Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Wells Branch, TX
Gate repair in Wells Branch usually costs between $180 and $340 for a spring, hinge, or latch fix, and $450 to $900 when a gate motor or control board is involved. What makes Wells Branch different is the housing stock itself: nearly every home here was built in the 1980s, which means the wrought iron driveway gates, cedar fence gates, and automated openers are all 35 to 40 years old and failing around the same time. We’re Warden Gate Repair, and we send a named, photo-badged technician with a written price before any work starts. Call (828) 426-7081 for a free estimate.
Why Wells Branch Homes Are Different
The gates in Wells Branch weren’t installed one at a time over decades. The neighborhood was master-planned and built almost entirely in the 1980s, so thousands of homes received similar gate and fence hardware within the same few years. That hardware is now aging as a single cohort. A hinge that lasted 35 years on one street is failing on the next street over at the same time, which is why we see concentrated waves of gate failures here rather than the scattered calls you’d get in a mixed-vintage city.
The soil adds a second layer. Wells Branch sits on the shrink-swell clay common across north Travis County. When the ground wets and dries through the year, fence posts heave and lean, which racks gate frames, throws latches out of alignment, and pulls hinges loose. A repair that only replaces the hardware without addressing the post footing will return, sometimes within a single wet-dry season. We account for that on every Wells Branch job.
There’s also the Municipal Utility District. Wells Branch has community standards oversight, so street-facing gate replacements often need material and finish approval before work begins. That’s a delay someone working out of unincorporated surrounding areas may not anticipate. We factor it into every quote so there are no surprises mid-job.
Our Main Wells Branch Services
Most Wells Branch homeowners call us for one of three things: a gate that won’t swing or slide properly, a gate with electrical or automation components that isn’t responding, or the motor itself giving out. Each has its own page with local details and pricing.
Gate Repair in Wells Branch
A leaning or dragging gate in Wells Branch is rarely just a hinge problem. The clay soil movement underneath means frames shift seasonally, so we check the post footings and the frame alignment before replacing any hardware. Whether it’s a sagging wrought iron driveway gate or a cedar privacy gate that won’t latch, we diagnose the root cause and quote a written price before touching anything. See Gate Repair in Wells Branch for the full breakdown.
Electric Gate Repair in Wells Branch
Electric gates here deal with two enemies at once: aging 1980s wiring and the same soil movement that stresses every mechanical part. When a gate stops responding to a remote or keypad, the issue can be a photo eye, a limit switch, a control board, or a wiring connection that’s been pulled loose by a shifting post. We carry parts for the major brands and test the full system, not just the symptom. Read more on Electric Gate Repair in Wells Branch.
Gate Motor Repair in Wells Branch
The gate motor, the box that slides or swings your gate automatically, is the component we replace most often in Wells Branch. Most original motors in this neighborhood are reaching the end of their service life, and the added strain from misaligned frames shortens what’s left. We stock or can quickly source motors for Linear, Viking, Ghost Controls, DoorKing, and other major brands, and we quote the full replacement cost before ordering anything. Details are on Gate Motor Repair in Wells Branch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Wells Branch
We’re factory-trained on the brands Wells Branch homes actually have installed: Linear, Viking, Ghost Controls, DoorKing, and more through our brands. Common replacement parts are stocked in our Austin-based inventory, so a repair doesn’t have to wait on a distributor shipment. If the part is rare, we tell you the lead time before you commit.
Pricing for Gate Company in Wells Branch, TX
| Service | Typical range in Wells Branch |
|---|---|
| Gate spring repair | $180 – $340 |
| Gate hinge repair | $180 – $340 |
| Gate latch repair | $180 – $340 |
| Track alignment | $180 – $340 |
| Remote/programming repair | $150 – $450 |
| Gate motor replacement | $450 – $900 |
| Control board repair | $450 – $900 |
| Photo eye sensor repair | $150 – $450 |
| Welded gate repair (per section) | $340 – $1,200 |
| Full gate system check | $280 – $600 |
What pushes a Wells Branch quote toward the top of these ranges is the soil-related post work: if a post has heaved badly enough to need re-setting or deeper footings, that labor adds to the base hardware cost. Whatever the number is, you’ll see it in writing before any work starts, and that written price is the price you pay. No line items appear at the end that weren’t there at the beginning.
Neighborhoods We Serve in Wells Branch
We cover the full Wells Branch MUD boundary and the surrounding north Travis County pockets that share the same 1980s housing stock. Our technicians are typically on site within a few hours for emergency repair calls in this area.
- Wells Branch MUD core
- Northwest Wells Branch
- Southeast Wells Branch near Shoreline Drive
- Wells Branch Parkway corridor
- Katherine Fleischer Park area
Service Area – Cities Near Wells Branch
Our Austin-based dispatch serves Wells Branch and the wider Texas market. If you’re outside Wells Branch but nearby, we also cover Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. Scheduling is coordinated from our Austin office, and crews serve Wells Branch locally.
Serving Wells Branch, TX - Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wells Branch
For urgent repairs like a gate stuck open or a motor that won’t respond, we can usually have a technician in Wells Branch within a few hours. Call (828) 426-7081 and a live person answers 24/7.
Yes, in many cases. Street-facing or front-yard gate replacements in Wells Branch often require material and finish approval through the Municipal Utility District’s community standards process. We identify when approval applies and make sure the quote accounts for the approval timeline before any work starts.
Yes. We schedule Wells Branch appointments around when works for you, and we confirm the technician’s name and photo before arrival. Estimates are free, and the written price is locked before any parts are ordered or labor begins. Call (828) 426-7081 to set a time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wells Branch Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.