Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Keller
Gate motor repair in Keller typically costs $220 – $485 for most operator failures, and our crews reach most Keller neighborhoods the same day you call. We’re the team that shows up knowing your gate posts sit on Blackland Prairie clay, not just any dirt. That matters more than you’d think. Call (828) 426-7081 and you’ll get a live person, a written price, and a technician’s name and photo before anyone knocks on your door.
Why Warden Gate Repair Is Keller’s Preferred Gate Motor Repair Company
Keller homeowners call us because we treat gate repair as a trade, not a sideline. Our Gate Motor Repair crews work exclusively on gates and openers, and we’ve seen every failure mode the Keller climate can throw at a driveway entrance. The Threshold Standard applies on every visit: a background-checked, identity-verified technician whose name and photo you receive before arrival. When the doorbell rings, you already know exactly who is standing there.
Cole Rafferty, who leads our team, built our Keller service around one observation: most gate breakdowns here aren’t electrical. They’re structural. The clay shifts, the post leans, and the motor gets blamed. That’s why our diagnostics start with post plumb before we ever open the operator housing. Keller customers who’ve had two other companies replace parts that didn’t fix the problem understand the difference.
We answer our phones 24/7 with a live person. No voicemail trees, no chatbots. When your gate won’t open at 7 a.m. on a Tuesday, you’ll talk to a human who can dispatch someone that day. Every repair carries our 365-Day Done Right Promise in writing: if the fix doesn’t hold, the return visit is free.
Gate Keypad in Keller
A gate keypad in Keller lets you open your driveway gate with a code instead of a remote, and replacing or repairing one typically runs $145 – $280 including parts and labor. Keller’s sun exposure takes a toll on keypads faster than most people expect. The polycarbonate faces on older units cloud and crack after ten or twelve Texas summers, and moisture gets into the membrane switches underneath. We stock weather-sealed keypads rated for direct sunlight and replace the entire face assembly rather than patching a failing unit.
Hard Freeze Damage to Keypads
The February 2021 freeze event in North Texas exposed a lot of keypads that weren’t sealed against ice expansion. When water works into the keypad housing and freezes, it can crack the circuit board or separate the ribbon cable from the keypad membrane. We see this most often on 15 – 30 year old original-equipment keypads on Keller’s 1990s and 2000s custom homes.
Adding a Second Keypad for Guest or Delivery Access
Many Keller homeowners add a second keypad on the inside of the gate post or at a side pedestrian gate. This costs $160 – $310 depending on whether we need to run new low-voltage wire or can tie into the existing operator control board. We’ll wire it clean and program it on site, then show you how to set and delete codes yourself.
Gate Closer Spring in Keller
A gate closer spring in Keller does the quiet work of pulling your swing gate back to center and holding it there, and replacing one typically runs $180 – $340 depending on whether the spring is a torsion type or an extension type. When a closer spring snaps, you’ll usually hear it. One loud crack and the gate will swing freely or won’t fully close at all. That’s a safety issue on a driveway gate, especially one that opens onto a street.
Torsion vs. Extension Springs on Keller Gates
Older ornamental iron gates in Keller almost always use extension springs that stretch and weaken over time. Torsion springs, mounted on the hinge post, store energy in a wound coil and last longer but cost more to replace when they fail. We’ll identify which type your gate uses and give you a written price for the exact replacement before we unbolt anything.
When a Closer Spring Isn’t the Whole Problem
If the closer spring snapped, there’s usually a reason. A post that’s leaned out of plumb puts uneven tension on the spring every time the gate cycles. We check post alignment and hinge wear whenever we replace a spring, because a new spring on a racked gate will fail again within a year or two. Keller’s clay soil makes this check non-negotiable.
Trusted Brands We Service in Keller
Our factory-trained technicians service Viking, Ghost Controls, DoorKing, and Elite operators, along with the rest of the major brands you’ll find on Keller driveways. We keep common control boards, limit switches, and receiver modules for these brands on our service vehicles so the right part arrives with the technician, not three days later. If your operator is a Viking or Ghost Controls model from the 2000s, we likely have the exact replacement component in the truck when we pull up to your house. That speed matters when your gate is stuck open and your driveway is no longer secure.
Common Gate Motor Repair Problems We See in Keller Homes
- Posts that lean and bind the operator arm. Blackland Prairie clay expands in spring rains and contracts hard in July. A gate post that shifts 2 – 3 inches puts the operator arm past its torque limit, and the motor trips or burns out. We check post plumb on every single diagnostic call in Keller before we touch a circuit board.
- Summer grease breakdown in slide gate rollers. Keller’s 100-degree summers cook the grease out of rack and pinion systems and slide gate rollers, leaving them dry and seized. Chain skip and roller wear show up most often in August, right when homeowners least want to be outside fixing a gate.
- Hard freeze damage to hydraulic actuators. The 2021 Uri freeze event cracked hydraulic lines and seized swing gate actuators on 15 – 30 year old operators all over Keller. If your gate worked fine before a freeze and won’t move now, the fluid lines likely took the hit even if the motor itself is fine.
- Weld fatigue on ornamental iron gates. Keller’s 1990s and 2000s custom homes are aging into a predictable pattern: the ornamental gate welds fatigue at the hinge points at the same time the operator starts binding. Weld cracks let the gate sag, the sag racks the frame, and the operator strains against it. We repair the weld, re-plumb the gate, then service the motor. In that order.
Pricing for Gate Motor Repair in Keller, TX
Here’s what Keller homeowners can expect to pay for common gate motor repairs. A diagnostic service call runs $85 – $120, and that amount is credited toward the repair if you approve the work. Control board replacement: $210 – $420. Limit switch adjustment or replacement: $110 – $240. Gate keypad replacement: $145 – $280. Gate closer spring replacement: $180 – $340. Operator arm re-alignment after post movement: $160 – $380 depending on whether the post footing needs re-setting. Full operator replacement on a standard single-swing driveway gate: $1,200 – $2,800.
Our written price is quoted and agreed before any work starts. If the technician finds something unexpected, they call you first and get approval before proceeding. No surprise line items on the invoice at the end. Estimates are always free.
We Also Serve Cities Near Keller
Our Keller crew handles gate motor repair across the surrounding area, including Haslet, North Richland Hills, Roanoke, and Southlake. If you’re in one of those cities and your gate operator isn’t cooperating, call the same number and you’ll get scheduled from the same Keller-based dispatch team. The drive is short and the pricing doesn’t change just because you’re a few miles down 377.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Keller
Not necessarily. A humming motor usually means power is reaching the operator but something is stopping the gate from moving, and in Keller that something is often a post that leaned out of plumb after spring rains. The operator arm binds against the misaligned frame and trips its torque limit or stalls the gearbox. We check post plumb before condemning any motor. Call (828) 426-7081 and we’ll diagnose it properly.
Test your photocells every three to four months, and more often if your gate faces west into the afternoon sun. Dust, pollen, and grass clippings reduce the beam strength, and a weak beam can cause your gate to reverse or refuse to close. A quick alignment check takes us about fifteen minutes and costs $85 – $120, credited toward any repair if we find something wrong.
Summer heat in Keller breaks down the grease in your slide gate’s rack and pinion system, and the chain slack increases as the lubricant thins and the metal expands. When the chain skips, the gate jumps forward instead of moving smoothly. We clean and re-grease the rack, adjust chain tension, and check the rollers. This is a $110 – $240 service on most Keller slide gates.
First check the visible signs: condensation behind the keypad face, a cracked housing, or buttons that don’t click. Freeze damage usually means moisture got inside and expanded. We replace the keypad and seal the low-voltage connections against future water intrusion. A replacement runs $145 – $280 in Keller, and we’ll program your codes on site.
Yes, in most cases. Sagging iron gates in Keller usually suffer from weld fatigue at the hinge points plus a post that’s tilted on clay soil. We repair the welds, re-set or shim the post, perform sag correction on the frame, and then service the operator so it runs clean on the re-plumbed gate. The alternative, replacing the whole gate, is rarely necessary on Keller’s custom ornamental gates unless the metal itself is rusted through.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Keller with gate motor repair and operator diagnostics. Call (828) 426-7081 for a free estimate and a written price before any work begins.