Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Haltom City, TX
Warden Gate Repair is the gate company Haltom City homeowners call when a gate post has leaned out of plumb, a hinge plate has torn loose from an alley gate, or an opener has stopped responding. Our crews work on the city’s older chain-link, ornamental iron, and wood privacy gates every week, and we know what Tarrant County clay does to them. Call (828) 426-7081 and you’ll get a live person, a written price before any work starts, and the name and photo of your technician before they arrive.
Why Haltom City Homes Are Different
Most of Haltom City’s housing stock was built between the 1950s and 1970s, and a large share of those homes sit on Blackland Prairie clay. That soil swells hard after heavy rain and shrinks deep during drought, and the cycle never really stops. Gate posts set in that clay get pushed out of vertical a little more each year. We see the result constantly: swing gates that drag on the latch side, slide gates that bind halfway across the track, and hinges that have pulled their screws loose from decades of soil movement.
Winter ice storms add a second, faster failure mode. When ice loads up an ornamental iron gate, the added weight snaps hinge plates and bends top rails before the post can fail. Chain-link gates in the older alley-fed neighborhoods take a different beating: garbage trucks and utility vehicles clip them on tight turns, and the hinge plates on those back-alley gates are among the most common single repair tickets we run in this city. The older no-HOA lots also mean every gate is different – different steel, different post depth, different opener wiring – so we quote each one individually after looking at it.
Our Main Haltom City Services
These three services cover nearly every gate call we run in Haltom City, each with its own dedicated page for the details.
Gate Repair in Haltom City
Most Haltom City gate repair calls start the same way: a gate that used to swing or slide cleanly now catches, drags, or won’t latch. On this city’s clay soil, that usually means a post has moved and the gate needs to be unbolted, the post re-set and plumbed, and the gate re-hung so it clears its catch again. We also replace hinge plates, cut and re-weld bent rails, and repair alley gates that have been clipped by garbage trucks. Every repair gets a written price before we touch anything. Gate Repair in Haltom City

Electric Gate Repair in Haltom City
Electric gate calls in Haltom City tend to involve openers that have been working off-and-on for a while before they finally quit. The soil movement that tilts posts also puts steady pressure on actuator arms, safety edges, and photocells, so an opener that was aligned in a dry summer can be fighting its own gate by spring. We troubleshoot the full run: board, wiring, sensors, safety edges, and the actuator or arm, then quote the repair in writing before we replace anything. Electric Gate Repair in Haltom City

Gate Motor Repair in Haltom City
When a gate motor (the box that slides or swings your gate automatically) fails in Haltom City, the cause is often years of extra load from a binding gate. A motor that has been straining against a tilted post or a dragging wheel burns out faster than one running free, which is why we check the gate’s mechanical alignment on every motor call, not just the motor itself. We service motors across the major brands we carry and give you the exact price to repair or replace before the work begins. Gate Motor Repair in Haltom City

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haltom City
We service and stock parts for Viking, Ghost Controls, DoorKing, and Elite, among the gate and opener brands we’re factory-trained on. Most common parts are on the truck for same-visit repairs. See our brands for the full list.
Pricing for Gate Company in Haltom City, TX
| Service | Typical range in Haltom City |
|---|---|
| Gate post reset and realignment | $350 – $800 |
| Hinge plate replacement (alley or driveway gate) | $180 – $420 |
| Swing gate re-hang and adjustment | $250 – $550 |
| Gate motor replacement (standard swing) | $900 – $1,800 |
| Gate motor repair (board, capacitor, or limit switch) | $250 – $650 |
| Safety edge or photocell replacement | $150 – $350 |
| Slide gate roller and track repair | $300 – $700 |
| Full electric gate system diagnostic | $120 – $250 |
| Chain-link gate frame repair or section replacement | $200 – $500 |
The two things that push a Haltom City quote toward the top of these ranges are post depth and concrete work. Older posts set shallow in clay often need a deeper re-set with new concrete, and alley gates with repeated truck strikes sometimes need the post replaced outright, not just straightened. Whatever the number, it’s written down and agreed before we start, and it doesn’t change at the end.
Neighborhoods We Serve in Haltom City
We run calls across Haltom City’s older grid-pattern neighborhoods and the newer pockets along the edges, with most jobs reached same-day or next-day depending on when you call.
- North Haltom City
- Eastside Haltom City
- Central Haltom City
- South Haltom City
- West Haltom City near the Fort Worth line
Service Area – Cities Near Haltom City
Our crews also cover the surrounding Tarrant County cities. If you’re in Fort Worth, TX, North Richland Hills, TX, Hurst, TX, or Bedford, TX, we can schedule the same written-price, photo-badged service we run in Haltom City.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haltom City
Most Haltom City jobs are reached same-day or next-day when you call (828) 426-7081. Emergency calls are answered by a live person 24/7, and we’ll give you a straight answer on timing when you call.
For most residential gate repairs and like-for-like motor replacements, no permit is required in Haltom City. New driveway gate installations with new electrical runs can trigger a permit depending on scope. We can tell you what applies to your specific job when we quote it.
Yes. We work the whole city, including the older grid blocks with rear service alleys and alley-access gates. Those back-alley gates are some of the most repair-prone in the Metroplex, and we run hinge and post calls on them every week.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After