Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Travis Ranch, TX
Gate repair in Travis Ranch, TX usually costs between $145 and $625 depending on what failed. Most jobs here are done the same day we hear from you, because gate problems in a master-planned community are not something you can put off. Travis Ranch gates sit on Kaufman County black clay, and that soil moves more than most people expect. The result is a specific pattern of gate failures we see throughout the neighborhood, from leaning posts to hinges that bind. Call (828) 426-7081 when your gate stops working correctly and you’ll get a written price before any work begins.
Why Travis Ranch Homes Are Different
Travis Ranch was built mostly between the mid-2000s and the 2020s, with ornamental wrought iron and powder-coated steel gates matched to HOA color palettes. Those gates look sharp, but the ground under them is the real story. Kaufman County’s expand-and-contract black clay heaves with every wet season and shrinks hard during drought, so posts that were plumb a year ago are suddenly leaning and the gate drags on the driveway or won’t latch. The February 2021 ice storm did its own damage too: automated gate arms snapped and lighter steel components warped under sudden freeze loads.
The HOA layer matters here as much as the soil. Travis Ranch has an architectural review board that requires pre-approval for any gate panel or picket replacement that changes the outward appearance. That means we quote jobs with the community’s approved finish codes in hand before ordering a single part. Otherwise a homeowner can end up with a correctly repaired gate and an HOA violation letter the same week. Alignment realignment and HOA-compliant part sourcing are the two constants on nearly every Travis Ranch job we take.
Our Main Travis Ranch Services
The two calls Travis Ranch homeowners make most often are for gates that won’t open or close correctly and for the motor that is supposed to do the work but has stopped responding.
Gate Repair in Travis Ranch
Most Travis Ranch gate repairs start with a post that has moved out of plumb or a hinge that has begun to bind against the shifting clay. We realign the post, re-hang the gate, and match any replacement picket or panel to the HOA-approved finish so the repair stays invisible to the architectural review board. If your gate scrapes, sags, or won’t latch, that’s the conversation to have. Learn more on our Gate Repair in Travis Ranch page.
Electric Gate Repair in Travis Ranch
Electric gate issues in Travis Ranch often show up after a hard rain, when ground movement puts extra stress on sensors, safety edges, and wiring runs. We test the full circuit, replace damaged components, and set the travel limits so the gate closes fully without slamming. Severe ice events have also left their mark on exposed arms and brackets around the neighborhood. For the details on how we handle those calls, see Electric Gate Repair in Travis Ranch.
Gate Motor Repair in Travis Ranch
The gate motor, which is the box that slides or swings your gate automatically, works against more resistance in Travis Ranch than it would on stable ground elsewhere. When the motor strains daily against a shifting gate, capacitors and gears wear faster. We diagnose whether the motor itself has failed or is working overtime against a mechanical problem. Either way, you’ll know the exact fix and price before we touch it. Read about Gate Motor Repair in Travis Ranch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Travis Ranch
We service FAAC, BFT, and Viking operators regularly in Travis Ranch, along with Linear control boards and receivers. We keep common control boards and limit switches in local stock, which shortens most repairs to a single visit. Full details are on our brands page.
Pricing for Gate Company in Travis Ranch, TX
| Service | Typical range in Travis Ranch |
|---|---|
| Gate realignment (re-hang and set) | $145 – $275 |
| Hinge replacement, heavy ornamental gate | $165 – $310 per hinge |
| Gate post reset / reinforcement | $280 – $520 |
| Weld repair, ornamental iron gate | $145 – $325 |
| Gate wheel / truck replacement | $125 – $245 |
| Control board replacement | $240 – $475 |
| Gate opener motor replacement | $325 – $625 |
| Safety sensor or photo eye replacement | $95 – $185 per pair |
| Keypad / entry system replacement | $160 – $320 |
| Service call and diagnosis | $59 – $149 |
Prices in Travis Ranch run toward the higher end of these ranges when soil movement has pulled a post far enough that resetting it requires deeper concrete work. HOA-approved finish matching can also add a modest parts cost. Whatever the number is, you see it in writing before we start, and that price is exactly what you pay.
Neighborhoods We Serve in Travis Ranch
We work throughout Travis Ranch and the surrounding Kaufman County corridors, including the sections built in different phases over the last two decades. Response time across the community is typically same day when called before mid-afternoon.
- Travis Ranch Phases 1 – 4
- The Preserve at Travis Ranch
- Creekside at Travis Ranch
- Travis Ranch Estates
- Bent Creek Trails
Service Area – Cities Near Travis Ranch
While this page focuses on Travis Ranch, our crews also cover nearby communities across the metro. You can read about our work in Dallas, TX and Fort Worth, TX, or farther out in Houston, TX and San Antonio, FL. If your gate sits in one of those areas, the same written-price promise and 365-Day Done Right Promise apply.
Serving Travis Ranch, TX - Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Travis Ranch
Same day in most cases when you call before mid-afternoon. We coordinate scheduling from the Dallas-Fort Worth office and dispatch local crews into Travis Ranch daily. You’ll always get a live person on the phone, day or night.
They can, when a visible panel or picket needs replacing. The architectural review board requires pre-approval for changes to outward appearance, so we match the original approved finish and source from the community’s approved vendor list before ordering parts. Most mechanical and motor repairs need no HOA involvement.
Yes. Every Travis Ranch job gets a written price before any work begins, with no surprise line items at the end. That price is part of the 365-Day Done Right Promise: if the repair isn’t right, we come back and make it right at no cost. Call (828) 426-7081 for a free estimate and a written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Travis Ranch Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.