Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haslet
Gate repair in Haslet usually costs between $185 and $900 depending on what failed, and most residential calls are done the same day or next. If your gate won’t open, sags, or the motor is grinding, call Warden Gate Repair at (828) 426-7081 and we’ll have a background-checked, identity-verified tech named and pictured before they ever pull up to your house. We know the Alliance Corridor’s industrial gates and the HOA entries in Northstar, Sendera Ranch, and Caraway just as well as a single driveway gate off FM 156 or Blue Mound Road.
Why Warden Gate Repair Is Haslet’s Preferred Gate Repair Company
Haslet sits in a strange spot for gate work. The Blackland Prairie clay under this part of Tarrant County swells in wet springs and shrinks in dry summers, which is why hinge posts lean, swing gates drag, and operators burn out early. Our techs have pulled and re-set more leaning posts in Haslet than in most nearby cities combined, because the soil here doesn’t settle the way it does in Keller or Roanoke.
Homeowners in Haslet call us for a specific reason: we tell you the price in writing before any work starts, and the tech who shows up is the same person whose name and photo you already have. Cole Rafferty, who runs our gate repair operation, built this standard into every job. No anonymous van. No vague estimate. No surprise line items at the end.
We’re part of the Threshold Group family, and every tech who steps onto your property in Haslet has passed the Threshold Standard: background-checked, identity-verified, photo-badged, and sent to you by name before arrival. That matters in a town where a gate is often the only thing between your family and the street.
Wood Gate Repair in Haslet
Wood Gate Repair in Haslet most often means fixing a sagging or split gate frame, replacing rotted stiles, re-hanging a heavy panel, or repairing the hinge side of a driveway gate that has pulled away from the post. In this part of Tarrant County, the real culprit is usually the clay soil: wet springs push the post out of plumb, and an un-hung wood gate gets heavier as it absorbs humidity. A typical wood gate repair in Haslet runs $185 to $475, depending on whether we’re re-mounting hardware, splicing rotted sections, or rebuilding the panel.
Structural Repair and Re-Hanging
When a wood gate drags on the latch side, the fix is rarely just tightening bolts. Haslet’s clay expansion shifts posts seasonally, so we pull the panel, correct the post alignment where needed, and re-hang with heavy-duty hinges and lag hardware that hold the gate’s true weight. If the post itself is rotted or set in a shallow footing, we’ll set a new post in concrete and re-hang the same day in most cases.
Rotted Wood and Weather Damage
Haslet gets hard freezes, and ice storms are more common this far north in Tarrant County than in Fort Worth proper. Freeze-thaw cycles split wood gates at joints and let water into the end grain. We replace rotted stiles and bottom rails, seal the new wood, and re-tune the hinges so the gate swings cleanly instead of scraping the ground.
Driveway Gate Repair in Haslet
Driveway Gate Repair in Haslet covers automated slide and swing gates, manual farm-style gates on acreage off Cleveland-Gibbs Road, and the ornamental iron and aluminum driveway gates common in Sendera Ranch and Northstar. The work typically involves fixing or replacing the gate motor (the box that slides or swings your gate automatically), re-aligning the track, repairing broken hinges or weld points, and re-setting the safety sensors. Driveway gate repair in Haslet runs $220 to $900 depending on the operator, the access, and whether we’re also correcting a leaning post.
Automatic Opener Repair and Reprogramming
When a driveway gate operator in Haslet hums but won’t move, or opens partway and reverses, the problem is usually the travel limits, the safety photocells, or a stripped gear inside the motor. We repair and reprogram LiftMaster, Linear, Ghost Controls, and Viking operators on-site, and we carry the common boards and arms for those brands in our service vehicles so a Haslet driveway isn’t left stuck open overnight.
Track, Roller, and Post Alignment
A slide gate that binds halfway across the driveway is almost always a track or roller problem, and in Haslet the clay soil is the hidden cause. We re-level low sections of track, replace worn rollers, and re-set gate posts that have heaved out of position. A driveway gate that fights its own track will eat motors; fixing the alignment first is cheaper than replacing an operator twice.
Trusted Brands We Service in Haslet
Warden Gate Repair is factory-trained on nine major gate and opener brands, and in Haslet we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock the most common Linear and Ghost Controls boards, Viking arms, and DoorKing loop-detector parts on our trucks, which means a Haslet repair often gets finished the same visit instead of waiting on a shipped part. If your HOA’s entry gate runs a brand we service, we have the right parts and the right knowledge in the same truck.
Common Gate Repair Problems We See in Haslet Homes
- Leaning hinge posts in Blackland Prairie clay. Haslet’s soil expands aggressively in wet springs and shrinks in summer droughts, cyclically rotating and tilting gate posts. A half-inch post shift at the base becomes a two-inch sag at the latch end of a swing gate.
- Builder-grade operators failing together. Most of Haslet’s subdivisions were built in the 2010s and early 2020s with mid-grade automated operators that are now aging out of warranty at the same time. We’re seeing whole neighborhoods where the original entry gates and driveway openers are failing within a few years of each other.
- Ice-storm damage to keypads, sensors, and finish. Hard freezes north of Loop 820 glaze gate operators and keypad entries with a layer of ice that strains motors on cold-morning cycles and trips the safety photocells. The freeze-thaw also fractures powder-coat on ornamental iron gates.
- Loop detector failures at truck-entry gates. On industrial properties along the Alliance Gateway, the loop detectors embedded in asphalt aprons fail at unusually high rates because constant heavy-axle traffic degrades the detector wire insulation. Loop replacement and re-tuning is one of the most common commercial calls unique to the Haslet corridor.
Pricing for Gate Repair in Haslet, TX
Here are honest Haslet price ranges, not vague starting points. Minor hinge and latch repairs run $185 to $325. Re-aligning a swing gate and correcting a leaning post: $300 to $600. Replacing a mid-grade residential gate motor or control board: $350 to $800. Full post pull and re-set in concrete, including new hinges and operator re-tuning: $550 to $900. Commercial slide-gate work at Alliance Gateway properties is quoted per site after a loop-detector and track inspection. Every job gets a written price before any work starts, and the estimate is free. Call (828) 426-7081 and describe what your gate is doing; we’ll give you a real number, not a hedge.
We Also Serve Cities Near Haslet
Our Gate Repair team works throughout the Alliance Corridor and northern Tarrant County. If you’re in Keller, Roanoke, Newark, or North Richland Hills, we cover those communities too, from a driveway gate in a Keller HOA to an industrial slide gate in Roanoke. Learn more about our full service area on the Haslet page, or call and we’ll tell you when we can be there.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haslet
Because the panel usually isn’t the root problem. In Haslet, the soil under the hinge post is the root problem. Blackland Prairie clay swells when it’s wet and shrinks when it’s dry, which rotates the post out of plumb and drags the whole gate panel down with it. If you weld or brace the panel without correcting the post footing, the same sag returns within a season or two. That’s why our written price often includes pulling and re-setting the post in concrete, not just welding the panel. Call (828) 426-7081 and we’ll explain what your specific gate actually needs.
Yes, and for good reason. Most Haslet HOAs have architectural review language covering gate style, height, finish color, and sometimes even the operator model at a shared entry. A repair that changes the gate’s appearance or swaps in a different motor type often needs board or management-company sign-off before the work. We’ve coordinated directly with Haslet HOA boards and property managers: we document the existing gate, submit the repair scope and finish details, and hold the work until the architectural approval is in hand. If your management company needs a written scope for their punch list, we build it, and the project usually clears faster because the detail is already there.
Because the asphalt aprons at Alliance Gateway truck entries carry constant semi-truck and heavy-axle traffic, and that load degrades the detector wire insulation embedded in the concrete/asphalt faster than any residential install. The loop detector is what tells the gate a truck is waiting, and when the loop wire breaks down, the gate either won’t open on approach or closes on a truck that’s still in the path. Our Haslet techs carry replacement loop wire and detectors, and on Alliance Gateway properties we re-tune the loop sensitivity for the specific truck traffic pattern before we leave.
You should not defer it. A gate that won’t reverse on obstruction is a direct UL 325 safety failure, which is the federal standard for automated gate safety. A gate that can’t sense a child, a pet, or a car in its path can cause serious injury, and in Haslet’s climate, ice and clay movement make sensors go out of adjustment more often than people expect. Warden Gate Repair will diagnose the sensor or photocell issue and give you a written price for the repair. If your gate is usable without the auto-reverse function, it is not safe to run as automatic. Call (828) 426-7081 today and we’ll get a tech out to make it right.
They already do. Ice storms this far north in Tarrant County coat gate operators, hinges, and keypad entries with a hard glaze. The added ice weight strains the motor on cold-morning cycles, and freeze-thaw fractures the powder-coat finish on ornamental iron gates over time. Keypads and safety photocells can also trip or fail when ice covers the lens. The best prevention is a mid-winter inspection that re-tunes the operator travel, checks the keypad seal, and catches small finish damage before rust gets a foothold. We do those inspections in Haslet every winter, and the written report tells you what’s urgent and what can wait.
Call Warden Gate Repair for Gate Repair in Haslet
If your HOA entry gate is sagging, your driveway gate won’t reverse, or an Alliance Gateway truck gate is down, call Warden Gate Repair at (828) 426-7081. We’ll send a named, photo-badged tech with a written price before the work starts. That’s the 365-Day Done Right Promise: if the repair fails within a year, the return visit is free. Haslet’s clay soil and ice storms are hard on gates. We’ve fixed enough of them here to know exactly what to look for.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Haslet, TX.