Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Aldine, TX
Aldine’s gate work is different from what most Houston-area companies are used to. The mix of 1960s and 1980s ranch homes, heavy clay soil, and a steady rhythm of bayou flooding means gates here don’t fail the way they do in Katy or The Woodlands. Warden Gate Repair handles it with a simple process: a tech’s name and photo sent before arrival, a written price agreed before work starts, and a 365-day guarantee. Call (828) 426-7081 and a real person answers, day or night.
Why Aldine Homes Are Different
Most Aldine residential gates weren’t part of the original build. They’re aftermarket additions bolted onto fence posts built in the 1960s, 70s, and 80s, posts that were never engineered to carry a swinging steel gate. We see post lean, hinge pull-out, and headers that were undersized from day one. The soil underneath makes it worse. Aldine sits on expansive Houston black clay that heaves and shrinks with every rain-dry cycle, so a gate that was perfectly level in May can be dragging by September. No one in Aldine with a swing gate escapes this; it’s a question of when, not if, realignment is needed.
Then there’s the water. Properties near Greens Bayou and its feeder channels sit low enough that high-water events regularly put gate operators under standing water. We don’t treat waterproofed or elevated operator installs as an upsell in Aldine. We quote them as standard practice because we’ve pulled too many seized motor gears and corroded logic boards out of flooded operators here to pretend otherwise.
Our Main Aldine Services
Aldine homeowners and businesses call on us most often for two things: mechanical repairs to the gate itself, and repairs to the electric and motor systems that move it.
Gate Repair in Aldine
A sagging or dragging gate is the most common call in Aldine, and it’s usually the post, not the hinge. Aftermarket gates bolted to original fence posts pull those posts out of plumb over time, especially in heaving clay. We cut out failed posts, set new ones in concrete at proper depth, re-hang the gate square, and align the striker so it latches cleanly. Broken hinges, bent frames from vehicle strikes, and rusted welds on older steel gates are all routine here. Gate Repair in Aldine covers the full scope, from minor hinge replacement to a complete gate re-set.
Electric Gate Repair in Aldine
When a gate stops opening on command, the fault is usually in the electrical chain: a dead capacitor, a shorted control board, a bad photo eye, or a wiring run chewed by rodents. In Aldine, water intrusion adds a layer most electricians never see. Control boards here corrode faster, and we regularly diagnose boards that died after a single flood event near the bayou. The fix often involves replacing the board and relocating it higher inside the operator housing. Electric Gate Repair in Aldine walks through the full troubleshooting scope and what failures we see most.
Gate Motor Repair in Aldine
The motor, the box that slides or swings your gate automatically, is the hardest-working component on any Aldine gate. Commercial slide operators along the Hardy Toll Road corridor run dozens of cycles a day under semi-truck traffic, while residential motors contend with clay-induced misalignment that makes them push harder than they were designed to. We rebuild and replace motors from FAAC, BFT, Linear, and Viking, and we quote the full job, parts and labor, before turning the first screw. Gate Motor Repair in Aldine has the full brand coverage and pricing detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aldine
We’re factory-trained on gate and opener systems from FAAC, BFT, Linear, and Viking, among others, and we keep the fastest-moving control boards, remotes, and capacitors on the truck. That means many Aldine repairs are completed same-day with no return trip for parts. For full brand coverage, see our brands.
Pricing for Gate Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate repair (diagnostic trip + minor repair) | $180 – $340 |
| Electric gate repair (board, sensor, or wiring) | $220 – $450 |
| Gate motor replacement | $500 – $1,200 |
| Post reset and re-hang | $400 – $900 |
| Hinge replacement | $150 – $350 |
| Control board replacement | $250 – $600 |
| Photo eye or safety sensor replacement | $120 – $250 |
| Flood-damage motor rebuild | $350 – $800 |
| Heavy-duty slide gate service (commercial) | $500 – $1,500 |
Two things push Aldine prices toward the upper end of those ranges: clay-induced post movement that requires concrete work, and flood-related corrosion inside operators. Water damage is so common here that we quote elevated or waterproofed operator mounts as standard practice on new installs near the bayou. Whatever the number, it’s written down and agreed before we start. No line items added at the end, ever.
Neighborhoods We Serve in Aldine
We work the full stretch of Aldine, from residential blocks south of the beltway to commercial yards along Hardy Toll Road and US-59. Response times here run fast, usually same-day for emergency gate failures and next-morning for scheduled work.
- East Aldine
- Westfield
- Greenwood Village
- Northgate
- Hardy Toll Road corridor
Service Area – Cities Near Aldine
While this page covers Aldine, our crews also cover the surrounding metro. If you’re in Houston, TX, Dallas, TX, or Fort Worth, TX, we have comparable coverage there. For Florida readers, see San Antonio, FL. Each area has its own local pricing and condition notes.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aldine
For a gate that won’t close or won’t open at all, we typically arrive same-day. Aldine sits inside our core dispatch zone, and the tech’s name and photo are sent to your phone before arrival so you know exactly who’s at the door. Call 24/7.
Most repairs and replacements don’t require a permit in unincorporated Harris County, but any new electrical run or substantial concrete work may trigger a code review. We’ll tell you on the estimate call whether yours does, and we handle the paperwork if needed.
Yes. Aldine’s distribution yards and trucking terminals run heavy-duty slide gates through daily semi traffic, and we service those units regularly – motors, racks, safety edges, and controls. Commercial work gets the same written-price-before-work rule and the same 365-Day Done Right Promise as residential.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.