Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mission Bend, TX
Finding a gate company in Mission Bend means finding someone who understands what Harvey did to this area and what the gumbo clay has been doing ever since. We’re Warden Gate Repair, and we specialize in one thing: gates, their motors, and the wiring that runs them. If your gate won’t open, hangs crooked, or stopped responding to the remote, call us at (828) 426-7081 and you’ll get a real person on the line, a written price before any work starts, and a technician whose name and photo you’ll have before they knock.
Why Mission Bend Homes Are Different
Mission Bend sits right against the Barker Reservoir flood pool, and during Hurricane Harvey in 2017, large sections of its subdivisions sat underwater for days. That event still shapes gate work here. Any gate or electric opener that was submerged is now years into an accelerated corrosion cycle: warped frames, rusted hinges, and circuit boards that fail without warning. We regularly open a control box in Mission Bend and find the logic board pitted and green, even on a gate that never touched floodwater directly. Moisture wicks up through conduit runs near the drainage corridors and destroys electronics from the inside.
Beyond the flood history, the housing stock itself plays a role. Mission Bend was developed mostly from the late 1970s through the 1990s, which means a high concentration of ornamental wrought-iron driveway and side-yard gates. Many of these still carry their original electric operators, now 25 to 45 years old. HOAs in the area restrict replacement styles and colors, so when an original operator dies, homeowners often need a repair that preserves the existing gate rather than a swap to something new. Add in the expansive Houston-area clay that heaves and shrinks with every wet-dry cycle, and you get posts out of plumb, latch strike plates that miss, and gates that bind at the hinge. Salt-laden Gulf air pushes humidity well past 90% in summer, so hardware rusts fast and hinges seize seasonally.
Our Main Mission Bend Services
The two calls we get most in Mission Bend are for gates that won’t move and motors that have quietly quit. Below are the three ways we handle those jobs, each with its own dedicated page for Mission Bend specifics.
Gate Repair in Mission Bend
A sagging or stuck gate in Mission Bend usually traces back to the soil under the posts or to hardware that’s been fighting Gulf humidity for decades. We re-set posts, re-weld broken pickets, replace seized hinges, and correct the latch alignment so the gate closes like it should. HOA standards often mean keeping the original design intact rather than replacing it, and our team works within those constraints daily. For the full breakdown of what gate repair involves here, see Gate Repair in Mission Bend.
Electric Gate Repair in Mission Bend
Electric gates in Mission Bend face a specific enemy: moisture that finds its way into control housings, even on systems far from the flood pool. We diagnose wiring faults, replace corroded circuit boards, repair safety sensors and keypads, and restore power to systems that have gone dark. Because much of the equipment here is decades old, we carry parts for the brands most common in this area and can usually complete an electric repair in a single visit. Details are on our Electric Gate Repair in Mission Bend page.
Gate Motor Repair in Mission Bend
The motor, or operator, is the box that slides or swings your gate automatically. In Mission Bend, we frequently find that slide-gate operators mounted near the Barker Reservoir drainage corridors show corrosion inside the control board housing even without direct flood exposure. That persistent ground moisture is a failure mode we see here far more often than even two miles east toward Highway 6. We repair and replace operators, matching the motor to the weight and travel of your specific gate. See Gate Motor Repair in Mission Bend for a full walk-through.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mission Bend
We service linear-arm and slide operators from Linear and Viking, swing-arm and solar kits from Ghost Controls, and commercial-grade operators from DoorKing. Our trucks carry common boards, remotes, and safety parts for these brands, which lets us finish most Mission Bend jobs in a single trip. You can see the full list on our brands page.
Pricing for Gate Company in Mission Bend, TX
| Service | Typical range in Mission Bend |
|---|---|
| Gate repair (general) | $150 – $380 |
| Electric gate repair | $190 – $450 |
| Gate motor repair | $220 – $500 |
| Control board replacement | $250 – $600 |
| Hinge replacement | $120 – $400 |
| Post re-setting | $200 – $500 |
| Remote/keypad programming | $85 – $180 |
| Safety sensor replacement | $120 – $280 |
Prices in Mission Bend push toward the higher end of these ranges when flood-related corrosion has spread through the wiring or when a heavily rusted post needs to be dug out and re-set in shifting clay. Whatever the job, you’ll have a written price in hand before any work begins, so there are no surprise line items when we’re done.
Neighborhoods We Serve in Mission Bend
We cover all of Mission Bend, including its older and newer subdivisions. Our technicians are already in the area most days, which keeps response times short.
- Mission Bend North
- Mission Bend South
- Mission Bend East
- Westheimer Lakes
- Lakes of Mission Bend
Service Area – Cities Near Mission Bend
While most of our work stays inside Mission Bend, we regularly take calls from neighboring communities along the west side of the metro. If you’re just outside the immediate area, you may still be in our service range. We also serve Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX.
Serving Mission Bend, TX - Our Local Coverage Area
We’re based in the Mission Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Bend
Most Mission Bend calls are answered the same day, and we can often have a technician out the same day for urgent repairs. Emergency calls are answered around the clock by a live person, never a machine. Call (828) 426-7081 and we’ll get you on the schedule.
Repairs that keep the existing gate style and color generally don’t require HOA review in Mission Bend. Full replacements or changes to the gate’s design typically do. We work within your HOA’s restrictions and can help you understand what applies to your street before you commit to anything.
Yes. We run conduit, pull wire, and install or replace the transformer and control boards that power your gate. Because Mission Bend’s soil moisture damages underground wiring over time, we check the conduit condition on every electric gate job in this area. The written quote covers the full scope before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Bend Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.