Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hornsby Bend, TX
Gate repair in Hornsby Bend means working on ranch-style welded pipe and tube-steel gates that have spent decades keeping livestock in and the Colorado River’s floodwaters out. The work here is different from the ornamental iron and automated residential gates you see in Austin’s newer suburbs. We’re Warden Gate Repair, and we send a named, background-checked technician with a written price before any work begins, every single time. If your gate won’t swing, your opener won’t respond, or your post has heaved out of plumb, call us at (828) 426-7081 and talk to a live person right now.
Why Hornsby Bend Homes Are Different
Hornsby Bend sits on the Colorado River’s alluvial bottomlands in eastern Travis County, and that location shapes nearly every repair call we take here. The soil is deep, moisture-sensitive clay that expands after spring rains and shrinks hard during August drought. Gate posts anchored in that clay heave, tilt, and shift out of plumb from season to season. A gate that swings cleanly in May can be completely bound at the latch by late summer, not because the hinges failed but because the post moved.
The housing stock across Hornsby Bend is mostly older farmsteads, rural acreage properties, and manufactured homes on large lots, with newer rural-residential parcels filling in as Austin’s growth pushes east. Nearly every parcel has a driveway gate and perimeter fencing for livestock control, equipment security, or privacy. Many of those working ranch gates were welded onto pipe posts in the 1970s and 1980s. Decades of occasional Colorado River backwater flooding have rusted the hinge collar welds on a lot of them. When those welds finally let go, the repair is a full post-pull-and-reset with a welder on site, not a hinge swap from the hardware store. That is the kind of job most suburban gate companies are not set up to handle. We carry welding capability and agricultural hardware familiarity because Hornsby Bend demands it.
Our Main Hornsby Bend Services
The two gate problems Hornsby Bend homeowners call us about most are gates that will not open or close properly and electric openers that have quit entirely. Each service has its own Hornsby Bend page with full pricing, local conditions, and what to expect.
Gate Repair in Hornsby Bend
We repair welded pipe and tube-steel gates on ranch parcels, farmsteads, and rural residential properties throughout the Hornsby Bend corridor. Most calls start as a sagging or bound-up gate and turn into hinge rewelds, post resets, or latch realignment once we see what the clay soil has done to the post. We arrive with a welder, agricultural-grade hinges, and the heavy hardware these old ranch gates were built with. Written price before any work starts, guaranteed in writing for 365 days. Gate Repair in Hornsby Bend
Electric Gate Repair in Hornsby Bend
Electric gate openers on Hornsby Bend acreage properties take a beating from dust, flood humidity, and long daily cycles from livestock and equipment traffic. We troubleshoot the full system: power supply, control board, safety edges, photo eyes, and the operator arm or slide track. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, and we bring the right parts on the first trip. Electric Gate Repair in Hornsby Bend
Gate Motor Repair in Hornsby Bend
The gate motor, the box that slides or swings your gate automatically, is the single most common failure point on automated Hornsby Bend gates. Dust from unpaved ranch roads, intense summer heat, and power surges from rural electrical service all shorten motor life. We diagnose whether the motor, the capacitor, the limit switches, or the control board is at fault, then quote the repair in writing before we touch anything. Gate Motor Repair in Hornsby Bend
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hornsby Bend
We are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. Our Hornsby Bend trucks carry common Linear, Viking, and DoorKing parts so most motor and opener repairs are completed in a single visit. See our brands for the full list and what we stock.
Pricing for Gate Company in Hornsby Bend, TX
| Service | Typical range in Hornsby Bend |
|---|---|
| Hinge rewelding on a ranch pipe gate | $180 – $340 |
| Post pull-and-reset (single post, clay soil) | $400 – $800 |
| Gate sag correction with new hinge hardware | $220 – $450 |
| Latch and catch replacement | $120 – $250 |
| Full gate frame straightening | $350 – $700 |
| Electric opener diagnostic visit | $95 – $150 |
| Control board replacement | $250 – $500 |
| Gate motor replacement | $450 – $900 |
| Safety edge and photo eye replacement | $180 – $350 |
| Operator arm or slide track rebuild | $300 – $650 |
What pushes a Hornsby Bend price toward the top of these ranges is usually the post condition, not the gate itself. When the clay soil has heaved a post out of plumb by several inches, a simple hinge repair becomes a dig-out, reset, and re-concrete job. Whatever the number, you get it in writing before any work starts, with no surprise line items at the end. Call (828) 426-7081 for a free estimate.
Neighborhoods We Serve in Hornsby Bend
We cover the full Hornsby Bend area, from the Colorado River bottomlands up through the rural acreage parcels east toward Webberville Road. Typical response time for the area is same-day or next-morning, depending on when you call.
- Hornsby Bend river bottoms
- Webberville Road corridor
- East Travis County acreage parcels
- Rural parcels near the Colorado River Wildlife Sanctuary
- Manufactured home communities on large lots
Service Area – Cities Near Hornsby Bend
While this page covers Hornsby Bend, our gate repair crews also serve nearby Texas metros including Houston, TX, Dallas, TX, and Fort Worth, TX. We also have coverage in San Antonio, FL for Florida customers. Dispatch for Hornsby Bend jobs is coordinated from our Austin office, with local crews serving this area directly.
Serving Hornsby Bend, TX - Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hornsby Bend
Most Hornsby Bend calls are scheduled same-day or next-morning. We answer the phone live 24 hours a day, seven days a week, so when you call, a real person confirms the scheduling window and tells you which technician is coming, by name. Call (828) 426-7081 to check availability for your street.
For most gate repairs on existing posts, no permit is required in the Hornsby Bend area of eastern Travis County. Larger projects like new driveway gate installations or significant electrical work for a new opener may require a county permit, and we will tell you upfront if your job does. No permit surprises after the work is done.
Make sure the gate area is clear of livestock, equipment, and vehicles so we can work safely. We send the technician’s name and photo before arrival, and they will show a photo ID badge at your door. The written price is given before any work starts, so there is nothing to decide on the spot except a yes or a no.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hornsby Bend Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.