Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Daly City
Gate repair in Daly City usually means one of three things: a rusted hinge post that has finally let go, a gate that drags on a sloped concrete pad, or an automatic opener that stopped responding to the remote. Most jobs we handle here run between $185 and $640 depending on whether we are replacing hardware or rebuilding a corroded post footing. We are the gate and opener specialist serving Daly City neighborhoods like Westlake, St. Francis Heights, Broadmoor, and the hillside streets off Southgate Avenue. If your gate is sagging, seized, or dead at the motor, call (828) 426-7081 and we will give you a written price before any work starts.
Why Warden Gate Repair Is Daly City’s Preferred Gate Repair Company
We are not a general handyman service that happens to fix gates. We are Warden Gate Repair, and gates and gate openers are the only thing we do. That narrow focus matters in Daly City, where the marine layer off the Pacific eats at steel faster than almost anywhere else on the peninsula. Our Gate Repair team knows what fails first out here and what actually holds up. Cole Rafferty leads our crew, and every technician who comes to your door has passed the Threshold Standard: background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival.
Daly City homeowners call us because they know who is coming before they open the door. We are not anonymous. When you book a repair, you get a text or email with your technician’s name and photo before we arrive. At the door, the photo ID badge matches the person standing there. That is the whole point of a warden being trusted to watch over a place and keep it secure. And every repair carries the 365-Day Done Right Promise: if the fix is not right, the return visit is free, in writing.
We answer the phone 24/7 with a live person. Not a voicemail tree, not a chatbot. When your gate will not close and your driveway is open to the street, you talk to a human who can schedule a Daly City call right then. Dispatch and scheduling for our Bay Area crews run out of the San Francisco Bay Area office, and our techs roll into Daly City neighborhoods from Westlake to Serramonte every day.
Gate Welding in Daly City
Gate welding in Daly City is usually about two things: repairing a rust-eaten hinge post footing or mending a cracked ornamental iron weld that has been quietly failing for years under paint. In a normal climate that weld might hold for decades. Out here, under persistent coastal fog, moisture works into the joint and oxide expands inside the steel, splitting it from within. A typical weld repair on a driveway gate in Daly City runs $180 to $420. If the post itself has rusted through at the ground line and we need to cut out the corroded section, set a new galvanized post in fresh concrete, and re-hang the gate, expect $380 to $640. The written quote you get before we start is the price you pay. No surprise line items at the end.
Post-Footing Replacement on Doelger-Era Gates
The original ornamental iron side-yard gates on those post-WWII Doelger stucco homes are now 70 to 80 years old. The welds that looked fine ten years ago are failing in waves, which is why we see entire blocks in Westlake and St. Francis Heights where gates rust out at roughly the same time. When a hinge post rusts through at the base, you cannot just patch it. We cut out the corroded section, set a new galvanized post, and use stainless fasteners so the fix actually survives the coast.
Weld Remediation Without Full Replacement
Not every failed weld means the whole gate is scrap. If the ornamental ironwork is otherwise straight and the bottom rail is intact, we open up the joint, remove the rust, weld it solid, and treat the surround before repainting. That repair typically saves a homeowner $800 to $1,400 versus a full replacement gate, and it keeps the original character of the house intact. We were called to a 1950s Doelger stucco home in Westlake where the original swing gate had seized completely: the hinge post had rusted through at the ground line and the gate was dragging on the sloped concrete pad. Our crew cut out the corroded post footing, set a new galvanized post in fresh concrete, and replaced the painted-steel hinges with stainless fixings and a marine-grade latch. Two blocks over, we did the same job on an identical gate that was already showing the same rust bloom at the hinge post, even though the homeowner had repainted it just three years earlier.
Commercial Gate Repair in Daly City
Commercial gate repair in Daly City covers sliding gates on steel tracks, cantilever gates on commercial lots, barrier arm operators, and the high-cycle swing gates you see at apartment complexes off Junipero Serra Boulevard and around Serramonte Center. These gates run hundreds of cycles a day, and the salt-laden fog compounds the wear. A commercial gate repair here typically runs $320 to $900, depending on whether we are replacing rollers, rebuilding a track, or swapping an operator board. We give a written price for commercial work before we touch anything, and the 365-Day Done Right Promise applies to every job we do, commercial included.
Track and Roller Service on Salt-Exposed Gates
Coastal fog means steel tracks on commercial sliding gates rust and pit faster out here. Pitted rollers bind and chew up the top of the track, which then needs grinding or section replacement. We service factory-trained across LiftMaster, FAAC, BFT, Linear, and Viking operators, which means the same crew that fixes the mechanical gate can also diagnose and repair the opener controls.
Operator Replacement and Controls
When an operator board fails on a commercial gate, the gate either will not open for tenants or will not close for security. We carry common parts for FAAC, BFT, and LiftMaster operators on our trucks, and for older Linear or Viking panels we can usually source a replacement locally within one or two business days. If your complex or business property in Daly City has a gate down, call us for a written quote and a real name before we arrive.
Trusted Brands We Service in Daly City
We are authorized to service nine major gate and opener brands, and the ones we see most in Daly City driveways and apartment lots are FAAC, BFT, Linear, and Viking. Factory training on those lines means the right parts and the right knowledge arrive together, in one truck, on the first visit. For Daly City customers, we stock common hinge pins, marine-grade latches, stainless fasteners, and opener control boards locally so a repair is not waiting on a three-day part shipment. If your opener has a brand name stamped on the box and you are not sure what it is, call us and describe it. We will tell you whether we can fix it before we schedule anything.
Common Gate Repair Problems We See in Daly City Homes
- Rusted hinge posts failing at the ground line. The original steel posts on Doelger-era gates corrode at the base where standing fog moisture sits longest. By the time the gate sags visibly, the post is often rusted through inside.
- Gates dragging across sloped driveway pads. Much of Daly City was graded into steep coastal hillsides. When the concrete settles and the slope shifts, the gate binds at the latch side and stops closing cleanly.
- Seized latches and hinge pins from marine-layer humidity. Surface rust works into the moving parts first. A latch that is stiff today will seize completely within a season or two if it is not pulled, cleaned, and re-lubricated with marine-grade grease.
- Opener boards corroding in exposed boxes. Even sealed control boards absorb moisture over years of fog cycles. The failure is usually intermittent first: the gate opens but will not close, or the remote works only when you stand three feet away.
Pricing for Gate Repair in Daly City, CA
You should know what a repair costs before you call. Here are the ranges we quote most often in Daly City. A hinge and latch replacement on a standard side-yard gate runs $185 to $340. Grinding and repairing a rust-failed weld runs $180 to $420. Cutting out a corroded post footing and setting a new galvanized post runs $380 to $640. A full realignment on a sloped driveway gate runs $240 to $480. Operator board replacement runs $290 to $540 depending on brand. The price you are quoted is the price on the invoice. We quote written, before any work starts, every time. Call (828) 426-7081 and we will walk you through what your specific gate needs.
We Also Serve Cities Near Daly City
Our crews drive these same hills and fog belts every day. If you are a homeowner in Brisbane, South San Francisco, San Bruno, or Pacifica and your gate is rusting, sagging, or the opener is not responding, the same written-price guarantee and Threshold Standard applies. Daly City is home base for our local routes, but these neighboring cities are right on the way. Call us and we will give you a direct answer about when we can be there.
Serving Daly City, CA - Our Local Coverage Area
We’re based in the Daly City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Daly City
Daly City sits directly under one of the most persistent marine layers on the California coast, and that fog carries salt-heavy Pacific moisture that settles on iron and steel for hours every morning. San Mateo and South San Francisco sit further from the open-water fog path and get less of it. Meanwhile, most of Daly City’s housing stock is Doelger-era stucco from the 1940s and 1950s, meaning thousands of original ornamental iron gates are now at the same point in their corrosion cycle. That combination of climate and housing age is why Daly City gates fail earlier and rust faster. If your gate is stiff, sagging, or staining at the hinges, call (828) 426-7081 for a free estimate in writing.
In most cases it is absolutely worth repairing. Those original ornamental gates have character you cannot reproduce with a big-box replacement panel, and when the metal is straight, a weld remediation plus new galvanized post and stainless hardware brings it back for a fraction of replacement cost. We have repaired hundreds of them in Westlake, St. Francis Heights, Broadmoor, and the blocks near Westmoor High. If the rust has hollowed the entire bottom rail, a new gate makes more sense, and we will tell you straight. The written quote includes our recommendation either way and the price you will pay is set before we start.
Two things usually. First, the concrete pad has settled over decades and the gate is no longer square to the post, so the latch side drags on the low end. Second, the hinge post is corroding at the base where fog moisture sits, compounding the misalignment. We often have to do both together: straighten the gate and replace the failing post base. Expect $380 to $640 for the full post-and-pad correction on a typical Daly City driveway. For a precise quote on your gate, call (828) 426-7081.
Yes. We repair and replace automatic gate operators all over Daly City, from residential swing operators to the commercial sliding operators on apartment complexes. We are factory-trained and authorized on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Daly City specifically, we see a lot of FAAC and BFT on European-style swing gates and a lot of LiftMaster on newer installations. We stock common control boards and transmitter parts locally. Board replacement typically runs $290 to $540. Call us and describe what your opener is doing, or not doing, and we will tell you realistically what it will cost to fix.
Galvanized posts instead of painted steel. Stainless hinges instead of zinc-plated. Marine-grade latches instead of standard hardware-store versions. And a good zinc-rich primer under the topcoat on any repaired weld. All of that costs slightly more up front, usually $30 to $90 more per side-yard gate, and it is the difference between a repair that lasts five years and one that fails again in three. We write that specification into every Daly City quote we give, because we know the fog is coming back tomorrow morning.
If your gate is sagging, seized, rusted, or the opener is dead, call Warden Gate Repair at (828) 426-7081. You will get a real person on the phone, a written price before we start, and a technician whose name and photo you know before the doorbell rings.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Daly City, CA.