Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Keller, TX
Warden Gate Repair is the gate company Keller homeowners call when a driveway gate won’t open, binds halfway, or leans visibly out of plumb. Most Keller gates were installed 15 to 30 years ago alongside the city’s big 1990s – 2010s build-out, and the Blackland Prairie clay underneath them shifts through every wet and dry season. That combination of aging hardware and moving soil means a Keller gate job usually involves two things at once: repairing the mechanical or electrical fault, and correcting the post movement that caused it. Call (828) 426-7081 for a written price before any work starts.
Why Keller Homes Are Different
Keller sits on expansive clay that absorbs spring rain and bakes hard through the summer. Posts set in that soil can lean 2 or 3 inches in a single season, which throws swing gates off their hinges and binds slide gates in their tracks. We routinely find a gate that “just stopped working” in July has a post that moved during the spring wet cycle, torquing the operator past its limit. The fix starts with plumb, then moves to the electrical work.
The housing stock compounds it. Most Keller homes were built between the 1990s and 2010s as large-lot custom and semi-custom builds, and many have ornamental wrought-iron or tubular steel driveway gates installed during original construction. Those gates are now hitting the age where actuators wear out, hinge welds fatigue, and circuit boards fail – often all at the same time as the post shifts. North of the Tarrant Parkway corridor and into the eastern and northern edges of town, you’ll also find ranch-style pipe gates and wood farm gates on larger rural parcels, which have their own set of wheel, hinge, and chain problems.
Summer heat above 100°F accelerates grease breakdown in slide rollers and warps thinner aluminum frames. The hard freeze Keller saw during the 2021 Uri event cracked hydraulic lines on swing actuators and seized others. None of this reads like a textbook gate failure; it reads like a Keller gate failure, and we diagnose it that way.
Our Main Keller Services
Keller homeowners most often call us for one of three things: a gate that won’t move, a motor that runs without moving the gate, or an electrical fault somewhere between the keypad and the operator. Each has its own dedicated Keller page below.
Gate Repair in Keller
Most Gate Repair in Keller calls start with a gate that drags, jams, or won’t latch, and a surprising number trace back to a post that has moved in the clay. We re-set posts, re-align hinges, repair broken welds, and replace worn rolling hardware like wheels, rollers, and track sections. Before we touch the opener, we check the gate’s swing or slide by hand to isolate structural issues from mechanical ones. Read the full Keller-specific breakdown, including pricing, on its own page.
Electric Gate Repair in Keller
Electric gate failures in Keller usually involve the control board, safety sensors, keypad, or wiring between the operator and the house. The local angle is heat: summer temperatures push older circuit boards and solder joints past their limits, and 2021-grade freezes crack hydraulic lines on swing actuators. Our Electric Gate Repair in Keller page covers exactly how we troubleshoot and what the common Keller failures cost to fix.
Gate Motor Repair in Keller
The gate motor is the box that slides or swings your gate automatically, and in Keller it often works harder than it should because the gate it’s moving is slightly out of alignment. We replace or rebuild gate motors for sliding and swinging gates, service the drive arms and chains, and recalibrate limit switches after any repair. When the post has moved and stressed the motor, we correct both. Gate Motor Repair in Keller has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Keller
We service FAAC, BFT, Linear, and Viking gate operators, along with the full range of our brands. Parts for these systems are kept stocked locally, so most Keller repairs don’t wait on a shipment. The right brand knowledge and the right part usually arrive together on the first trip.
Pricing for Gate Company in Keller, TX
| Service | Typical range in Keller |
|---|---|
| Site visit and diagnosis | $59 – $99, credited toward repair |
| Gate post re-setting | $250 – $700 |
| Hinge replacement and re-alignment | $150 – $450 |
| Slide gate roller replacement | $180 – $350 |
| Control board replacement | $350 – $900 |
| Gate motor replacement | $550 – $1,400 |
| Chain or belt replacement | $180 – $420 |
| Hydraulic line repair | $220 – $650 |
| Safety sensor repair or replacement | $150 – $350 |
| Keypad or intercom wiring repair | $125 – $300 |
What pushes a Keller price toward the top of any range is usually post movement. A gate that has shifted 2 inches in the clay costs more to correct than a simple board swap, and the price reflects that honestly before we begin. Every Keller job gets a written price quoted and agreed before any work starts, and the 365-Day Done Right Promise means a free return visit if the repair doesn’t hold.
Neighborhoods We Serve in Keller
We work across Keller’s established subdivisions and the newer builds east of Highway 377, plus the larger acreage parcels on the city’s northern and eastern edges. Typical response time for the Keller area is same-day or next-day depending on the call’s urgency and our tech’s route.
- Hidden Lakes
- Ridge Point
- Keller Town Center area
- Floyd Hill
- Northern and eastern rural-edge parcels
Service Area – Cities Near Keller
Warden Gate Repair serves Keller and the surrounding communities inside the DFW metro, with dispatch coordinated from the Dallas-Fort Worth office and crews based locally. If your gate is in Haslet, TX, North Richland Hills, TX, Roanoke, TX, or Southlake, TX, the same written-price-before-work standard applies.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Keller
If your gate is stuck open or won’t close, we prioritize it. Same-day response is common for Keller calls placed before early afternoon, and our phone line is answered by a live person 24/7. Call (828) 426-7081 and we’ll tell you honestly when a tech can be there.
Most repairs and like-for-like operator replacements don’t trigger a permit, but new gate installations and significant structural changes may. We’ll tell you what Keller requires for your specific job and factor any permit into the written price before work starts.
Yes. Keller’s ornamental iron gates, especially the custom and semi-custom work from the 1990s – 2010s boom, can usually be welded and refinished to match the original. We’ll assess the extent of the damage at the estimate and tell you before the quote whether it’s a repair or a rebuild.
If your Keller gate is sagging, binding, or won’t respond, call (828) 426-7081. We’ll give you a written price before any work begins, and you’ll know exactly who’s coming to your door before the tech arrives.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.