually lands between $250 and $475. Those are real numbers from real jobs on the clay-heavy lots around town. If your gate motor (the box that slides or swings your gate automatically) has quit, stalled after rain, or started groaning like it’s working too hard, call us at (828) 426-7081 for a written quote before anyone turns a wrench. We serve every corner of Keene, from the neighborhoods around Southwestern Adventist University out to the acreage properties at the town’s edges.
Why Warden Gate Repair Is Keene’s Preferred Gate Motor Repair Company
We’ve spent enough time on Keene’s Blackland Prairie clay to know the ground here moves. That’s the thing most gate repair companies miss. Out-of-towners show up, replace a motor, and leave, only for the same problem to return six weeks later because the real culprit was a heaving hinge post. Our crew lives in the rhythm of this soil: wet spring, dry summer, post out of plumb, gate dragging, motor burning out. We diagnose with that context in mind.
Cole Rafferty runs our Keene work personally. When you book, you’ll get the technician’s name and photo before the visit, and that tech will show a photo ID badge at your door. No anonymous van, no stranger standing in your driveway. It’s what we call the Threshold Standard, and every Warden visit enforces it. People in Keene tell us this matters more than a lower quote, and we agree.
Our dispatchers answer the phone live, 24 hours a day. If a gate has failed on a Saturday evening and your car is stuck on the wrong side of it, you’ll reach a person, not a voicemail. For Keene zip codes, we typically have a technician en route the same day for genuine emergencies.
Gate Remote Control in Keene
Gate Remote Control service in Keene covers reprogramming, replacement, and range fixes for remotes that have lost sync or stopped triggering your opener. On a long rural driveway off FM 2280 or County Road 304, range issues get worse because the receiver is typically mounted near the operator, far from where you actually press the button in your truck. We often install an extended-range antenna kit or reposition the receiver to solve that. A replacement remote for most brands runs $45 to $85, and full reprogramming including clearing old codes from the board runs $90 to $150.
Lost and Stolen Remotes
A lost remote is a security problem, not just an inconvenience. We clear every code from the opener and reprogram only the remotes you still hold. That kills the old remote’s access permanently. The job takes under an hour in most Keene yards, and we do it while you watch.
Range and Interference on Larger Lots
Keene’s semi-rural properties, especially the quarter-acre-plus lots, often have metal buildings, horse fencing, or tree lines between the house and the gate. That can knock a remote’s range down badly. We test the actual signal at your gate entrance and adjust receiver placement or antenna type to get you reliable open-from-the-truck performance.
Gate Keypad in Keene
Gate Keypad installation and repair in Keene means wiring a weather-rated keypad at your driveway entrance and programming access codes for family, delivery drivers, or ranch hands. A new wired keypad with professional installation runs $175 to $260. Standalone solar-ready wireless keypads for gates without nearby power run $115 to $190 installed.
Wiring and Weather Sealing
Keene’s summer heat eats cheap keypad housings. The plastics warp, the numbers fade, and rain gets inside the casing after the seal fails. We use keypads rated for direct sun and hard rain, and we seal the wire entry with silicone at the conduit. It’s a small thing that makes a keypad last years instead of one season.
Programming Access Codes
You should be able to change codes yourself, and we’ll set your keypad up so you can. Most Keene customers want one main owner code, a temporary code for contractors, and a permanent code for regular visitors. We walk you through adding and deleting codes before we leave.
Key Takeaways:
- Gate motor repair in Keene averages $180 to $340; control boards run $250 to $475.
- Blackland Prairie clay heaves posts, and that soil movement causes most local motor failures.
- Every tech is background-checked, photo-badged, and named to you before arrival.
- 365-Day Done Right Promise: if our repair fails, the return visit is free.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Trusted Brands We Service in Keene
Warden Gate Repair is factory-trained and authorized on nine major gate and opener brands, including FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. For Keene customers that means we can usually walk into a job with the right board, gear, or sensor already on the truck instead of ordering parts and making you wait a week. We keep a local parts stock for the older FAAC and Linear models that are still everywhere on rural Johnson County driveways. If your gate opener predates your truck, we can probably still get parts. Call us at (828) 426-7081 and we’ll tell you straight.
Common Gate Motor Repair Problems We See in Keene Homes
- Post heave and gate drag. The shrink-swell clay here moves posts out of plumb after every wet-dry cycle. The motor gets blamed, but the binding gate is dragging on a shifted post footing and overloading the operator.
- Plastic gear housing cracks. Hard freezes, like the February 2021 storm, crack plastic gear housings and seize unprepared operators. We replace the gear assembly and show you how to winterize the unit before the next cold snap.
- Sagging wooden gate boards. Summer heat over 100°F warps wooden gate boards, throwing the gate out of alignment and tripping the safety photocell so the gate reverses or refuses to close. We re-level and often install a steel anti-sag frame.
- Solar and battery failure on rural openers. Long driveways far from house power often run solar gate openers. The heat kills batteries faster here, and a dead battery is the most common reason a solar opener in Keene stops responding.
Pricing for Gate Motor Repair in Keene, TX
Straight numbers so you know what to expect before you call. A standard gate motor repair in Keene, like a capacitor replacement or limit switch adjustment, runs $180 to $340. Replacing a failed control board runs $250 to $475 depending on brand. Full operator replacement, including labor and a new motor, is $850 to $1,800 for most residential setups, and heavy-duty slide gate operators for wide farm gates on acreage properties run from $1,600 up. Add a solar power kit for a long driveway and you’re looking at $500 to $1,200 more. Every quote is written and agreed before work starts. No surprise line items. Call (828) 426-7081 for a free estimate, and we’ll price your exact gate over the phone.
We Also Serve Cities Near Keene
Our Gate Motor Repair crews cover Keene and the surrounding Johnson County communities, including Keene neighbors Cleburne, Joshua, Alvarado, and Burleson. If your gate is in any of these towns, the same Warden techs, pricing policy, and 365-Day Done Right Promise apply. Same written quote before work, same name and photo before arrival.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Keene
Usually not. The most common cause in Keene is Blackland Prairie clay heaving a hinge post out of plumb, so the swing gate drags on the ground and overloads the motor. We check post alignment and gate weight first before condemning an operator. On a quarter-acre-plus property near the edge of town, we answered a call for a LiftMaster gate operator that stopped mid-travel after a hard rain. The real problem was a heaved hinge post. We reset and re-plumbed the post footing, did a sag correction, re-leveled the gate, tested the safety photocell, and reprogrammed the Gate Remote Control and Gate Keypad. The operator didn’t need replacing. Call (828) 426-7081 and we’ll check your posts before selling you a motor.
Yes, and for many Keene acreage properties it’s the only practical option when no line power runs to the gate. We install heavy-duty solar gate openers sized for the panel wattage and battery draw of your specific gate weight and width. On a rural acreage call, we swapped in a heavy-duty solar opener and new rack and pinion for a 16-foot tube-steel farm gate; the old operator had cracked during a February freeze. Expect to budget for a properly sized panel and battery bank, not a box-store solar kit. We’ll spec and install the whole system, and our 365-Day Done Right Promise covers it.
A motor that hums but doesn’t move often has a bad capacitor, which is a $20 part and a service call. A motor that works intermittently may have a failing limit switch or a board issue. A motor that’s burned out entirely typically won’t respond to any input and may smell hot. We diagnose the electrical and mechanical cause before recommending a replacement. If a repair will hold, we tell you. If you’ve been getting repeated failures, the strain from a heaving post or sagging gate may have already damaged the motor windings, and replacement is the honest call. We’ll price both repairs and replacement so you can decide with real numbers.
It’s the clay again. After a good rain, Keene’s shrink-swell soil pushes fence and gate posts upward and outward, pulling the latch out of alignment. The gate settles back as the soil dries, but each cycle leaves a little more movement. We can reset the post and re-level the gate so the latch engages cleanly, and we’ll tell you whether a sag frame would slow future movement. This is exactly the kind of job where a quick post re-plumb saves you a motor replacement later. Call (828) 426-7081 and we’ll send a technician by name before he arrives.
We do. Warden Gate Repair is factory-trained across nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Keene customers that means we service the full range you’ll find on the town’s mix of mid-century homes and newer ranch-style lots, plus the older agricultural tube-steel gate hardware common at the town’s edges. We also handle solar openers, rack and pinion retrofits, and safety photocell and loop detector systems. The right parts come with the right knowledge, on the first truck. Call (828) 426-7081 for a free estimate over the phone.
If your gate motor has failed, stalled after rain, or started reversing instead of closing, call Warden Gate Repair at (828) 426-7081 now. We’ll quote your repair in writing before any work begins, with no hidden line items at the end. You’ll know the technician’s name and see a photo before he knocks. And if the repair isn’t right, the 365-Day Done Right Promise brings us back free. A warden is trusted to watch over a place and keep it secure. That’s the whole idea behind a gate.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Keene and Johnson County.