Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Anna, TX
Warden Gate Repair is the gate company Anna homeowners call when an automated driveway gate stops opening, dragging, or grinding against shifted posts. Most of Anna’s housing stock went in after 2010, and that specific construction window means thousands of builder-grade gates here are hitting the same 7 to 10 year service threshold at the same time. Add Black Land Prairie clay that swells and shrinks seasonally under every post, and you get a repair pattern we see neighborhood by neighborhood, not just house by house. If your gate is failing in Anna, call (828) 426-7081 and we’ll give you a written price before any work starts.
Why Anna Homes Are Different
Anna sits directly on Black Land Prairie expansive clay, and that soil controls more gate failures here than any single component. After spring rains the clay swells and lifts gate posts a fraction of an inch. By August drought it contracts and drops them again. That seasonal cycling throws automated gates out of travel-limit calibration, causes metal-on-concrete dragging at the latch post, and slowly pulls hinge bolts out of true. Gate companies working on sandier Dallas-Fort Worth soils do not see this failure mode at the same rate. In Anna it is the default.
The second factor is the housing stock itself. Subdivisions platted between 2017 and 2021 often share the same general contractor and the same budget-tier gate operator model across dozens of adjacent streets. We regularly repair FAAC, BFT, and Linear units in Anna where the same capacitor or logic-board failure shows up street after street within a single development. When our techs carry that OEM part on the truck, an Anna repair that might take two trips elsewhere is done in one.
Our Main Anna Services
Most Anna calls fall into two groups: a gate that physically will not move, and a motor that runs but will not operate the gate correctly. Each has its own Anna page below.
Gate Repair in Anna
Anna’s clay soil and narrow construction windows create repeatable gate failures: posts out of plumb, sagging ornamental iron, worn hinges, and latch strikes that no longer align. The gate may drag, stick, or fail to close against the post. Our Gate Repair in Anna page covers what to check, what we fix on a first visit, and the written price range for common Anna jobs.
Electric Gate Repair in Anna
Electric gate problems in Anna are usually control-board failures, limit-switch drift from seasonal post movement, or wiring that has worked loose through hot-wet cycling. We diagnose the actual electrical fault before replacing anything, and every Electric Gate Repair in Anna job carries a written price and the 365-Day Done Right Promise.
Gate Motor Repair in Anna
The gate motor, the box that slides or swings your gate automatically, takes the brunt of Anna’s ice events and clay-driven misalignment. When a motor strains against a shifted post season after season, the gears and capacitors fail early. Our Gate Motor Repair in Anna page covers motor replacement, swing-arm and slide operators, and what we stock for Anna’s most common builder-installed brands.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Anna
We carry factory parts for the builders’ favorites in Anna: FAAC, BFT, and Linear, plus Viking. Because local subdivisions installed these in large batches, we stock the OEM capacitors, boards, and limit switches that keep a same-day Anna repair from becoming a parts-order wait. See our brands for the full service list.
Pricing for Gate Company in Anna, TX
| Service | Typical range in Anna |
|---|---|
| Gate won’t open or close | $180 – $340 |
| Gate motor replacement | $450 – $900 |
| Control board replacement | $250 – $600 |
| Hinge replacement | $150 – $350 |
| Post realignment | $200 – $500 |
| Limit switch adjustment | $120 – $250 |
| Remote or keypad programming | $90 – $180 |
| Full gate and motor diagnostic | $85 – $150 |
What pushes a number up in Anna is post movement: a gate that has been dragging through a full clay cycle often needs both mechanical realignment and limit-switch recalibration in the same visit. The written price we quote before work begins includes everything we will do, so you never see a surprise line item after the fact.
Neighborhoods We Serve in Anna
Our techs work across Anna’s HOA-governed subdivisions and the older original-town streets every weekday, with routes built to keep drive times short. Response is typically same-day or next-morning for Anna addresses.
- Anna Town Center
- West Crossing
- Pecan Grove
- Oak Hollow
- Noble Ridge
Service Area – Cities Near Anna
We repair gates across the Collin County corridor north of Dallas-Fort Worth, and scheduling is coordinated from our DFW office with crews serving Anna locally. If you’re nearby in Melissa, TX, Westminster, TX, McKinney, TX, or Celina, TX, you’ll get the same written price and photo-badged technician.
Serving Anna, TX - Our Local Coverage Area
We’re based in the Anna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Anna
Most Anna addresses get same-day or next-morning scheduling since our crews route through Collin County daily. Emergency calls, like a gate stuck open with no way to secure the property, get priority on the route. Call (828) 426-7081 and the live dispatcher will give you a real arrival window.
Most Anna HOAs require the gate to remain functional and matching the original design, but individual repairs on your own driveway gate rarely need pre-approval. If your gate is an HOA-governed entrance, confirm with your management company first. We can match the existing iron and hardware spec.
We diagnose and repair the low-voltage side of the gate operator system including transformers, wiring from the house to the gate, and the operator itself. For a new circuit from the main panel, your local licensed electrician will need to run that line to the gate before we connect the operator. Our diagnostic will tell you exactly what is needed.
Call (828) 426-7081 for a free estimate on any Anna gate repair. We answer 24/7, and you’ll get a written price before the job starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Anna Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.