Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Haslet, TX
Warden Gate Repair is the gate company Haslet homeowners and Alliance Corridor facility managers call when a gate stops doing its job. Most gate problems here trace back to two things: the Blackland Prairie clay under the posts, and builder-grade operators installed a decade or more ago that are now past their useful life. Whether it’s a sagging ornamental iron entry gate in a 2010s subdivision or a truck-entry slide gate that won’t close at an Alliance Gateway dock, we quote a written price before any work begins. Call (828) 426-7081 and a live person answers, day or night.
Why Haslet Homes Are Different
Haslet sits on Blackland Prairie clay that swells hard in wet springs and shrinks just as hard in summer drought. That cycle heaves gate posts, throws hinges out of line, and yanks automated gates off their tracks on what feels like a seasonal schedule. In the neighborhoods built through the 2010s and early 2020s, production builders set many gate posts on shallow footings, and that clay movement exposes the shortcut faster than almost any other condition. Post lean and hinge misalignment are routine calls here, not rare ones.
Then there’s the Alliance Corridor effect. The distribution and logistics parks along Alliance Gateway run heavy automated slide and swing gates under constant semi-truck traffic. Loop detectors set into the asphalt aprons at those truck entries fail at a much higher rate than anywhere residential because heavy axles degrade the detector wire insulation. Loop-detector replacement and re-tuning is one of the most common commercial calls we handle in this corridor. Winter ice storms, which hit this far north in Tarrant County harder than they do Fort Worth proper, add another layer: glazed operators, strained motors, and cracked powder-coat on ornamental iron.
Our Main Haslet Services
These are the three gate problems Haslet calls us about most. Each has its own Haslet page with full pricing and specifics.
Gate Repair in Haslet
Post lean from clay movement, hinge wear and breakage, sagging ornamental iron, and latch or lock failures on swing and slide gates. In Haslet we see the full range, from HOA entry gates to single-family driveway gates. This is the page for anything structural or mechanical that isn’t specifically the motor. Read the full breakdown at Gate Repair in Haslet.
Electric Gate Repair in Haslet
Keypads, intercoms, safety sensors, loop detectors, and low-voltage wiring problems. In Haslet we regularly find that the gate itself is fine; the bug is in the wiring or a sensor thrown off by gate movement or winter ice. That doesn’t make it less urgent, just different. See Electric Gate Repair in Haslet for how we diagnose and fix these systems.
Gate Motor Repair in Haslet
The gate motor (the box that slides or swings your gate automatically) is the part that fails first on builder-grade installs now aging out of warranty. We carry parts for Linear, Viking, Ghost Controls, and DoorKing motors and can usually repair on the first visit. Full detail is on the Gate Motor Repair in Haslet page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haslet
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Haslet, the heavy hitters are Linear and Viking on residential installs, Ghost Controls on newer DIY upgrades, and DoorKing on commercial gates. We keep common parts for those brands stocked locally, which cuts turnaround meaningfully. See our brands for the full list and what each one tends to need.
Pricing for Gate Company in Haslet, TX
| Service | Typical range in Haslet |
|---|---|
| Gate repair service call | $85 – $130 |
| Loose or misaligned gate post fix | $250 – $700 |
| Hinge replacement | $180 – $420 |
| Sagging gate correction | $250 – $500 |
| Gate motor repair (labor only) | $150 – $350 |
| Gate motor replacement (motor included) | $750 – $1,900 |
| Electric gate keypad or intercom repair | $150 – $400 |
| Loop detector replacement and re-tuning | $400 – $1,000 |
| Photoelectric safety sensor replacement | $180 – $350 |
Costs in Haslet run a little higher than the metro average when Blackland Prairie clay has pushed a post out of true, because correcting the footing, not just the gate, is what makes the fix last. Every job gets a written price before work starts, and that price is the one you pay.
Neighborhoods We Serve in Haslet
We cover all of Haslet, from the master-planned communities east of 377 to the acreage lots west of it, and the Alliance Gateway corridor north of town. Response time across Haslet is usually same-day or next-day for repair calls.
- Northstar
- Sendera Ranch
- Copper Creek
- Willow Ridge Estates
- Lost Creek Ranch
Service Area – Cities Near Haslet
In addition to Haslet itself, our crews regularly work in Keller, TX, Roanoke, TX, Newark, TX, and North Richland Hills, TX. Dispatch is coordinated from the brand’s Dallas-Fort Worth office, and all of those cities are within a standard routing window.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haslet
Repair calls in Haslet are usually same-day or next-day. The exact timing depends on the job and where our techs are during the day, but Haslet is inside our normal routing window. Call (828) 426-7081 and we’ll give you a straight answer on timing before you commit to anything.
Most repairs, hinge replacements, and motor swaps on an existing gate don’t trigger a Haslet permit. New gate installations and significant structural changes sometimes do, and your HOA may have its own rules, especially in the master-planned communities. We’ll tell you what your specific job needs before any work starts.
Yes. Truck-entry slide and swing gates along the Alliance Gateway corridor are a regular part of our Haslet work, including loop-detector replacement, motor swaps on heavy-duty operators, and safety-sensor repair. Same written-price process, same 365-Day Done Right Promise, whether it’s a single-family driveway gate or a distribution dock.
If your gate is leaning, stuck, or making a sound it didn’t make last month, call (828) 426-7081. We’ll send a background-checked, photo-badged technician by name and photo before arrival, and you’ll get a written price before any work starts. That’s the whole point of Warden.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haslet Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.