Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Aubrey, TX
Warden Gate Repair is the gate company Aubrey homeowners call when a gate stops sliding, swinging, or staying put. Aubrey sits at the collision point of working ranch land and explosive new-home construction, so the gate work here splits between agricultural pipe and tube gates on acreage properties and the swing and slide automated driveway gates flooding new subdivisions along US-377. Blackland Prairie clay shifts posts, summer heat cooks operator boards, and undersized builder installs fail early. If your gate is acting up in Aubrey, call (828) 426-7081 and we’ll send a named, photo-verified technician with a written price before any work starts.
Why Aubrey Homes Are Different
Two very different Aubrey housing types create very different gate failures. Older rural acreage properties, mostly pre-2010, lean on livestock fencing with manual tube gates or basic electric ranch gate operators. The newer subdivisions that appeared after 2015 brought longer driveways, builder-installed automated operators, and a pattern we see constantly: operators undersized for the weight of the gate or posts set shallower than they should be. That combination alone drives a disproportionate share of early repair calls in Aubrey.
Then there’s the clay. Aubrey sits squarely on the Blackland Prairie, and its expansive “black gumbo” soils heave and shrink through every wet-dry cycle. That movement knocks gate posts out of plumb and throws automated operators out of alignment, a problem that’s genuinely worse here than in cities built on sandier ground. On acreage subdivisions near the Pilot Point corridor, we regularly find posts set with shallow concrete footings because the original installer hit moisture and stopped. The post rocks seasonally, and re-setting it deeper is the only lasting fix. Add summer highs pushing 105°F that degrade nylon rollers and overheat control boards on west-facing gates, and Aubrey gates simply take more of a beating than most.
Our Main Aubrey Services
Aubrey homeowners reach out to us most often for two things: gate hardware that’s worn or broken, and the operator or motor that’s stopped responding. Here’s how each one plays out in Aubrey specifically.
Gate Repair in Aubrey
Gate repair in Aubrey usually means steel tube gates on ranch properties or steel and iron driveway gates in the newer subdivisions. We repair sagging frames, replace broken hinges and wheels, straighten leaners, and fix latches that no longer catch. On clay-soil Aubrey lots, the root problem is often the post, not the hardware, so we check plumb before touching the gate itself. Cole Rafferty started Warden Gate Repair in 2008 as part of the Threshold Group family, and the way we work hasn’t changed: diagnose, quote in writing, get the go-ahead, then fix. Read the full breakdown on our Gate Repair in Aubrey page.
Electric Gate Repair in Aubrey
Electric gate repair in Aubrey covers everything that carries current and signal: keypads, remote receivers, safety photo eyes, loop detectors, wiring, and the operator itself. On Aubrey’s newer builder-installed gates, we frequently find the operator was undersized for the gate weight on day one, which means the motor wears out far faster than it should. The clay soil compounds it when posts drift and the operator strains against misaligned track. We diagnose the full electrical path, not just the symptom. See what’s involved on our Electric Gate Repair in Aubrey page.
Gate Motor Repair in Aubrey
Gate motor repair in Aubrey addresses the box that slides or swings your gate automatically. When a motor burns out, the usual suspects here are the 105°F summer afternoons cooking west-facing control boards and long run times on undersized, builder-spec units. We service motors from FAAC, BFT, Linear, and Viking, among others, and we carry common replacement boards and capacitors to keep turnaround tight. We always quote in writing before replacing any motor. For specifics on what fails and what we do, visit our Gate Motor Repair in Aubrey page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aubrey
We service the gate and opener brands Aubrey actually has, including FAAC, BFT, Linear, and Viking. Because we stay factory-trained on the gear used across Texas, the right parts and the right knowledge arrive together instead of on a second trip. See our brands for the full list.
Pricing for Gate Company in Aubrey, TX
| Service | Typical range in Aubrey |
|---|---|
| Gate roller or wheel replacement | $180 – $340 |
| Hinge replacement (welded or bolted) | $220 – $420 |
| Gate post re-setting in clay soil | $400 – $800 |
| Keypad replacement and programming | $220 – $380 |
| Photo eye alignment or replacement | $160 – $300 |
| Gate operator control board replacement | $350 – $650 |
| Gate motor replacement (swing or slide) | $650 – $1,400 |
| Full electric gate tune-up | $180 – $320 |
Prices stretch toward the top in Aubrey when a clay-swelled post has to be dug out and re-set deeper, or when an undersized builder motor has burned out and needs a properly rated replacement. Whatever the job, you get a written quote before any work begins, and that’s the price you pay. No line items appear at the end that weren’t on the quote.
Neighborhoods We Serve in Aubrey
We work across Aubrey, from acreeage properties near the Pilot Point corridor to the new subdivisions stacked along US-377. Most Aubrey calls get a tech dispatched the same day, with the next day as the latest fallback for non-emergency work.
- Aubrey Creek Estates
- Sandbrock Ranch
- Silverado
- Aubrey Ranch
- ArrowBrooke
Service Area – Cities Near Aubrey
While this page covers Aubrey, our crews also work the surrounding communities. If you’re in Frisco, TX or Little Elm, TX, a different soil profile applies. For Denton, TX and Prosper, TX, the mix of older acreage and newer construction tracks closer to what we see in Aubrey.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aubrey
Most Aubrey calls are dispatched the same day, and emergency calls like a gate stuck open or a motor smoking get priority. Dispatch for Aubrey is coordinated from the Dallas-Fort Worth office, with crews working locally. Call (828) 426-7081 and a live person will tell you when to expect the tech.
Most gate repairs on existing posts don’t require a permit in Aubrey, but a full post re-set or new gate installation on a new driveway can trigger a permit check depending on your HOA or the specific improvement. We’ll tell you what applies to your property before any work is scheduled.
We see this constantly in Aubrey’s post-2015 subdivisions. Builder-installed operators are often undersized for the gate weight, and shallow posts in clay soil fail within a few years. We replace the operator with one properly rated for your gate and re-set posts deeper where needed. Call (828) 426-7081 for a written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aubrey Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.