Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Krum, TX
We’re the gate company Krum homeowners call when a driveway gate stops opening, drags against the ground, or slams because a post has shifted. Krum isn’t a cookie-cutter subdivision market. It’s rural acreage, long caliche driveways, and ranch-style pipe gates built to hold livestock in and keep the outside out. The Blackland Prairie clay under much of this area expands and contracts hard with every rain and drought cycle, which means gate posts move, hinges bind, and openers burn out faster than they do in town. Call (828) 426-7081 and you’ll get a live person, a real diagnosis, and a written price before we touch a bolt.
Why Krum Homes Are Different
Most Krum properties sit on 2 to 20 acre lots with ranch homesteads, custom acreage builds, or manufactured homes set back from the road. The driveway gates on these places are almost never light aluminum subdivision models. They’re tubular steel and pipe-frame swing or slide gates, often installed by the original property owner with whatever post depth felt right that weekend. That matters because the clay soil here doesn’t hold still. Through a dry summer, dessicated clay contracts and drops away from the post, letting it lean and rotate. Then a hard rain hits and the ground swells right back, pinching the gate leaves against each other. We see this cycle every year in Krum, and it’s why a “hinge repair” is frequently the wrong fix. The post itself has moved, and until it’s re-plumbed and re-footed, the gate will keep binding within months.
The February 2021 freeze knocked out a lot of opener boards in this part of Denton County too, because so many rural gate motors were wired without surge protection. If you live out near the Krum city limits or down a county road, you’ve probably learned how long a gate can sit dead before anyone notices. That’s exactly the kind of job we handle most weeks.
Our Main Krum Services
Three service lines keep almost every Krum gate running. Here’s what each one actually involves around here.
Gate Repair in Krum
A leaning post, a snapped weld, a gate that drags by August after working fine in April. That’s the typical Gate Repair in Krum call, and it usually traces back to the clay. We re-plumb the post, reset it in proper concrete, re-align hinges, and re-hang the leaf so it swings true again. When a weld fails on a pipe gate, we grind it clean and re-weld it, then check the opposite side for fatigue. We carry steel stock and hinge sets so most jobs finish same visit.
Electric Gate Repair in Krum
When a gate has power but won’t respond, or opens halfway and reverses, the problem is usually in the wiring harness, the safety edges, the keypad, or the control board. Electric Gate Repair in Krum starts with a point-by-point test of line voltage, transformer output, and low-voltage accessories. Rural properties here often have long wire runs from house to gate, and undersized conductors are common. We’ll trace the issue before quoting, so you’re never paying for guesswork.
Gate Motor Repair in Krum
The gate motor (the box that slides or swings your gate automatically) takes the hardest beating on any Krum property. Heat, rain, dust, and power surges all work against it. Gate Motor Repair in Krum covers burned contactors, stripped gears, failed capacitors, and limit switches knocked out of calibration. We service swing arm motors and slide gate operators, replace boards and capacitors on site, and keep a range of common parts on the truck. If the motor is beyond repair, we quote a replacement with the exact model and a written install price.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Krum
We’re factory trained on the brands we see most on Krum acreage: FAAC swing arm operators, BFT slide gate motors, Linear systems, and Viking. Parts for these are stocked on our service vehicles, so a bad board or stripped gear doesn’t mean waiting a week. See our brands for the full list and what we carry.
Pricing for Gate Company in Krum, TX
Krum prices track the work, not a sales sheet. Here’s what most jobs land at before any parts.
| Service | Typical range in Krum |
|---|---|
| Gate post reset (re-plumb and re-foot) | $185 – $390 per post |
| Hinge realignment and re-hang | $140 – $285 per leaf |
| Weld repair on pipe or tube frame | $110 – $220 per break |
| Opener diagnostic (no parts included) | $95 – $175 |
| Control board replacement | $220 – $485 |
| Capacitor or relay replacement | $130 – $240 |
| Safety edge replacement (per edge) | $120 – $240 |
| Keypad or receiver replacement | $115 – $230 |
| Gate motor replacement (parts + labor) | $640 – $1,475 |
| Full swing gate overhaul (posts, hinges, motor) | $950 – $2,800 |
What pushes a Krum quote higher? Long gravel driveways that hide conduit, posts set in four feet of clay that need deeper footings, and gates that were welded with thinner pipe than the job needed. Whatever the number, you get it in writing before work starts. No surprise line items at the end.
Neighborhoods We Serve in Krum
We run calls all over Krum and the surrounding acreage. Most of our work is on county roads and rural lots rather than tract subdivisions, and we’re familiar with the long driveways and set-back gates that come with them.
- Downtown Krum and the older lots near McCart Street
- Properties along FM 1173 and surrounding county roads
- Acreage east of I-35 between Krum and Sanger
- Rural homesteads west of town toward Bolivar
- Newer custom-home lots on the north and east edges of Krum
Typical response for Krum is same day or next morning, depending on when you call and how far out you are.
Service Area – Cities Near Krum
Krum is our focus, but we regularly serve Sanger, TX just to the east, Denton, TX to the south, and the acreage communities around Argyle, TX and Aubrey, TX. If your property is anywhere in north Denton County, call and we’ll tell you straight whether we can get a tech to you.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Krum
Most Krum calls are reached same day or the next morning. If your gate is stuck open or won’t close and you need it secured, tell the live person on the phone and we’ll prioritize it. Call (828) 426-7081 and you’ll know a time window before you hang up.
For most repairs and like-for-like replacements, no. New gate installations or major electrical runs may require checking with the City of Krum or Denton County depending on your property’s jurisdiction. We’ll tell you honestly what applies to your job and handle the work accordingly.
Every repair is guaranteed in writing. If the fix doesn’t hold, you get a free return visit to make it right. That promise covers our workmanship for a full year, and it’s not pro-rated or qualified away. Call (828) 426-7081 for a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Krum Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.