Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Schertz, TX
Gate repair in Schertz almost always means one thing: an ornamental iron driveway gate on a 2000s-era HOA home, with an operator that’s now 10 to 18 years old and starting to fail. The black clay soil under most of Schertz heaves with every wet-dry cycle, throwing posts out of plumb and binding swing gates. We’re Warden Gate Repair, and we work on those gates every week. If your gate won’t open, sags, or makes a grinding noise when the motor kicks in, call us at (828) 426-7081 and we’ll send a technician you’ll know by name and photo before they arrive.
Why Schertz Homes Are Different
Schertz grew fast. The master-planned subdivisions that went in along FM 3009 and the IH-35 corridor from the mid-2000s through the 2010s, places like Savannah and the neighborhoods branching off Roy Richard Drive, came with builder-upgrade driveway gates as standard features in many sections. Those gates are ornamental wrought iron or tubular steel, and they were installed with automated operators all within a narrow window of years. Now they’re aging together.
That clustering matters. When a LiftMaster or Linear board from the 2008 – 2013 generation dies on one street, the same failure often shows up three doors down within a month. We stock the replacement boards for those specific generations, which means we can close calls in Schertz the same day that other companies are quoting a week out. The other thing that sets Schertz apart is HOA reality. Most subdivisions here have architectural review committees, and changing a gate’s look, its operator arm style, or even its color can require written approval. We work around those requirements on nearly every job in this city, and we’ll tell you honestly if your repair can be done as a like-for-like replacement or if it’s going to need a submittal. That conversation saves homeowners from a violation letter later.
Our Main Schertz Services
Schertz homeowners call us for two situations most often: a gate that has stopped moving entirely, and a gate that moves but badly, with grinding, jerking, or reversed travel. Each of our three service lines has its own detailed Schertz page below.
Gate Repair in Schertz
Most Schertz gate repairs fall into a few predictable categories: sagging gates pulling hinge welds, posts leaning from clay-soil movement, and latch or track hardware that’s worn past adjustment. The soil here is the wildcard. When a post moves, the gate’s weight shifts onto the hinges and the operator, and every cycle accelerates the damage. We inspect the full swing path, not just the symptom, because a gate that’s binding at the post today will burn out a new motor within months. Full details on what we fix and how we price it are on the Gate Repair in Schertz page.
Electric Gate Repair in Schertz
Electric gates in Schertz live hard. Summer heat along the IH-35 corridor pushes past 100°F routinely, and that heat bakes circuit boards inside the operator housing. Photocells get dusty, keypads crack, and ground loops corrode in the alkaline clay. When an electric gate fails, it’s rarely the whole system, it’s one component. Our techs bench-test boards rather than guessing, and we carry the common LiftMaster and Linear control boards for the FM 3009-era installs. See Electric Gate Repair in Schertz for the full breakdown of what we diagnose and replace.
Gate Motor Repair in Schertz
The gate motor, the box that slides or swings your gate automatically, is the component Schertz homeowners least expect to fail early. But the original operators installed as builder upgrades around 2008 – 2013 are reaching end-of-life in clusters, and a motor that grinds for a few extra seconds before stopping is often the first warning. We repair and replace motors from Viking, DoorKing, Ghost Controls, and Elite, and we match the existing mounting pattern where possible so the replacement doesn’t require new concrete work. The Gate Motor Repair in Schertz page covers motor failure signs, replacement options, and what a like-for-like swap costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Schertz
We carry parts for the brands Schertz installers actually used: Viking, Ghost Controls, DoorKing, and Elite, along with the LiftMaster and Linear generations that dominate the FM 3009 subdivisions. Because we stock locally for these Schertz-era installs, turnaround is usually same week rather than two weeks of waiting on a shipped board. See our brands for the full list of nine manufacturers we’re factory-trained on.
Pricing for Gate Company in Schertz, TX
| Service | Typical range in Schertz |
|---|---|
| Gate off track or binding | $150 – $300 |
| Hinge or weld repair | $125 – $250 |
| Post reset or reinforcement | $200 – $500 |
| Gate opener board replacement | $250 – $600 |
| Operator arm replacement | $200 – $450 |
| Full operator replacement | $600 – $1,400 |
| Keypad or receiver replacement | $140 – $350 |
| Photocell or safety edge replacement | $120 – $280 |
Two things push Schertz pricing higher than a flat-rate chart suggests: HOA-driven constraints and soil movement. If your association requires a specific finish or a matching operator model, the parts cost rises and approval adds a few days. Post work is also more involved here because resetting a post in expansive clay often means deeper concrete and additional reinforcement to keep it plumb through the next wet season. Whatever the job, you get a written price before any work starts, every time, with no surprise line items.
Neighborhoods We Serve in Schertz
We work across Schertz from the IH-35 corridor to the neighborhoods east of FM 3009. Our typical response window in Schertz is same day or next morning, depending on the call volume that day and whether the part is already on the truck.
- Savannah
- Carolina Crossing
- Meadow Park
- The Crossvine
- Ashley Place
Service Area – Cities Near Schertz
Our service area covers Schertz and the surrounding communities along the IH-35 northeast corridor. We also work regularly in Universal City, TX, Cibolo, TX, Converse, TX, and New Braunfels, TX. Dispatch and scheduling for Schertz jobs is coordinated from our San Antonio office, but the crews working your gate are local to this side of the metro.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Schertz
Most Schertz calls get a same-day or next-morning visit, depending on when you call and whether the likely part is already stocked on the truck. Summer months are busiest because heat stress pushes more operators into failure. Call (828) 426-7081 and we’ll give you a straight answer on timing, not a vague window.
Like-for-like repairs, same hinge style, same operator model, same color, usually don’t require HOA submittal in most Schertz subdivisions. If your association’s ARC rules require approval for any change, we’ll flag it before you’re surprised by a violation letter. We handle the repair either way; we just want you to know which path applies on your street.
We cover all of Schertz, from the IH-35 corridor neighborhoods through the FM 3009 subdivisions and east toward the county line. If you’re within Schertz city limits or its immediate fringe, we’ll come out. For an exact quote on your gate, call (828) 426-7081 and describe what it’s doing, or not doing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Schertz Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.