Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Yonkers, NY
Warden Gate Repair is the gate company Yonkers homeowners call when a gate won’t swing, won’t slide, or won’t open at all. Most of our work here involves restoring the original iron gates on pre-war row houses south of Cross County Parkway, or fixing driveway gates on the steep terrain west of the Saw Mill River Parkway. If your gate is stuck or sagging, call (828) 426-7081 and we’ll send a technician with a name, a photo, and a written price before any work begins.
Why Yonkers Homes Are Different
Southern Yonkers is packed with attached row houses and multi-family brick buildings from the 1890s through the 1930s. A lot of those homes still have their original cast-iron and wrought-iron entry gates, and many have never been replaced. That means restoration work: welding cracked scrollwork, rebuilding hinges worn thin after a century of use, fabricating replacement pickets to match the original pattern. It’s a different job than a panel swap on a 1990s aluminum gate.
The terrain changes the work too. Yonkers rises steeply from the Hudson River, and the streets in Nodine Hill and Park Hill are genuinely steep. Swing gates installed on those grades routinely bind or drag because the arc clearance was never engineered for the slope. Before we quote a “broken gate” job in those neighborhoods, we check driveway pitch. Often the fix is hinge relocation, not new hardware at all.
Winter is hard on gates here. Road salt gets kicked up onto gate posts, hinges, and latches all season, and the freeze-thaw cycle cracks welds and seizes pivot pins. February through April, the most common call we get is a gate that won’t latch or a hinge that snapped after a thaw. In Yonkers, post-winter hinge and latch failures are the dominant service call, and we plan parts inventory around that reality.
Our Main Yonkers Services
The two jobs Yonkers homeowners call about most are a gate that’s physically broken and a gate motor that stopped responding. Here’s how each one works with us:
Gate Repair in Yonkers
A sagging iron gate on a 1920s row house in Park Hill needs a different approach than a chain-link driveway gate in Crestwood. We weld, rebuild hinges, straighten frames, and replace rotted posts. On sloped driveways, we check the gate’s arc clearance before anything else, because that’s often the real problem. Gate Repair in Yonkers covers the full scope. Written price first, every time.
Electric Gate Repair in Yonkers
An electric gate adds a motor and a control board to everything mechanical. In Yonkers, salt corrosion on wiring and limit switches is the most common failure point, especially on properties near the Saw Mill River Parkway or any heavily salted street. We troubleshoot the full system before replacing any part. Electric Gate Repair in Yonkers explains the process step by step.
Gate Motor Repair in Yonkers
Sometimes the gate itself is fine and the motor is the failure. We diagnose whether it’s the motor, the control board, the capacitor, or a stripped gear. On steep Yonkers driveways, an undersized motor is a frequent root cause, the motor never had the torque for the grade. Gate Motor Repair in Yonkers covers what we check and what it costs. If the repair isn’t right, the 365-Day Done Right Promise brings us back free.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Yonkers
We’re factory-trained on the brands most common in Yonkers, including Viking, Ghost Controls, DoorKing, and Elite. We stock parts locally for those four lines, which means most repairs in Yonkers are completed in a single visit. See our brands for the full list of nine we service.
Pricing for Gate Company in Yonkers, NY
| Service | Typical range in Yonkers |
|---|---|
| Hinge repair or replacement | $180 – $420 |
| Gate post reset or replacement | $350 – $900 |
| Weld repair on iron gate | $150 – $500 |
| Gate motor replacement | $650 – $1,400 |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $120 – $300 |
| Gate opener installation | $850 – $2,600 |
| Full gate replacement | $1,800 – $5,500 |
| Safety sensor or edge repair | $150 – $400 |
Two things push prices up in Yonkers specifically. The first is grade: working on a steep slope in Nodine Hill takes more time and often requires hinge relocation. The second is salt corrosion on older iron gates, which can turn a simple hinge swap into a weld repair. Whatever the job, we quote a written price before any work starts, and that price doesn’t change unless you approve the change first.
Neighborhoods We Serve in Yonkers
We work across all of Yonkers, from the dense row-house blocks near Getty Square to the suburban streets of Crestwood and Homefield. Our crews are usually able to reach a Yonkers home the same day for a broken gate that won’t secure, and we schedule in advance for less urgent work.
- Getty Square and Nodine Hill
- Park Hill
- Crestwood and Dunwoodie
- Homefield
- Brynmawr and Kimball
Service Area – Cities Near Yonkers
Warden Gate Repair is scheduled and dispatched from our New York City office, and our crews work locally throughout Yonkers and the neighboring communities. We also serve Mount Vernon, NY, New Rochelle, NY, White Plains, NY, and Bronx, NY.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yonkers
For a gate that won’t close or secure, we can typically reach a Yonkers address the same day. For quote-only visits and planned replacements, we schedule within a few days. Call (828) 426-7081 and a live person will tell you exactly when a tech can arrive.
Most repairs don’t require a permit. A full replacement, especially one with an automatic opener, may need city approval depending on the scope. We can tell you what we’ve seen on similar jobs in your neighborhood, but call (828) 426-7081 and we’ll walk you through what applies to your situation.
If your gate won’t close, secure it manually as best you can and treat the opening as unsecured until it’s fixed. A broken gate on a Yonkers street is a visible signal that the property isn’t being watched. Call us at (828) 426-7081 and we’ll get a named technician with a written quote to you as soon as possible.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yonkers Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.