Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Daly City, CA
Gate repair in Daly City usually costs between $180 and $1,400, with most common fixes landing in the $250 – $550 range. We’re Warden Gate Repair, and we focus exclusively on gates, electric gates, and gate motors across Daly City, from Westlake to the Westmoor hills. If your gate is rusted, dragging, or refusing to open, call (828) 426-7081 and we’ll give you a written price before any work starts.
What makes Daly City different comes down to three things: fog-driven rust, aging Doelger-era homes, and hillside lots. Each of our three main services has its own Daly City page so you can go straight to the details that matter to you.
Why Daly City Homes Are Different
Daly City sits under one of the most persistent marine layers in California. The near-constant coastal fog carries Pacific moisture that accelerates rust and corrosion on iron and steel gates far faster than anywhere inland on the peninsula. We regularly see gates in Westlake and Broadmoor with surface rust that has worked its way into hinges, latches, and frame tubing, seizing parts that would have lasted decades in a drier climate.
The housing stock compounds the issue. Thousands of Daly City homes were built by Doelger in a tight window from the late 1940s through the 1950s, and many still have their original ornamental iron side-yard and driveway gates. That means entire blocks are aging out at the same time, with gates of nearly identical vintage failing in nearly identical ways: rust at the bottom rail, stuck hinges, and latch tabs that no longer line up. Small, closely packed lots on narrow streets also mean most driveway gates here are the compact swing type, not the wide sliding gates you see further south.
Terrain adds a third layer. Much of Daly City was graded into steep coastal hillsides, so driveway gates frequently sit on significant cross-slopes. Settling concrete pads and poor drainage create a geometry problem where a gate that was square at installation now drags at the latch post or binds mid-swing. That is a repair we handle constantly in Daly City and far less often in flatter neighboring cities like South San Francisco or San Bruno.
Our Main Daly City Services
Most Daly City homeowners call us for one of three things: a gate that has stopped swinging properly, an electric opener that has quit, or a motor that makes noise but does not move the gate. Each service has its own detailed page below.
Gate Repair in Daly City
A rusted hinge or a gate that drags on sloped concrete is rarely a one-part fix. We inspect the full swing path, the post anchors, and the latch alignment before quoting anything, because on Daly City hillsides a dragging gate is usually a settling issue as much as a hardware issue. See the full breakdown of what we check and what it costs on our Gate Repair in Daly City page.

Electric Gate Repair in Daly City
Electric gate failures in Daly City divide roughly into power problems, control board failures, and safety sensor faults. Marine air is hard on exposed wiring and terminal connections, and we see a lot of corroded connectors and tripped breakers in the older Westlake and St. Francis Heights homes. Our Electric Gate Repair in Daly City page covers the diagnosis process, the safety checks, and the pricing.

Gate Motor Repair in Daly City
The gate motor, the box that slides or swings your gate automatically, takes the brunt of Daly City’s moisture. We replace and repair motors on nine major brands, and in this climate we pay particular attention to weather sealing and corrosion at the gearbox. For a full look at motor diagnostics, brand-specific parts availability, and what a replacement costs here, see our Gate Motor Repair in Daly City page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Daly City
We service FAAC, BFT, Linear, and Viking gate openers in Daly City, and we stock the common boards, arms, and safety parts locally for faster turnaround. See our brands page for the full list of nine manufacturers we carry and service.
Pricing for Gate Company in Daly City, CA
| Service | Typical range in Daly City |
|---|---|
| Gate hinge repair or replacement | $180 – $350 |
| Gate latch or lock replacement | $150 – $300 |
| Gate wheel or roller replacement | $180 – $320 |
| Gate sag repair and realignment | $220 – $450 |
| Electric gate system diagnostic | $95 – $180 |
| Gate opener circuit board replacement | $300 – $600 |
| Gate safety sensor repair or replacement | $180 – $350 |
| Gate motor replacement | $600 – $1,400 |
| Gate remote programming | $80 – $150 |
| Gate keypad installation | $200 – $400 |
Daly City pricing runs higher than inland cities because rust and slope correction add labor time. Every quote we give is a written price delivered before any work starts, covering parts, labor, and the exact scope, so the number we hand you is the number you pay.
Neighborhoods We Serve in Daly City
We cover the full city, and because Daly City is compact we can usually reach any neighborhood the same day for repair calls.
- Westlake
- Broadmoor
- St. Francis Heights
- Westmoor
- Serramonte
Service Area – Cities Near Daly City
If you’re just outside city limits, we also serve the neighboring communities on the Bay side and the coast, including Brisbane, CA, South San Francisco, CA, San Bruno, CA, and Pacifica, CA. Scheduling is coordinated from our Bay Area office, and crews dispatched to Daly City serve the surrounding area as well.
Serving Daly City, CA - Our Local Coverage Area
We’re based in the Daly City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Daly City
For repair calls, we can typically reach Daly City the same day. Our phone line is answered by a live person 24/7, so you’ll speak to a real dispatcher, not a voicemail, any time you call. Call (828) 426-7081 and we’ll give you a realistic arrival window on the spot.
Most gate repairs, including hinge, latch, and motor replacement, do not require a permit in Daly City. If your project involves a new gate installation or significant structural changes to a wall or post, we’ll tell you during the estimate whether a permit should be pulled, and we can advise on the process.
We serve all of Daly City, from Westlake and Broadmoor up to the Westmoor hills and across to Serramonte. There’s no extra charge for any neighborhood within city limits, and we do not route jobs through third-party subcontractors. The technician sent to your home is a Warden employee, background-checked and badged.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Daly City Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After