Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hurst
A sagging gate on a Hurst property is rarely just a hinge problem. It’s usually the Blackland clay underneath heaving and settling, loosening posts that were set too shallow back in the 1960s and 70s. Our Gate Repair team handles this every week in Hurst, from Pipeline Road to Precinct Line Road, and we quote the real fix before any work begins. Call (828) 426-7081 and you’ll get a live person, a clear diagnosis, and a written price. No gate in Hurst has to keep dragging across a driveway.
Why Warden Gate Repair Is Hurst’s Preferred Gate Repair Company
Hurst homeowners call us because we tell them the truth about what’s under the gate. Most companies adjust hinges and call it done. We know the original 4×4 posts in Hurst’s mid-century neighborhoods were set in shallow concrete collars sized for stable soil, not for Tarrant County’s expansive clay. That means a gate that sags again six months after a hinge adjustment isn’t a mystery to us. We see the pattern.
Our techs live and work in the DFW corridor, and they know Hurst’s housing stock: ranch-style layouts from the 1960s through 1980s, rear alley access, and steel or wood swing gates that are now 40 to 60 years old. Each technician arrives with a name and photo sent ahead of the visit, along with a photo ID badge shown at the door. That’s the Threshold Standard, and it’s enforced on every job we do in Hurst. Cole Rafferty built Warden Gate Repair on a simple idea: a warden watches over a place and keeps it secure. That’s the standard for every gate we touch.
The 365-Day Done Right Promise backs every repair. If our fix isn’t right, we return free and make it right. In writing, every time.
Sliding Gate Repair in Hurst
Sliding gate repair in Hurst comes down to two things: the track and the operator. Most sliding gates here sit on concrete driveways over soil that moves, which means the track shifts out of level and the gate starts grinding, stalling, or eating wheels. Add a 40-year-old DoorKing or Viking operator with an original control board, and you have a gate that fails unpredictably. A typical sliding gate repair in Hurst runs $225 to $475 for track realignment, wheel replacement, and limit switch adjustment. If the operator motor or control board has failed, expect $400 to $900 installed, depending on the brand and what’s still salvageable.
Track, Wheels, and Leveling
When the ground under a Hurst driveway heaves, the track bows and the carrier wheels bind. We remove the gate, reset the track to level, and replace worn bearings. On older installations, we may pour a small, deeper footing under the track’s mid-span to stop the same movement from returning every spring.
Operator and Control Board Repair
Obsolete control boards are common in Hurst’s older homes. We stock replacement boards for Viking, Ghost Controls, Linear, and DoorKing, so a dead board doesn’t mean a week without a working gate. If the operator itself is beyond economical repair, we’ll quote the retrofit honestly rather than patching a motor that won’t survive one more Texas summer.
Wrought Iron Gate Repair in Hurst
Wrought iron gate repair in Hurst usually means two jobs at once: fixing what rust and hail have damaged, and fixing what the soil has moved. Hurst sees spring hailstorms nearly every year, and those storms dent and warp aluminum and thin steel panels. Meanwhile, the clay underneath has been tilting the posts. A straight wrought iron repair, including welding a cracked joint or replacing a rusted bottom rail, runs $180 to $400. If we need to reset the post in a deeper, wider footing first, expect $350 to $700 all-in, because the collar from 1972 isn’t doing its job anymore.
Weld, Rust, and Hail Damage
We weld cracks, cut out rusted sections, and replace bent pickets that look like they’ve been through a dozen Hurst hailstorms because they have. After the metal is sound, we prime and paint to match as closely as a 50-year-old finish allows.
Post Reset and Frame Realignment
On Hurst’s ranch-style properties, the hinge post is usually the failure point. A wrought iron gate is heavy, and a 4×4 post set shallow in moving clay will eventually lean. We pull the post, break out the old collar, and set it deeper with a wider footing before touching the hinges. Without that step, the gate will sag again within a year.
Trusted Brands We Service in Hurst
If your Hurst gate already has an operator, we likely service the brand. We’re factory-trained on nine lines, including Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, remotes, and safety parts in local stock for Hurst customers, which means less waiting on a FedEx box and more same-week repairs. Whether the gate swings or slides, we match the part to the gate, not the part to what’s left in the truck.
Common Gate Repair Problems We See in Hurst Homes
- Post lean and gate sag. The original 4×4 hinge posts on 1960s-80s homes were set in shallow collars built for stable soil, not Blackland clay. They pump loose with every dry-wet cycle, and the gate drops even when hinges look fine.
- Rear alley gate wear. Hurst’s ranch-era subdivisions were built with alley access. Back-alley swing gates face daily use, and after four decades that means cracked welds, rusted hinges, and latches that no longer catch.
- Obsolete operators without safety eyes. Many older Hurst installations still run legacy boards with no working photo-eyes or edge sensors. That fails UL 325 entrapment protection and can’t be patched forever.
- Hail and heat damage. Spring hail dents panels; summer heat accelerates rust on thin steel. These two forces together age a Hurst gate faster than the same gate would age 30 miles west in sandier, cooler ground.
Pricing for Gate Repair in Hurst, TX
Gate repair in Hurst, TX runs from about $180 for a simple hinge or latch fix to $900 and up for operator replacement on an older sliding gate. The middle range, where most jobs land, is $250 to $500. That covers post resetting, realignment, weld repair, and most part replacements. The single biggest cost driver in Hurst is the post footing, because fixing a gate properly here often starts below grade, not at the hinge. Every price is written and agreed before work starts, so the number we quote is the number you pay. Call (828) 426-7081 for a free estimate.
We Also Serve Cities Near Hurst
Our crews handle Hurst and the surrounding area daily. If you’re in North Richland Hills, Bedford, Colleyville, or Haltom City, the same technician standards and written pricing apply. Call and we’ll get you scheduled.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hurst
The hinge post has moved. Hurst’s Blackland clay shrinks in 100°F heat and heaves when rain returns, and that cycle slowly pumps shallow-set posts loose in their collars. The gate looks like it dropped at the latch, but the real problem is underground. The fix is to reset the post deeper before adjusting anything else. Call (828) 426-7081 and we’ll tell you if your post is the culprit.
It depends on the board and the safety system. If the motor is sound and we can install a new control board plus photo-eyes that meet UL 325, a retrofit runs $300 to $600 and saves the cost of a full operator. If the board is obsolete, the wiring is brittle, and the motor is 25 years old, replacement usually runs $500 to $900 and is the cheaper long-term answer. We quote both options in writing before you choose.
Yes. Alley gates in Hurst get used dozens of times a day, so we inspect the hinges, latch, and post footings more aggressively than we would for a decorative front gate. High-use gates need heavier hardware, and we quote accordingly. The written price you get covers the hardware that will actually hold up under daily use.
They do. Sliding gates fail at the track, the carrier wheels, and the operator drive, because the concrete driveway shifts with the soil underneath. Swing gates fail at the hinge post and latch. We diagnose both types weekly in Hurst and stock parts for each. Call (828) 426-7081 for a free estimate.
We service Linear, Viking, Ghost Controls, and DoorKing, among nine major brands we’re factory-trained on. If your operator isn’t one of those, describe it over the phone and we’ll let you know before we schedule the visit. You’ll always get a written price before any work begins.
Call Warden Gate Repair in Hurst
If your gate is sagging, grinding, or dead, call (828) 426-7081. We’ll answer live, ask the right questions, and get a technician scheduled for Hurst. You’ll know the tech’s name and face before they arrive, and you’ll have a written price before any work starts. That’s how we’ve done it since 2008, and that’s how Cole Rafferty runs every job in Hurst.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Hurst, TX with gate repair and operator service.