Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clovis, CA
Gate repair in Clovis, CA follows a pattern all its own: this city’s rapid build-out of HOA-governed communities means most calls involve matching a specific ironwork profile, a particular powder-coat finish, and an automated operator spec written into a covenant years before the first homeowner moved in. It’s not just fixing a gate. It’s fixing a gate that has to look exactly like the one next door and the one after that. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, and we quote a written price before any work begins. Call (828) 426-7081 and you’ll get a real person, a real price, and no surprises.
Why Clovis Homes Are Different
Clovis is dominated by 1990s through 2010s master-planned subdivisions: stucco exteriors, tile roofs, and ornamental iron fencing and gates installed as part of a uniform streetscape. Developments like Harlan Ranch and the corridors along Herndon and Shaw Avenue are dense with HOA-governed driveway and side-yard gates that carry strict architectural standards. When a gate fails, a homeowner is often required to match the original powder-coat finish and ironwork profile rather than bolting on whatever the nearest supplier has in stock. That’s a repair reality we see in Clovis far more than in Fresno’s older, mixed-stock neighborhoods.
The climate does its own work on those gates. San Joaquin Valley summers routinely pass 105°F, and the thermal expansion in iron frames can rack automated operators out of alignment and warp wooden accent panels. Then comes Tule fog season from December through February, when ground-level moisture hangs in the air for days. That’s when we see rust settling into lower gate rails, pivot points, and buried hinge hardware. Clovis also has one quirk most outsiders don’t know: with hard groundwater feeding drip and spray irrigation across the newer subdivisions, mineral scale builds on gate rollers, tracks, and hinges faster than almost anywhere else in the Valley. We budget extra time for descaling on any Clovis gate with active lawn irrigation.
Our Main Clovis Services
Clovis homeowners call us most often about two things: an automatic gate that won’t move properly, and the motor underneath that stopped making it move at all. Here’s how each one works in Clovis.
Gate Repair in Clovis
Most Clovis gate repair calls are for exactly one of three things: a sagging iron gate that’s started dragging on its track, a roller or hinge seized by hard-water mineral scale, or a steel frame that’s out of square after one too many 105°F summers. In an HOA community, the job often includes matching the original finish and profile so the repair doesn’t stand out from the neighboring gates. We quote a written price before any work starts, and every job carries the 365-Day Done Right Promise: if the repair isn’t right, we come back and make it right, free. See the full picture at Gate Repair in Clovis.
Electric Gate Repair in Clovis
Electric gate repair covers the powered side of a gate: limit switches, safety edges, photo eyes, control boards, keypads, and the low-voltage wiring feeding them. Clovis’s Tule fog season is tough on outdoor electronics, and we regularly replace corroded connections and circuit boards in December through February. Many HOA communities here also standardize on a single operator brand, which means the repair often has to match what the association already approved. We carry parts for Linear, Viking, Ghost Controls, and DoorKing, among others, and we quote a written price before touching anything. Details are on Electric Gate Repair in Clovis.
Gate Motor Repair in Clovis
The gate motor, the box that slides or swings your gate automatically, takes the most punishment of any gate component. Clovis heat accelerates capacitor and transformer wear; hard-water spray from nearby irrigation adds corrosion on top. When a motor fails, the right repair depends on correctly diagnosing the motor versus the control board versus a misaligned gate producing excessive resistance. We service all nine major brands and stock the common failure parts locally so a repair doesn’t wait on a distant shipment. Written price first, 365-Day Done Right Promise on every job. Full scope is at Gate Motor Repair in Clovis.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clovis
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Clovis, we see a heavy concentration of Linear and Viking operators in the older HOA builds, plus Ghost Controls and DoorKing in the newer ones. Stocking common failure parts locally means most simple repairs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Company in Clovis, CA
| Service | Typical range in Clovis |
|---|---|
| Gate repair service call and diagnosis | $75 – $125 |
| Gate roller replacement | $85 – $150 |
| Gate hinge replacement | $95 – $180 |
| Track realignment | $110 – $200 |
| Welding repair of an iron gate frame | $140 – $300 |
| Powder-coat touch-up to match HOA finish | $60 – $140 |
| Electric gate diagnostic and board-level repair | $120 – $250 |
| Gate motor replacement | $450 – $950 |
| Control board replacement | $200 – $450 |
| Photo eye or safety edge replacement | $110 – $220 |
| Hard-water descaling of rollers, tracks, and hinges | $70 – $160 |
What pushes a Clovis price up is almost always HOA-driven matching: a custom powder-coat color, an unusual ironwork profile, or an operator model the association wrote into its architectural standards. What never changes is the quote: we hand you a written price before any work starts, and that’s the price you pay.
Neighborhoods We Serve in Clovis
We work across the whole city, but a lot of our calls come from the Herndon and Shaw Avenue corridors, Harlan Ranch, and the other master-planned subdivisions built between the 1990s and 2010s with matching iron gates and HOA standards. We also see older wood and chain-link gates near Old Town Clovis. Typical response time in Clovis is same-day for repairs and next-day for most replacements.
- Harlan Ranch
- Herndon Avenue corridor
- Shaw Avenue corridor
- Old Town Clovis
- Clovis East and surrounding subdivisions
Service Area – Cities Near Clovis
Most of our Clovis customers live right here, but we regularly work the surrounding Central Valley communities. That includes Fresno, TX, Sanger, TX, Fowler, CA, and Madera, CA. Dispatch and scheduling are coordinated from our Fresno, Central Valley office, and crews serve Clovis locally.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clovis
We answer the phone 24/7 with a real person, not a voicemail or a chatbot. Most Clovis repairs can be scheduled same-day, especially if you call before midday. Replacements and custom-HOA-match work are usually quoted quickly but scheduled a few days out. Call (828) 426-7081 and you’ll get a straight answer on timing.
In many Clovis communities, yes, especially for any change to the visible finish, ironwork profile, or operator model. Repairs that restore the original appearance and hardware usually don’t require new approval, but a changed finish or motor often does. We’ve handled enough Clovis HOA jobs to help you know which path applies. Call (828) 426-7081 and we’ll walk through it.
Yes. Every single job, no exceptions. We diagnose first, then hand you a written quote, and no work starts until you approve it. The 365-Day Done Right Promise means if the repair isn’t right, the return visit is free. Call (828) 426-7081 for a free estimate on your gate.
If your gate is sticking, sagging, or refusing to open, call Warden Gate Repair at (828) 426-7081. You’ll get a real person, a written price before any work begins, and a repair backed by the 365-Day Done Right Promise. Back to home
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.