Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Benbrook, TX
Gate work in Benbrook, TX rarely looks the same from one street to the next. A 1970s ranch off Timberline Drive might have a sagging tubular-steel pedestrian gate, while an acreage property down a caliche lane near Benbrook Lake needs a full electric slide gate realigned after the clay soil shifted again. That spread of gate types is exactly what we handle. When your gate stops opening, drags on the ground, or won’t latch, call Warden Gate Repair at (828) 426-7081 and we’ll send a technician you know by name and photo before they arrive.
Why Benbrook Homes Are Different
Benbrook’s housing stock splits into two distinct worlds, and each one produces its own gate failures. The bulk of the city is brick ranch homes built from the late 1960s through the early 1990s, with wood or tubular-steel privacy gates now 30 to 50 years old. On those, we typically see deteriorated hinge welds, rotted wood frames, and latch hardware that finally stripped out. Out toward the western edge, acreage properties along the Benbrook Lake corridor run long gravel or caliche driveways with heavier welded-steel or pipe-frame gates and electric operators.
What ties both together is Tarrant County’s black clay soil. It shrinks hard through the long, hot, dry summers and swells when rain returns. That annual heave-and-shrink cycle shifts gate posts out of plumb, and gates that closed cleanly in March bind, drag, or gap at the latch by August. On automated gates, the movement is often enough to throw travel-limit settings off, which is one reason we see a surge of realignment calls out here every spring.
Our Main Benbrook Services
Most Benbrook homeowners call us for one of two reasons: a gate that won’t move at all, or an electric opener that quit responding. Each service has its own Benbrook page with the full details, pricing, and what to expect.
Gate Repair in Benbrook
A gate that drags across the driveway or won’t close flush against the post is usually a structural problem: shifted posts from clay movement, worn hinge barrels, a warped frame, or a latch that no longer lines up. In Benbrook, this work often means cutting out old rusted hardware on a 40-year-old ranch-home gate or straightening a pipe-frame driveway gate on an acreage lot. We always quote the repair before any work starts. Full details are on the Gate Repair in Benbrook page.
Electric Gate Repair in Benbrook
Electric gates in this part of Texas fail in patterns. Loose travel limits, dead capacitor on the board, a receiver that stopped talking to the remote, or wiring that got chewed by ants and mice in an enclosure. Around the lake corridor, a slide gate that’s drifted out of calibration after a dry summer is the most common call we make. We service FAAC, BFT, Linear, and Viking systems, among others, and bring the parts we’re likely to need. See Electric Gate Repair in Benbrook for specifics.
Gate Motor Repair in Benbrook
The gate motor, the box that slides or swings your gate automatically, works hardest in summer heat and after storms. In Benbrook, motors on heavy pipe-frame gates take a particular beating because the gate’s extra weight pulls against the operator when a post has shifted even half an inch. We diagnose whether the motor can be rebuilt or should be replaced, and give you a written price either way. Learn more on the Gate Motor Repair in Benbrook page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Benbrook
We maintain factory training and stock common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means most Benbrook repairs don’t wait on a second trip. See our brands for the full equipment list.
Pricing for Gate Company in Benbrook, TX
| Service | Typical range in Benbrook |
|---|---|
| Gate repair (labor only, parts separate) | $95 – $240 |
| Electric gate repair (control box, receiver, limits) | $180 – $340 |
| Gate motor repair (rebuild or replacement) | $250 – $480 |
| Hinge replacement (welded or bolted) | $120 – $280 per hinge |
| Post realignment due to soil movement | $175 – $450 |
| Automatic opener install on existing gate | $1,200 – $3,200 |
| Slide gate travel-limit recalibration | $110 – $195 |
| Latch and lock hardware replacement | $85 – $210 |
In Benbrook specifically, the biggest variables are post condition and gate weight. Older clay-shifted posts on ranch homes can add realignment work to what started as a hinge job, and a heavy pipe gate on an acreage property simply costs more to fix than a light ornamental pedestrian gate. Whatever the scope, we write the price down and you approve it before any work begins.
Neighborhoods We Serve in Benbrook
We service all of Benbrook, including the ranch-home subdivisions, the lake-area acreage properties, and the newer builds on the eastern edge. Typical response time within Benbrook is same-day for repairs, often within a few hours of the call.
- Timbercreek
- Vista Meadows
- Benbrook Lakeside
- Whitestone Ranch
- Clearwood Estates
Service Area – Cities Near Benbrook
Our Benbrook crews stay local, and we also serve nearby areas where the gate work is similar. If you’re in Fort Worth, TX or Dallas, TX, we cover those metros as well. For properties in Houston, TX or San Antonio, FL, our team can route service there through our Texas coverage network.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Benbrook
Yes. Most Benbrook repair calls are completed same-day, and we carry common gate and opener parts on the truck. Exact ETA depends on the day’s schedule, but the technician’s name and photo are sent before arrival.
That depends on your neighborhood. Some Benbrook HOAs require prior approval for visible changes like gate replacement or new automatic operators. We can give you the equipment specs your HOA will ask for, but approval always comes from them. Call (828) 426-7081 and we’ll help you sort it.
We’re an independently owned and operated location within the Threshold Group family, with scheduling coordinated out of our Dallas-Fort Worth office. Crews are dispatched to Benbrook locally, and every technician meets the Threshold Standard: background-checked, identity-verified, and photo-badged before they reach your door.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Benbrook Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.