Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cloverleaf, TX
Gate repair in Cloverleaf, TX usually costs between $180 and $900 depending on the job, with most common repairs like hinge fixes, weld cracks, and operator resets landing in the $250 – $450 range. Cloverleaf is different from most Houston-area gate work because so much of it is flood recovery, not routine wear. Driveway gates here weren’t just aged by humidity and sun; many were pushed sideways by Harvey’s standing water, and a lot of what we’re called to fix traces back to that event. Call (828) 426-7081 for a written price before any work starts.
Why Cloverleaf Homes Are Different
Cloverleaf sits low and flat, an unincorporated Harris County community where the drainage reality shows up in the gates themselves. The expansive clay under the neighborhood soaks up storm water and heaves, which is why we see so many sunken posts and gates that no longer line up with their latch or track. A gate that closed cleanly in March may drag by June because the footing shifted a quarter inch. These aren’t hinge problems; they’re soil problems, and they need more than a shim.
The housing stock shapes the work too. Most Cloverleaf homes were built between the 1950s and 1970s as ranch-style properties on mid-size lots. A large share have chain-link or tubular steel driveway gates protecting trucks, trailers, or work equipment. That reflects a working-class, trades-and-transport economy where the gate isn’t decorative, it’s how a family keeps a livelihood secured at night. Humidity and near-annual heavy rain accelerate surface rust on bare steel faster than in drier parts of Texas, so corrosion repairs and post replacement come up constantly.
One more thing worth knowing: because Cloverleaf is unincorporated, gate work falls under Harris County rules rather than City of Houston permitting. A lot of automatic gate installations went in years ago with no inspection and with low-voltage wiring run at or below grade. After Harvey, we routinely find operators that were submerged and then “dried out” instead of replaced. Those corroded boards fail intermittently, often during the next heavy rain, which is why a lot of Cloverleaf calls start with “it worked fine until the storm.”
Our Main Cloverleaf Services
The three jobs Cloverleaf homeowners call about most are general gate repair, electric gate repair, and gate motor repair. Each has its own Cloverleaf page with pricing, timelines, and the specific way we handle these jobs in this part of Harris County.
Gate Repair in Cloverleaf
Most gate repair calls in Cloverleaf are about gates that drag, sag, or won’t latch because a post has shifted in the clay or a weld cracked at the collar. We realign and reinforce posts, re-weld broken joints, replace rusted hinges, and fix latch alignment so the gate actually closes and holds. The humidity here means bare steel parts corrode quickly, so we check the whole gate for weak points, not just the part that failed. See Gate Repair in Cloverleaf for full pricing and how we inspect a gate after flood exposure.
Electric Gate Repair in Cloverleaf
Electric gate repair in Cloverleaf usually means troubleshooting an operator that stopped working after rain, or a gate that opens but won’t close properly. The flood history here is significant: we still open control boxes and find silt marks from 2017, with boards that were never replaced. Wiring run below grade is often the problem, not the motor. We test sensors, wiring, safety edges, and the operator itself before recommending anything, and we quote the repair in writing before starting. See Electric Gate Repair in Cloverleaf for more detail.
Gate Motor Repair in Cloverleaf
Gate motor work in Cloverleaf focuses on the gate motor, the box that slides or swings your gate automatically. The most common failure here is a submerged operator that was dried out but never actually replaced, leaving a circuit board that works intermittently and dies again in the next heavy rain. We service Viking, Ghost Controls, DoorKing, and Elite motors, among others, and we can often replace a board or capacitor the same visit. See Gate Motor Repair in Cloverleaf for motor-specific pricing and how we test operators after flood exposure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cloverleaf
We service Viking, Ghost Controls, DoorKing, and Elite gate operators, and we’re factory-trained across nine major brands for the right parts and the right knowledge together. Common boards, remotes, and safety-edge components for the most-used Cloverleaf operators are stocked locally so most jobs finish in one visit. See our brands for the full list.
Pricing for Gate Company in Cloverleaf, TX
| Service | Typical range in Cloverleaf |
|---|---|
| Gate repair, minor (hinge, latch, realignment) | $180 – $340 |
| Gate repair, moderate (weld crack, post reinforcement) | $300 – $550 |
| Gate repair, major (post replacement, full re-hang) | $500 – $900 |
| Electric gate troubleshooting and diagnosis | $120 – $250 |
| Electric gate repair (sensor, safety edge, wiring fix) | $220 – $480 |
| Gate motor board replacement | $280 – $520 |
| Gate motor replacement (residential) | $450 – $950 |
| Gate motor installation with existing gate | $600 – $1,200 |
What pushes a Cloverleaf job toward the high end of these ranges is usually flood damage: a post that needs replacing because the footing shifted, corrosion that spread further than expected, or wiring that has to be re-run because it was installed below grade years ago. The written price we give you before work starts is the price you pay. No surprise line items at the end, ever.
Neighborhoods We Serve in Cloverleaf
We serve all of Cloverleaf and the surrounding unincorporated Harris County pockets. Most calls come from the residential streets between I-10 and Beaumont Highway, where the original 1950s – 1970s ranch lots hold chain-link and tubular steel gates. Response is typically same-day or next-day for repairs, with emergency calls handled through our live 24/7 phone line.
- Cloverleaf core (between I-10 and Beaumont Highway)
- North Shore area along Uvalde Road
- Streets north of Market Street toward the San Jacinto River
- Unincorporated Harris County lots east of Beltway 8
Service Area – Cities Near Cloverleaf
We handle gate work across the greater Houston area, including Houston, TX and Dallas, TX to the north, plus Fort Worth, TX and San Antonio, FL for clients whose properties or crews span multiple markets. If you’re not sure your location is covered, call (828) 426-7081 and a live person will confirm it.
Serving Cloverleaf, TX - Our Local Coverage Area
We’re based in the Cloverleaf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cloverleaf
Most repair calls in Cloverleaf are scheduled same-day or next-day. Emergency calls are handled through our live 24/7 phone line, never a voicemail or chatbot. A real person answers, takes the details, and gets a tech dispatched. Call (828) 426-7081 and we’ll tell you when we can be there.
Cloverleaf is unincorporated, so gate work falls under Harris County rather than City of Houston permitting. Most repairs and like-for-like replacements don’t require a permit, but we’ll check the specifics of your job and flag anything that needs county sign-off. We handle that conversation so you don’t have to.
In Cloverleaf’s flood plain, standing water saturates gate post footings and finds its way into operator housings. Many older installations had low-voltage wiring run below grade, and after Harvey those wires and control boards were submerged. If the board was dried out instead of replaced, it fails intermittently, often during the next rain. We test the whole path, from wiring to safety edges to the board, before recommending a repair.
For gate repair in Cloverleaf, TX with a written price before any work starts and the 365-Day Done Right Promise on every job, call (828) 426-7081. A live person answers, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cloverleaf Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.