Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Bruno, CA
Gate repair in San Bruno means working on two very different kinds of equipment: heavy commercial slide gates near the airport that cycle hundreds of times a day, and aging residential gates on mid-century homes that have spent decades in persistent salt fog. Warden Gate Repair handles both. We’re a gate-and-opener specialist, not a general handyman service, and we focus exclusively on gate repair, electric gate repair, and gate motor repair. Our technicians arrive with a name, a photo, and a written price before any work starts. For a free estimate on any gate issue in San Bruno, call (828) 426-7081.
Why San Bruno Homes Are Different
San Bruno sits directly in the marine fog corridor that funnels off the bay. That near-daily salt moisture settles into gate hinges, rollers, tracks, latch assemblies, and control-board junction boxes, accelerating rust significantly faster than what you’d see in inland Peninsula cities like San Mateo. We regularly replace hinge pins and roller bearings in San Bruno that would have lasted another five to ten years just a few miles south. The wet-dry cycles are the real killer: they pull corrosion into wiring conduits and trick even well-installed control boards into false fault codes.
The housing stock compounds the issue. Much of San Bruno was built as post-WWII tract housing from the late 1940s through the 1960s, and a lot of those original wrought iron driveway gates and chain link fence gates are still in service, now out of plumb and deeply corroded. Crestmoor, rebuilt after the 2010 PG&E pipeline explosion, is different again: that concentrated pocket of 2011 to 2013 construction is now hitting its first major service window, with gate motors and operators reaching the end of their first working life all at roughly the same time. Warden Gate Repair stocks parts for both profiles, so a Crestmoor motor replacement and a hillside hinge rebuild both move in a single visit wherever possible.
Our Main San Bruno Services
San Bruno homeowners and businesses call most often about two things: a gate that won’t open reliably, and a motor or operator that stopped responding entirely. Each service has its own San Bruno page, linked below.
Gate Repair in San Bruno
Gate repair in San Bruno usually means correcting years of salt-air damage: corroded hinges, sagging posts, worn rollers, and latch assemblies that no longer close cleanly. The dense residential neighborhoods on the western hillsides see more than their share of fence-gate misalignment as wet soil shifts posts seasonally. We assess the frame, hardware, and alignment as one system before touching any part, so the repair holds rather than fails at the next weak point. Gate Repair in San Bruno covers what a typical repair includes and what it costs.
Electric Gate Repair in San Bruno
Electric gate repair in San Bruno frequently leads back to moisture in the control board or a safety sensor out of alignment from countless open-close cycles. Homes in the fog belt and businesses along Airport Boulevard and Bayshore put very different strain on gate electronics, and the fix is never one-size-fits-all. We carry diagnostics and repair parts for Linear, Viking, and DoorKing systems that are common across the city. For the full picture on diagnostics, safety edges, and loop detectors, see Electric Gate Repair in San Bruno.
Gate Motor Repair in San Bruno
Gate motor repair in San Bruno splits into two worlds: residential swing-gate motors that fail from corrosion and disuse, and heavy commercial slide-gate operators that wear out from hundreds of daily cycles at airport-service businesses. A Crestmoor gate motor from 2012 and a Bayshore logistics gate that runs constantly both need diagnosis, but the parts and the urgency differ. We stock common motor components and repair what’s repairable rather than defaulting to full replacement. For motor failure signs, costs, and turnaround, read Gate Motor Repair in San Bruno.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Bruno
We’re factory-trained and authorized on the brands San Bruno actually runs. You’ll see a lot of Linear openers on mid-century residential gates, Viking and DoorKing on commercial gates near the airport, and Ghost Controls on newer or retrofit installs. We keep common parts for these lines stocked locally, which shortens turnaround on most San Bruno motor and board repairs. See our brands for the full list.
Pricing for Gate Company in San Bruno, CA
San Bruno gate work prices below reflect the local market for a specialist with factory training and the Threshold Standard background check on every tech. Every price is written and agreed before we touch the gate.
| Service | Typical range in San Bruno |
|---|---|
| Gate repair service call | $89 – $149 |
| Hinge replacement | $120 – $300 |
| Gate frame alignment | $150 – $400 |
| Latch and lock repair | $80 – $220 |
| Roller replacement | $100 – $250 |
| Electric gate diagnostic | $95 – $165 |
| Control board replacement | $280 – $650 |
| Safety sensor replacement | $180 – $400 |
| Gate motor repair | $220 – $520 |
| Gate motor replacement | $650 – $1,400 |
Salt-air corrosion and out-of-plumb posts can push a San Bruno repair toward the higher end of any range, because freeing rusted hardware and correcting alignment takes real time. Whatever the number is, it’s on paper before work starts. No surprise line items at the end, ever.
Neighborhoods We Serve in San Bruno
We send technicians to every part of San Bruno, from the commercial corridors along Airport Boulevard and Bayshore to the residential hillsides further west. Typical response is same-day or next-day for repair calls, and we keep the appointment window short because you’ll know exactly who’s coming before they arrive.
- Crestmoor
- Mills Park
- Portola Highlands
- Rollingwood
- Downtown San Bruno
Service Area – Cities Near San Bruno
We do most of our work in San Bruno itself, but the service area also covers the surrounding Peninsula. We regularly send technicians to Millbrae, CA, South San Francisco, CA, Pacifica, CA, and Brisbane, CA. Dispatch is coordinated from the San Francisco Bay Area office, so scheduling works the same no matter which side of the line you’re on.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bruno
For most San Bruno repair calls, we can have a technician at your gate same-day or next-day. Calls are answered by a live person 24/7, so you’ll get a real answer about timing, not a voicemail. Call (828) 426-7081 and we’ll tell you when someone can be there.
Most direct motor-for-motor swaps and repairs do not require a permit in San Bruno. New gate installations or significant electrical work can trigger a permit requirement, and HOAs in some San Bruno neighborhoods add their own approval layer. We’ll tell you what applies to your specific job before work starts.
Yes. A large share of our San Bruno work is commercial: slide gates at logistics yards, parking facilities, and airport-service businesses along Airport Boulevard and Bayshore. Those gates log hundreds of cycles a day, and we stock the parts and technical resources to match that duty cycle. Call for a service-contract conversation and a written quote.
Yes. Before any Warden Gate Repair visit in San Bruno, you receive the technician’s name and photo. When they arrive, they show a photo ID badge at the door. That’s the Threshold Standard, enforced on every visit. If the repair isn’t right, the 365-Day Done Right Promise includes a free return visit.
For a free estimate on any gate, opener, or motor issue in San Bruno, call Warden Gate Repair at (828) 426-7081. You’ll know who’s coming and exactly what it costs before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bruno Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.