Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Aubrey
A gate that won’t open or close in Aubrey isn’t an inconvenience to put off until next week. It’s a security gap on a property that may sit 100 feet from the road or 300 feet down a gravel drive off the Pilot Point corridor. We repair swing gates, slide gates, ranch pipe gates, and the operators that drive them, and we answer the phone live around the clock. Call (828) 426-7081 and you’ll get a real person, not a voicemail tree. Then you’ll get a technician’s name and photo sent to you before we arrive, plus a written price before any work starts.
Why Warden Gate Repair Is Aubrey’s Preferred Gate Repair Company
Aubrey is where working ranch land collides with new-home construction, and that shapes every gate call we take here. One property off FM 428 might have a 16-foot welded pipe gate on an acreage horse property. The house next door might sit in a post-2015 subdivision off US-377 with a builder-installed swing gate operator that has already failed twice. We are just as fluent in both. We service the nine brands that dominate this market: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs are background-checked, identity-verified, and photo-badged under the Threshold Standard, and we send you that name and photo before we knock. Warden Gate Repair is an independently owned location within the Threshold Group family, founded in 2008. Cole Rafferty leads the team.
Our dispatchers coordinate scheduling from the Dallas-Fort Worth office, but the crews that come to your door know Aubrey, know the clay, and know the failure patterns on the local gates. We back every repair with a written guarantee and one promise we take seriously: if the repair isn’t right, we come back and make it right at no charge. That’s the 365-Day Done Right Promise.
Metal Gate Repair in Aubrey
Metal Gate Repair in Aubrey usually means one of two things: a heavy ranch pipe gate on an acreage property that has started dragging or sagging, or a steel-framed automated driveway gate on a newer subdivision lot that no longer moves smoothly. Both are common here. The work typically involves resetting the hinge post, correcting the sag at the hinge, repairing or replacing the latch, and sometimes re-welding a split joint or a rusted-through bottom rail. What it costs depends on what we find, but here is the honest range for Aubrey: a hinge re-weld and post re-set on a pipe gate runs $240 to $420; a full post replacement with a deeper concrete footing runs $500 to $900; fixing a sagging steel driveway gate with hinge correction and operator realignment is generally $280 to $550.
The number we quote is the number you pay. You get it in writing before we touch anything, and it does not change at the end of the job.
Hinge and Post Repair on Acreage Gates
On Aubrey acreage properties, especially along the Pilot Point corridor, the most common metal gate failure is not the gate itself. It’s the post. Blackland Prairie clay heaves and shrinks with moisture, and a post set shallow in wet soil will rock. We re-set posts with deeper footings rather than just tightening the hinge bolts again.
Weld and Rust Repair on Steel Gates
Rust gets into the bottom rail and the hinge barrels first on Aubrey’s older pipe gates. We grind out the rot, weld in new steel, and re-coat the area. If the bottom rail is too far gone, we can cut and sleeve it. The gate keeps working and keeps its structure.
Wood Gate Repair in Aubrey
Wood Gate Repair in Aubrey is often a driveway gate on an older rural property or a side yard gate on a newer subdivision lot. The failure is almost always mechanical before it’s cosmetic: a hinge pulling loose from a split stile, a post starting to lean in the clay, a frame racking out of square so the gate drags and the latch no longer lines up. We re-seat hinges with longer lag bolts, rebuild stiles where the wood has split around the hardware, and re-set posts where the soil has moved. Typical costs in Aubrey: tightening and re-seating hinges on a wood gate runs $180 to $300; rebuilding a split stile or corner joint runs $250 to $450; resetting a leaning wood gate post in new concrete runs $350 to $650.
Again: you’ll see the written price before work begins. No end-of-job surprises.
Sag Correction on Wood Driveway Gates
A wood gate that drags on the ground has usually come out of square at the hinges. We correct the geometry at the hinge side, add a diagonal brace if the gate needs one, and reset the post if the clay has moved it. The fix is structural, not cosmetic.
Gate Realignment After Soil Movement
Aubrey’s clay moves every year. If a wood gate latches fine in spring and won’t catch by August, the post has heaved. We re-level the post, re-hang the gate, and often improve the footing so the same movement doesn’t undo the work next season.
Trusted Brands We Service in Aubrey
We are authorized service for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Aubrey, three brands show up most often: FAAC on acreage swing gates, Linear on subdivision builders’ installs, and Viking on older ranch openers that have been in the ground for fifteen years or more. We stock control boards, limit switches, photocells, and arm assemblies for these lines locally, which means we almost never have to order a part and return a second day. When we do, we tell you before we leave the driveway. Our Gate Repair team is factory-trained on all nine brands, so the diagnosis comes from someone who has seen the exact operator you own.
Common Gate Repair Problems We See in Aubrey Homes
- Operator blamed for a post problem. In Aubrey’s newer subdivisions, builder-installed openers get called “faulty” when the real issue is a hinge post that heaved in the clay and threw the gate out of alignment. The operator was fine. The footing was undersized.
- Photocells tripping every afternoon. West-facing gates in Aubrey get full afternoon sun. As the panel expands in the heat, it shifts enough to break the photocell beam. We see this pattern constantly on post-2015 builds.
- Nylon rollers wearing out in one season. Summer highs near 105°F soften and degrade nylon rollers, especially on gates with no shade. We replace them with heavier rollers suited to the heat, not the same spec that just failed.
- Ranch gates that won’t latch after a wet spring. On acreage properties near the Pilot Point corridor, heavy spring rain saturates the clay. Posts shift, gates change shape, and a latch that worked in March won’t catch in June. We re-set and re-align.
Pricing for Gate Repair in Aubrey, TX
Most gate repairs in Aubrey run between $200 and $900 depending on what’s wrong. A straight operator repair (new control board, limit switch, or photocell) is typically $220 to $480. Hinge and post work lands between $280 and $650 in most cases. A full post reset with a deeper footing, which is the lasting fix for Aubrey’s clay heaving, runs $500 to $900. Ranch pipe gate repairs and automated driveway gate repairs are both in scope. You’ll always have a written price in hand before we start, and every job includes the 365-Day Done Right Promise: if the repair fails within a year, we return and fix it for free. Call (828) 426-7081 for a free estimate.
We Also Serve Cities Near Aubrey
Warden Gate Repair covers Aubrey and the surrounding north Dallas-Fort Worth communities. If you’re in Frisco, Little Elm, Denton, or Prosper, you’ll get the same name-and-photo dispatch, written pricing, and guaranteed work. Our Gate Repair in Aubrey coverage area includes the full run of US-380, FM 428, and the acreage roads out toward Pilot Point.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aubrey
In our experience, a new-build gate in Aubrey that keeps tripping is usually a post or alignment problem disguised as an operator fault. The Blackland Prairie clay moves the posts, the gate panel shifts, and the operator gets blamed for working against a bad geometry. We had this exact call on a new subdivision road teeing into US-377: a builder-installed LiftMaster operator on a swing gate tripped its safety photocell every afternoon. The hinge post had heaved in the clay and thrown the panel out of alignment. We re-set the footing deeper, corrected the sag at the hinge, and realigned the operator arm. No new board needed. Call (828) 426-7081 and we’ll diagnose it the same way.
Yes. Automating a manual ranch gate on Aubrey acreage is routine for us, and it usually goes better when the post footings are deep enough for the operator’s load. If the posts were set shallow, we re-set or brace them as part of the install. We can run the power and conduit, mount the operator from any of the nine brands we service, and set up the safety edges and photocells so the gate meets entrapment protection standards. This is measured, scheduled work, not a same-day dispatch, and we’ll give you a written price for the full job before anything starts. Call (828) 426-7081 for a free measure and written estimate.
If your Aubrey gate sags every few months, the post is moving in the clay. Adjusting the hinge or the latch treats the symptom. The post needs to be reset deeper, or braced, so it stops shifting. On acreage subdivisions near the Pilot Point corridor, we routinely find original installers hit moisture in the hole and stopped short on the concrete footing. The only lasting fix locals have learned to insist on is re-setting that post deeper, not adjusting the operator again and again. Call (828) 426-7081 and we’ll get eyes on the footing.
Yes, and that’s the combination that makes Aubrey different from most of our service area. One road can have a horse property with a 16-foot welded pipe gate on one side and a new subdivision with a builder-installed automated swing gate on the other. We repair both, and we service all nine brands of operators: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. One team, both types of gate. Call (828) 426-7081 with what you have and we’ll tell you what it needs.
Every automated gate should have at least two independent entrapment protection systems: photo eyes across the gate opening and a safety edge or contact sensor on the gate’s leading and trailing edges, plus a reversing mechanism in the operator itself. On Aubrey properties where the clay moves the gate through the year, those safety edges and photocells need to be checked annually because an out-of-alignment gate can defeat the protection without you noticing. We test and adjust entrapment protection on every operator repair we do. Call (828) 426-7081 if your gate hasn’t been safety-tested in the last twelve months.
Written by Cole Rafferty, Owner at Warden Gate Repair. Cole leads the Aubrey gate repair team and has spent his career diagnosing gate failures across the Blackland Prairie’s shifting clay and the ranch-to-subdivision mix along US-377.