Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Crowley
If your automatic gate in Crowley won’t open, won’t close, or is sagging off its hinges, we can usually have a technician at your property the same day. Most gate repairs in Crowley run between $180 and $480, and you’ll get a written price before any work begins. We know the subdivisions, the clay soil, and the specific operator brands installed across this city during the 2000s buildout. Call (828) 426-7081 and a live person answers, day or night.
Crowley’s housing stock is unique in Tarrant County. From roughly 2000 through the early 2020s, developers built dense waves of HOA subdivisions where ornamental iron swing and slide gates were standard, even on mid-price homes. Those gates are now hitting their first major failure cycle at the same time. We’re the Gate Repair team that understands what that means for your specific street, your specific operator, and your specific timeline.
Why Warden Gate Repair Is Crowley’s Preferred Gate Repair Company
Crowley homeowners tend to call us after a gate has failed twice, or after another company gave a vague quote over the phone. We do things differently. Before our tech arrives, you get their name and photo sent to your phone. When they knock, their photo ID badge matches. That’s the Threshold Standard, and we enforce it on every single visit.
We’re led by Cole Rafferty, and every job carries the 365-Day Done Right Promise. If the repair isn’t right, we come back and make it right at no charge. That promise is in writing, on every invoice. No fine print.
We’ve worked on gates in Hunters Ridge, Creekside, and older sections along FM 1187. The same neighborhoods keep calling back because we show up with the right part, the right training, and no surprises on the bill.
One more thing that matters here: we answer the phone. Not a voice tree. Not a chatbot. A human being, 24 hours a day, 7 days a week. When your gate is stuck open at 10 p.m. and you want it secured, that matters.
IRON GATE REPAIR IN CROWLEY
Iron Gate Repair in Crowley almost always starts with the post, not the gate itself. The Blackland Prairie clay under this city swells in wet springs and shrinks hard in summer drought. That movement heaves hinge posts out of plumb, which throws the gate off the latch and binds the hinges. A gate that closed fine in April won’t latch by July. At that point, pulling the post, pouring a proper concrete bell, and realigning everything is the repair, not a band-aid.
We regularly see ornamental iron swing gates in Hunters Ridge and Creekside with 15-year-old LiftMaster operators on posts that were set too shallow when the subdivision went in. The operator is often blamed for the failure, but the post moved first. We fix the footing, realign the hinges and operator bracket, then address the control board. Typical iron gate repair in Crowley runs $220 to $520 depending on whether the post must be pulled and re-set. You’ll see a written price before we touch anything.
Hinge and Post Work
Worn barrel hinges on iron gates cause sag that scrapes the ground by the latch side. On Crowley’s clay, the sag arrives faster. We weld or replace hinges and re-hang the leaf so the gap is even again.
If the gate has dropped more than half an inch at the latch, the post is usually moving too. We check both before quoting, so you don’t pay for a hinge fix that the next wet season undoes.
Weld and Rust Repair
North Texas storms with high wind and the occasional ice load like February 2021 snap weld joints and twist frames on older ornamental iron. We grind out the failed weld, re-weld with proper penetration, and paint the repaired section. Rust-through on bottom rails is common on gates older than 12 years, and we’ll tell you honestly if patching one section is throwing good money after a gate that needs replacing.
SLIDING GATE REPAIR IN CROWLEY
Sliding Gate Repair in Crowley most often comes down to two things: the track and the drive. Sliding gates on our clay are prone to track misalignment as the ground shifts, causing the gate to bind or jump the rollers. We see this across Crowley’s newer subdivisions where slab movement is a year-two problem, not a year-ten problem.
When a slide gate derails, we reset the track, check the roller carriages, and dial in the operator’s limit switches so the gate stops where it should every time. If the drive chain or belt is worn, we replace it while we’re there rather than letting it snap two weeks later. Sliding gate repair in Crowley typically costs $190 to $460 including parts and labor. Every job gets a written price before any work starts.
Track Realignment and Rollers
A sliding gate that shudders while moving is usually running on worn rollers or a track that’s drifted out of level. We shim, reset, or replace the track and install new sealed rollers so the gate rides smooth. This is a same-day fix in most cases.
Motor and Drive Repair
The gate motor (the box that slides or swings your gate automatically) on a Crowley slide gate is typically a Linear, Viking, or DoorKing. If yours has failed, you can learn more about our Gate Motor Repair in Crowley. When the motor hums but the gate doesn’t move, the drive gear or capacitor has failed. We carry common parts for these brands on the truck, which means fewer return trips for you.
Trusted Brands We Service in Crowley
We’re factory-trained on the brands most often installed across Crowley’s HOA subdivisions: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. No matter which one sits on your gate, we can diagnose it accurately. Our technicians carry common parts for Linear and DoorKing slide operators, along with Ghost Controls and LiftMaster swing arms, so most repairs in Crowley are completed in one visit, not two.
Common Gate Repair Problems We See in Crowley Homes
These are the calls we get most from Crowley homeowners, in order, week after week. If one sounds familiar, call us at (828) 426-7081 before it strands your car on the wrong side of the gate.
- Swing gate won’t latch by July. Expansive clay heaves the hinge post out of plumb every summer. The gate sags, the latch misses, and the opener throws an error. We pull the post, set it deeper with a concrete bell, and realign the operator bracket.
- The operator hums but the gate won’t move. Most often a failed capacitor, stripped drive gear, or seized motor on an operator that’s 10 to 15 years old. We diagnose the specific brand, often Ghost Controls or LiftMaster, and replace only what failed.
- Slide gate jumped its track. Track sections shift as the slab or soil moves, typically after heavy rain or freeze-thaw. We reset and anchor the track, then adjust limit switches so the gate doesn’t over-travel.
- Weld snapped after a storm. Spring high-wind thunderstorms and ice-load events bend or break gate frames, especially on older ornamental iron. We straighten, re-weld, and paint before rust gets a foothold.
Pricing for Gate Repair in Crowley, TX
Here are honest starting ranges for the repairs we do most in Crowley. Every quote comes to you in writing, before any work begins, and the price we quote is the price you pay.
- Iron gate realignment and hinge repair: $220 – $520
- Sliding gate track and roller repair: $190 – $460
- Gate motor capacitor or drive gear replacement: $180 – $390
- Weld repair, per joint: $90 – $180
- Full operator replacement (parts and labor): $650 – $1,400 depending on brand and arm style
Crowley’s clay soil and subdivision housing stock push many jobs toward the higher end of these ranges, because the post footing often needs rework, not just the hardware bolted to it. We’ll walk through the options with you, including when retrofitting an old operator costs more than replacing it. Call (828) 426-7081 for an exact quote on your gate.
We Also Serve Cities Near Crowley
Our technicians work throughout Crowley and the surrounding Tarrant County communities. If your gate is in Burleson, Joshua, Kennedale, or Arlington, the same team, the same written pricing, and the same 365-Day Done Right Promise apply. When you search for Gate Repair in Crowley, you’ll find us ready to help wherever your street is.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Crowley
The Blackland Prairie clay under Crowley swells in spring and shrinks hard in summer drought. That cycle heaves your hinge post out of plumb, dropping the gate’s latch side. The gate still moves, but it can’t seat into the latch, so the opener reports an obstruction and reverses. The fix is resetting the post, not replacing the operator. Call (828) 426-7081 and we’ll confirm it on site with a free estimate.
Yes, in most cases. Many 15-year-old LiftMaster operators in Crowley subdivisions pre-date current UL 325 entrapment protection requirements, but retrofit kits can add photo-eye sensors and updated control boards. We’ll inspect your operator and tell you if retrofitting is cheaper than full replacement before quoting anything.
Almost always repairable. A slide gate jumps its track when the track shifts from soil movement or a roller carriage fails. We reset the track, replace the worn rollers, and adjust the operator limits. Replacing the whole gate is rarely necessary for this issue. Call (828) 426-7081 for a same-day assessment.
Yes, and it’s the single biggest recurring issue we see. Posts set without a concrete bell below the clay’s shrink-swell zone lean toward the street by midsummer. That shifts the hinges, the latch, and the operator bracket. Proper resetting digs deeper than the original install and pours a bell footing, which stops the cycle for good.
If your gate operator reverses when it hits resistance and has photo-eye sensors across the opening, it likely meets UL 325. Older operators installed before 2000 often lack these features. We can test your system and, if it doesn’t comply, show you retrofit options with a written price before any work starts.
Call Warden Gate Repair in Crowley
When your gate is down, you want it fixed right and you want to know who’s coming to your door. We send a name and a photo before our tech arrives. We give you a written price before the work starts. And if the repair fails within a year, we come back free. That’s the deal, every time, in Crowley. Call (828) 426-7081 now for a free estimate, or to talk through what’s happening with your gate.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Crowley, TX.