Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Clovis
Electric gate repair in Clovis typically costs $180 to $340 for common issues like operator resets, sensor realignment, and limit-switch calibration. Full operator replacements run higher, usually $650 to $1,400 depending on the brand and whether the original build left you without conduit or a proper power run. If your gate won’t open, won’t close, or grinds against itself every morning, call us at (828) 426-7081 and we’ll get a Clovis-based crew to your property fast.
We know Clovis gates because we work on them every week: the ornamental iron driveway gates in Harlan Ranch, the side-yard pedestrian gates along Herndon, the stucco-walled courtyard setups in the newer subdivisions off Shaw. Most of what we see here comes down to three things: builder-grade operators that were never quite right from day one, power runs that should have gone in during the build but didn’t, and hard irrigation water slowly choking the hardware. We’ll get into each of those below, with real numbers and real fixes. First, the short version of what makes Warden different: you get a name, a photo, and a written price before any work begins. Every time.
Why Warden Gate Repair Is Clovis’s Preferred Electric Gate Repair Company
Most gate companies serving Clovis dispatch an anonymous tech with a vague estimate. Warden doesn’t. The Threshold Standard is our operating rule on every visit: the technician assigned to your Clovis home is background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival. When the doorbell rings, you match the face to the photo. No wondering who’s in your driveway.
Our crews work the Clovis market specifically, which matters more here than people realize. The HOA layer in Clovis is real and enforceable. A gate that looks fine to an out-of-town tech can still fail a Harlan Ranch architectural review because the operator housing doesn’t match the community spec or the powder-coat finish is off by a shade. We handle that paperwork reality from the first visit, not as an afterthought. It’s part of why Clovis homeowners keep us on their list.
The 365-Day Done Right Promise backs every repair we make in Clovis. If something isn’t right within a year, the return visit is free. That’s written into every job. Call (828) 426-7081 and you’ll speak to a live person, 24/7. Not a voicemail. Not a chat window. Cole Rafferty runs this operation, and the whole model is built on answering the phone.
Electric Gate Motor in Clovis
Electric Gate Motor work in Clovis almost always splits into two realities: repairing the gate motor (the box that slides or swings your gate automatically) on an existing automated gate, or adding automation to a gate that was installed manual because the builder never ran power. That second scenario is disproportionately common in Clovis’s 1990s-2010s master-planned subdivisions, where the ornamental iron gate went in as part of the community aesthetic but the conduit and operator were often value-engineered out of the original build.
A straight motor repair on an existing Clovis gate typically runs $180-$340. That covers diagnosing a short-cycling operator, replacing a failed capacitor or logic board in linear-ram units, or resetting torque limits after the San Joaquin Valley heat has racked the frame off alignment. When the motor itself needs replacement, expect $450-$900 for most residential swing or slide operators, including the labor to set travel limits and tune the force settings so the gate doesn’t slam or stall.
The bigger number comes when there’s no power at the post, which happens in Clovis far more often than it should. Trenching conduit, setting a proper post footing, and pulling a dedicated circuit to a gate that was never wired runs $1,200-$2,500 depending on run length and whether you’re crossing driveway concrete or cutting through landscaping beds. That’s not a motor quote, that’s an infrastructure quote, and any honest Clovis gate company should tell you the difference before work starts.
Builder-Grade Operators and Conduit Work
At a Harlan Ranch home off the Herndon corridor, our tech answered a call about a builder-grade LiftMaster swing gate operator that had been short-cycling and dragging for weeks on a driveway gate with no conduit run at all. The original build just ran surface cable. We set a proper post footing with buried conduit, leveled the gate, corrected the sag at the hinge post, and reset the operator so the homeowner could pass HOA review on the runner and finish. Within a day the gate was cycling clean and the homeowner had paperwork matching the community’s operator specs.
That job is representative. We budget extra time on most Clovis motor work for descaling because the hard groundwater so many of these subdivisions pump into their drip irrigation leaves mineral crust on rollers, tracks, and hinge pins. A gate that binds feels like an operator problem, but the operator is often fine. The hardware below it is the issue.
Operator Brands We Install and Repair in Clovis
We service what Clovis builders actually installed, which means a lot of LiftMaster and Linear units, plus Viking, Ghost Controls, and DoorKing where homeowners or HOAs upgraded. Parts for these are stocked locally, not shipped from a warehouse in another state, so most Clovis repairs close the same day or next morning.
Gate Access Control in Clovis
Gate Access Control in Clovis typically means keypads, remotes, intercoms, and the loop detectors or photo-eye sensors that tell the operator when to open and when to stop. It’s the command system layered on top of the motor, and in a city built around HOA-governed communities, it’s where we see the most confused hardware: three different remotes from two different brands, a keypad that no longer matches the community’s approved entry method, or a safety sensor that got knocked sideways by a gardener’s trailer and now refuses to let the gate close.
Keypad and remote repairs in Clovis run $60-$180 per device including labor, programming, and testing. A failing loop detector on a slide gate runs $180-$320 to diagnose and replace. Full access control integration, where you’re adding a visitor intercom or tying the gate into a home automation system, runs $600-$1,500 depending on wiring distance and brand compatibility. We’ll give you a written price before any work starts, and if you’re in an HOA, we’ll help you flag any architectural-review trigger points early so you’re not re-doing work after the fact.
HOAs and Gate Access in Clovis
If you live in Harlan Ranch or any of the newer communities along Shaw, your HOA likely has approved operator makes and models, and sometimes approved finish colors. An access control upgrade that violates covenant can get flagged at the next walkthrough, even if it works perfectly. We keep common Clovis HOA spec sheets in the truck, and when a community’s rules are unusually strict, we’ll pull them before quoting so you’re not caught between a functioning gate and an angry board.
Irrigation and Access Hardware
One of the most common Clovis-specific failure points is the keypad or sensor post sitting inside a landscape bed. Hard groundwater spraying up against the post leaves mineral crust that seeps into the keypad housing and shorts the membrane contacts. A keypad that stops responding isn’t always dead. Sometimes it’s just caked in calcium and needs a dismount, a descale, and a sealed reinstall.
Trusted Brands We Service in Clovis
We’re factory-trained across nine major gate and opener brands, and in Clovis the ones we see daily are Linear, Viking, and Ghost Controls, with a steady stream of DoorKing on the larger slide gates in the newer subdivisions. Having local parts stock for these brands means we don’t order a board on Monday and hope it lands by Thursday. Most Clovis repairs go from diagnosis to done in a single visit, and when an HOA demands a specific operator model, we know which units meet covenant and which ones will get bounced back. You don’t need a different gate company for each brand. You need a crew that’s seen all of them in this exact market. That’s what we do.
Common Electric Gate Repair Problems We See in Clovis Homes
- No power at the gate post. The builder installed the ornamental iron gate for HOA compliance, but conduit and a power run were never part of the scope. Any automation work means trenching, a post footing, and probably an electrical permit. We quote this honestly from the first visit so there’s no sticker shock later.
- Iron frames racking out of alignment in valley heat. Clovis regularly pushes past 105°F in July and August. Thermal expansion twists the frame, the operator’s limit switches fall out of sync, and the gate starts slamming or short-cycling. Re-setting limits is cheap. Ignoring it until the rack strips isn’t.
- Mineral scale binding rollers and hinges. Hard irrigation groundwater is the quiet killer in Clovis’s newer subdivisions. Crust builds on rollers, tracks, and pivot pins until the gate drags, stalls, or trips the safety edge. We see it misdiagnosed as a bad motor constantly. The fix is usually descaling and re-lubrication, not a new operator.
- HOA finish-matching on replacement parts. A replacement post, a new hinge, or a repainted operator cover has to match the community’s powder-coat spec or the next architectural review flags it. We match finishes before we order, not after the part arrives.
Pricing for Electric Gate Repair in Clovis, CA
Here’s what Clovis homeowners should expect, using real ranges from jobs we’ve completed in this market. A basic service call with diagnosis and minor adjustment runs $95-$160. Keypad or remote programming runs $60-$180. Sensor realignment or replacement runs $100-$260. Motor repair on an existing automated gate runs $180-$340. Full operator replacement runs $650-$1,400 for most residential brands. Adding automation where no power exists, including conduit trenching and a post footing, runs $1,200-$2,500.
Every price is written down and agreed before we touch a single bolt. You’ll never get a surprise line item at the end because we don’t work that way. If you call (828) 426-7081, we’ll schedule a free Clovis estimate, send you the tech’s name and photo, and give you the number before work begins.
We Also Serve Cities Near Clovis
Our Clovis crews also cover Fresno, Sanger, Fowler, and Madera, so if you manage rental properties or a family member’s home across the Fresno-Clovis line, the same Electric Gate Repair team can handle it. We don’t hand off to a different company when you go one exit past the city limit. The phone number stays the same, and so does the Threshold Standard. For the fullest picture of our service area and what we fix, see Electric Gate Repair in Clovis.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Clovis
Yes, we do this regularly in Clovis subdivisions along Herndon and Shaw, including Harlan Ranch. It means trenching conduit from the nearest circuit, setting a proper post footing for the operator, and pulling a dedicated line, which usually runs $1,200-$2,500 depending on distance and whether we’re crossing concrete. We’ll also check that your chosen operator matches the HOA’s spec so the architectural review doesn’t bounce it. Call (828) 426-7081 for a free measure and written price.
Tule fog does it. From December through February, ground-level moisture sits on Clovis gates for days at a time, and that accelerates rust on the lower rails, pivot points, and buried hinge hardware. Combine that with cold contracting the frame and summer heat already weakening the operator settings, and late winter is our busiest season for binding gates and stalled operators. We check rust and re-align the track as part of every winter repair.
Almost never. A sagging gate drags and forces the operator to work harder, which eventually kills it, but the sag itself is a hinge-post and frame issue. In Clovis we fix this by resetting the hinge post, correcting the frame alignment, and only then evaluating the operator. Often the operator is fine once the gate moves freely again. We’ll tell you if it’s salvageable, and the answer is usually yes.
Yes, it’s one of the most common things we see on newer Clovis gates. The hard groundwater used for drip and spray irrigation leaves mineral crust on rollers, tracks, and hinge pins, which binds the gate and can look exactly like a blown motor. If your gate sits near a sprinkler head or a drip line, we’ll descale the hardware as part of the repair and check that the irrigation isn’t spraying the post directly going forward.
First, check the breaker and make sure the gate isn’t just tripped. Second, look at the track and rollers. If there’s white mineral crust built up, that’s your answer and it’s usually fixable without replacing the operator. Third, note whether the gate has power at all. If the keypad lights but nothing moves, that’s different from a completely dead post. Then call (828) 426-7081 and tell us what you see. We’ll walk through next steps on the phone, no charge, and schedule a Clovis visit if it needs eyes on it.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Clovis.