Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Garland, TX
Gate repair in Garland comes down to one thing most other Texas cities don’t deal with: the soil. Garland sits on North Texas blackland prairie clay, the kind that swells when wet and shrinks when dry, and it pushes gate posts out of alignment season after season. If your gate drags, won’t latch, or leans in Garland, the post footing is usually the culprit, not the hinges. We’re Warden Gate Repair, and we send a named, photo-badged technician with a written price before any work starts. Call (828) 426-7081 and you’ll know exactly who’s coming and what it costs.
Why Garland Homes Are Different
Most of Garland’s residential streets were built out between the 1960s and 1990s, which means brick ranch and split-level homes with cedar privacy fences and single swing gates at the side or backyard. Those original cedar posts were set shallow, and after decades of clay movement they’re now rotting at the base and leaning. That means the dominant gate job in Garland isn’t a hinge swap; it’s pulling the post, setting a new one deeper in concrete, and re-hanging the gate so it actually clears the ground.
The climate compounds it. Garland sits in the DFW hail corridor, so spring storms dent aluminum and thin-gauge steel gates regularly. Then the wet winters and springs soak the clay, and the dry summers that top 100°F bake it. That cycle is why gate calls spike in April and May, after the winter-wet soil has fully heaved. A gate that swung fine in October will suddenly drag or refuse to latch. We’ve seen it in Garland for years. The fix almost always starts with the hinge post.
Our Main Garland Services
These are the two services Garland homeowners call us for most often, along with the one that ties them together. Each has its own dedicated Garland page with pricing detail and local conditions.
Gate Repair in Garland
Gate repair in Garland usually means a post reset, not a parts replacement. The clay heaves the post out of plumb and the gate starts dragging or swinging past the latch. We pull the old post, pour a deeper concrete footing below the clay movement line, and re-hang the gate with fresh hardware so it holds through the next wet season. Gate Repair in Garland has our full breakdown of what jobs look like on a 1960s to 1990s Garland lot.
Electric Gate Repair in Garland
Electric gates in Garland fail most often because the same clay movement that knocks posts out of square also puts stress on the operator arm and track. A gate that’s out of alignment works the motor harder, and that wears out gears and limits switches faster. We diagnose the operator and the post alignment together, because fixing one without the other means another call in six months. Electric Gate Repair in Garland covers the full scope of what we fix.
Gate Motor Repair in Garland
Gate motors in Garland face two local enemies: heat and misalignment. The dry summers push temperatures past 100°F, which cooks capacitors and control boards. The clay movement, meanwhile, forces the motor to pull against a gate that’s no longer square. We replace motors and boards from the brands Garland actually has installed, and we always check the post alignment before calling a motor dead. Gate Motor Repair in Garland details what that looks like.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Garland
We’re factory authorized on the brands most common in Garland’s 1960s-to-1990s neighborhoods: FAAC and BFT for swing gates, Linear and Viking for slide operators. We stock common parts for these locally, so most Garland repairs happen on the first visit. See our brands for the full list.
Pricing for Gate Company in Garland, TX
| Service | Typical range in Garland |
|---|---|
| Gate post reset and re-hang | $450 – $850 |
| Full post replacement with concrete footing | $650 – $1,200 |
| Gate frame rot repair at bottom rail | $250 – $500 |
| Sagging gate realignment | $180 – $400 |
| Hinge and latch replacement | $150 – $350 |
| Gate panel dent repair (hail) | $200 – $600 |
| Electric gate diagnostic and limit switch adjustment | $180 – $350 |
| Operator arm replacement | $500 – $1,100 |
| Gate motor replacement (standard swing) | $700 – $1,500 |
| Control board replacement | $350 – $800 |
What pushes a Garland gate repair higher is nearly always the post. If the clay has moved it enough that it needs a deeper footing with more concrete, that’s real material and labor. Whatever the job, the written price comes before we start, and it’s the price you pay. No surprise line items at the end.
Neighborhoods We Serve in Garland
We run gate repair calls across Garland from Firewheel to Duck Creek, from the older brick-ranch streets near downtown to the newer subdivisions on the north and east edges. Typical response time is same-day or next-day for most Garland neighborhoods, and we always send the tech’s name and photo before we arrive.
- Firewheel
- Duck Creek
- Coomer Creek
- Springpark
- Club Hill
Service Area – Cities Near Garland
Warden Gate Repair is based in the DFW area and serves Garland locally, with crews dispatched to the whole northeast corridor. If you’re in a neighboring city, we cover those too: Sachse, TX to the north, Rowlett, TX to the east, Wylie, TX up near Lavon, and Richardson, TX to the west. Same standard, same written pricing.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Garland
We typically schedule same-day or next-day for most Garland neighborhoods. When you call (828) 426-7081, we’ll give you a real arrival window and send the tech’s name and photo before they head your way, so you know who to expect at the door.
Most residential gate repairs and post resets don’t require a permit in Garland. If a job involves moving a driveway gate or changing the setback, we’ll flag that before we quote, and the written price covers everything we can see.
Yes. We serve the whole city, from Firewheel to Duck Creek and everywhere between, plus the neighboring cities of Sachse, Rowlett, Wylie, and Richardson. Scheduling is coordinated from our Dallas-Fort Worth office with local Garland crews.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Garland Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.