Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
A dead gate operator on a Keller acreage entrance usually isn’t a motor failure. It’s a hinge post that moved two or three inches in the Blackland Prairie clay and bound the arm past its torque limit. Most gate repair calls in Keller take our techs one visit, with a written price handed over before the first tool comes off the truck. Call (828) 426-7081 and you’ll get a live person, a straight answer, and a scheduled visit from a named, photo-badged technician.
Warden Gate Repair works exclusively on gates and gate openers. We’re not a handyman service that also does gates. We’re the crew that Keller homeowners call when a wrought-iron driveway gate from a 1990s custom build has sagged off its hinges, or when a solar opener on a pipe-and-board farm gate near the eastern edge of town has stopped holding charge. We know this city’s soil, its housing stock, and the operators installed on its gates because that’s all we work on.
Why Warden Gate Repair Is Keller’s Preferred Gate Repair Company
Keller homeowners tend to ask the same two questions before anyone gets near their property: who is coming, and what will it cost. We answer both before the visit. Every technician is background-checked, identity-verified, and photo-badged under the Threshold Standard, and we send the name and photo to your phone before arrival. When the doorbell rings, you know exactly who is standing on the other side of it.
The written price works the same way. We diagnose, we hand you a number, and that number does not move unless you approve additional work in writing. No surprise line items. And every repair carries the 365-Day Done Right Promise: if the fix fails within a year, the return visit is free. Cole Rafferty, who leads the team, built the company around that promise in 2008, and it applies to every single job in Keller.
Dispatch for Keller runs through our Dallas-Fort Worth office, which means we can usually have a tech to a Keller address the same day when it’s urgent. Live phone coverage runs 24/7, not a voicemail tree. If your gate is stuck open at 2 a.m. and you’re home alone, a real person answers and starts the process right then.
Wrought Iron Gate Repair in Keller
Wrought iron gate repair in Keller typically means one of three things: a hinge that’s pulled out of a post, a frame that’s racked out of square from soil movement, or a weld that’s cracked at a stress point. A typical hinge and realignment job runs $180 – $340. Weld repairs on ornamental iron run $150 – $400 depending on the number of cracked joints and whether we need to reinforce the frame. These are common on Keller’s 1990s and 2000s brick-and-stone custom homes, where the original gates are now 20 – 30 years old and have been through dozens of wet-dry cycles on expansive clay.
Hinge and Post Re-Setting on Clay
When a wrought-iron gate drags at the latch side or the top corner pulls away from the post, the problem is almost always the post, not the gate. Keller’s soil heaves hard after spring rain and contracts hard in summer drought. We reset posts at depth in compacted clay, sometimes with a wider footing, and then re-hang the gate so it swings true.
Weld and Rust Repair
Ornamental iron on Keller gates often rusts at the bottom rail where sprinkler overspray hits it, and at weld joints where the original powder coat has chipped. We grind, reweld, and seal those joints. The goal is to stop the failure before it spreads, not just to make it look patched.
Metal Gate Repair in Keller
Metal gate repair in Keller covers tubular steel driveway gates, ranch-style pipe gates on the rural edges, and the occasional aluminum frame that has warped in a Texas summer. A typical tubular steel gate realignment runs $150 – $300. A full frame re-square with new hinges runs $250 – $500. If the gate is aluminum and the frame has twisted past the point of shimming, we’ll tell you honestly and quote a replacement rather than charging you to chase a lost cause.
Slide Gate Roller and Track Work
Slide gates on Keller acreage properties take a beating from heat and dust. Grease in the roller bearings cooks out above 100°F, and the rack and pinion starts skipping. We replace rollers, re-lubricate with high-temp grease, and reset the track so the gate runs without grinding.
Operator Realignment on Heavy Gates
A LiftMaster or FAAC operator straining against a gate that’s shifted out of plumb will trip its torque limit and shut down. We see this pattern constantly in July, after the spring clay movement has done its work. The fix is usually re-setting the gate, not replacing the operator, and we’ll tell you which one you actually need before we quote it.
Trusted Brands We Service in Keller
We’re factory-trained on nine major gate and opener brands, and we stock common parts for the ones Keller homeowners see most. LiftMaster and Linear operators are everywhere in Keller’s 1990s – 2010s subdivisions. FAAC and BFT show up on higher-end ornamental iron driveway gates and some commercial entrances. Viking and Ghost Controls are common on rural-edge solar setups where running mains power to a gate 400 feet from the house isn’t practical. Having the right parts on the truck means most Keller repairs finish the same day they start.
Common Gate Repair Problems We See in Keller Homes
- Hinge-post heave on Blackland Prairie clay. The soil under Keller expands and contracts dramatically through wet and dry cycles, shifting posts two to three inches in a season. The gate racks, the operator binds, and the system faults out.
- Summer heat cooking slide-gate rollers. Keller regularly tops 100°F in July and August. The grease in roller bearings breaks down, the rack skips, and cheaper aluminum frames warp enough to throw the track alignment off.
- Freeze-damaged actuators from hard winters. The 2021 Uri event cracked hydraulic seals and seized swing gate actuators across Keller’s rural-edge properties. Gates that sat through that week still show up with split seals and stiff operation.
- Solar panel sizing on long driveway entrances. Keller’s larger lots and ranch-style parcels often have gates 300 to 500 feet from the nearest power source. Undersized solar panels and weak batteries die, and the gate stops responding.
Pricing for Gate Repair in Keller, TX
Keller gate repair pricing holds to honest, narrow ranges. Hinge and post re-setting runs $180 – $340. Wrought-iron weld repairs run $150 – $400. A full tubular steel gate realignment runs $250 – $500. Operator troubleshooting and repair runs $120 – $350 for most residential units, with full operator replacement starting around $600 installed, depending on the brand and whether solar or mains power is involved. The number we write down before work starts is the number on your invoice. Every time. A free estimate is one phone call away at (828) 426-7081.
We Also Serve Cities Near Keller
Warden’s Gate Repair team covers Keller plus the neighboring communities of Haslet, North Richland Hills, Roanoke, and Southlake. Same standards, same written pricing, same named technician at your door. If you’re in one of those cities and searching for Gate Repair in Keller because that’s where the problem started, we’ll still send someone your way.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
It’s usually the post. Keller’s Blackland Prairie clay heaves after spring rain and contracts in summer heat, pushing gate posts two to three inches out of plumb. That binds the operator arm past its torque limit and the system faults out, which looks exactly like a dead motor. Our techs check post plumb with a rotary laser level before touching the electronics. Call (828) 426-7081 and we’ll diagnose it properly.
Not necessarily. If your gate sits hundreds of feet from the nearest panel, a properly sized solar gate opener with adequate battery storage handles Keller’s sun load well. We size solar systems based on gate weight, cycle frequency, and shade, and we’ll quote the full setup in writing before you commit.
The heat expands the metal and the clay beneath the track has likely shifted. North Texas summers over 100°F warp lighter frames and cook the grease out of slide-gate rollers, so the rack skips. We reset the track, replace the rollers with high-temp units, and square the gate so it runs clean through the hot months.
Yes. Automated gate operators in Texas must have functioning entrapment protection: photoelectric sensors, reversing edges, or both, depending on the installation. If your system was installed decades ago or has been bypassed, we’ll bring it up to current safety standards as part of the repair quote.
Yes, and this is one of the most common calls we run in Keller. Those original gates are 20 to 30 years old now, with fatigued hinges, cracked welds, and operators that were never designed for the clay movement they’ve endured. We repair the steel, reset the posts, and either restore or replace the operator depending on what the gate actually needs. Get an exact quote by calling (828) 426-7081.
Call Warden Gate Repair for Your Keller Gate
If your gate is stuck, leaning, grinding, or just stopped responding, call (828) 426-7081. You’ll reach a live person who can schedule a visit from a named, photo-badged technician, and you’ll get a written price before any work begins. That’s the whole deal: know who is coming, know what it costs, and get it fixed right, backed by the 365-Day Done Right Promise. We serve all of Keller, from the large-lot homes near Bear Creek Park to the acreage parcels off Keller-Hicks Road and the rural east side.
Written by Cole Rafferty, Owner at Warden Gate Repair, part of the Threshold Group family and serving Keller, TX.