Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in White Plains, NY
Gate repair in White Plains, NY runs into conditions most Westchester towns never see. The downtown condo corridor is packed with automated slide and swing gates wired into building access systems, while neighborhoods like Gedney Farms and Battle Hill hold onto pre-war ornamental iron that needs period-correct fabrication. Add in Hudson Valley freeze-thaw cycles that heave concrete footings every winter, and a White Plains gate call is rarely just a hinge adjustment. If your gate is sagging, stuck, or refusing to open, call (828) 426-7081 and we’ll send a technician whose name and photo you’ll have before he knocks.
Why White Plains Homes Are Different
White Plains layers two very different housing stocks on top of each other, and each one shapes the kind of gate work we do. The single-family homes in Gedney Farms, Battle Hill, and along Ridgeway were built largely before 1960, and many still have their original wrought-iron driveway gates. Those gates were set in concrete footings decades ago, and after enough winters of freeze-thaw cycling from November through March, the posts heave. A gate that dragged in December will often fail to latch by February. The iron itself takes a beating too, road-salt overspray from I-287 and the Bronx River Parkway corridor settles into frame seams, and once the protective coating is breached, rust perforation moves fast in our humid summers.
The other White Plains is the downtown redevelopment boom: luxury residential towers and mixed-use complexes built since roughly 2000 along Martine Avenue, Mamaroneck Avenue, and Main Street. Those buildings run motorized vehicle-access gates tied into key-fob systems, intercoms, and sometimes building-wide automation networks. A residential gate call in that part of White Plains often means coordinating with a property manager’s IT contact before we can even reset an operator. That dual demand, period ironwork on one street and cloud-connected gate electronics on the next, is what makes this market different from Scarsdale or Harrison, where gates skew far more ornamental and far less wired.
Our Main White Plains Services
Most White Plains homeowners and building managers call us for two reasons: a gate that physically will not open or close, and a gate motor (the box that slides or swings your gate automatically) that has stopped responding. Each service has its own White Plains page below.
Gate Repair in White Plains
When a gate in White Plains stops latching, drags on the ground, or sags against its hinges, the cause is usually structural: a heaved post from a hard winter, rusted hinge pins, or a frame that has twisted out of square. Our crews handle mechanical repair on everything from 1940s ornamental iron driveway gates to modern steel slide gates on downtown parking structures. In White Plains specifically, we see a lot of spring failures, the season when freeze-thaw damage from the winter finally shows itself as a gate that no longer meets its latch. Every repair starts with a written price before any work begins. Gate Repair in White Plains
Electric Gate Repair in White Plains
Electric gate repair in White Plains usually means troubleshooting the low-voltage side: limit switches knocked out of alignment by frost heave, photo-eye sensors crusted with road salt, or key-pad and intercom wiring that has corroded at the connections. Downtown condos add another layer, many slide-gate operators along Martine Avenue tie into building automation systems and cloud intercoms, so we coordinate with property management before resetting anything. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, and our techs handle the wiring diagnosis as confidently as the mechanical side. Electric Gate Repair in White Plains
Gate Motor Repair in White Plains
A gate motor that hums but does not move, trips its breaker, or runs only in one direction is usually a capacitor, gear, or limit-switch failure inside the operator. In White Plains, the seasonal pattern is predictable: motors that worked fine in October fail in February because condensation from rapid temperature swings has worked its way into the control board. Our technicians bench-test operators and replace failed components on-site whenever parts are available, which they usually are for the major brands we service. Like every Warden job, the motor repair price is written down and agreed before we turn a wrench. Gate Motor Repair in White Plains
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in White Plains
We carry parts and factory-trained service knowledge for nine major gate and opener brands, including Linear, Viking, Ghost Controls, and DoorKing. That means we almost never have to order a board and come back a week later. See our brands for the full list.
Pricing for Gate Company in White Plains, NY
| Service | Typical range in White Plains |
|---|---|
| Hinge adjustment or replacement | $140 – $300 |
| Gate sag repair and realignment | $180 – $380 |
| Weld repair on ornamental iron | $150 – $450 |
| Gate opener circuit board replacement | $250 – $650 |
| Limit switch replacement and calibration | $120 – $280 |
| Photo-eye sensor repair or replacement | $110 – $260 |
| Keypad or intercom integration repair | $160 – $400 |
| Full slide gate motor replacement | $900 – $2,400 |
| Full swing gate motor replacement | $800 – $2,100 |
| Gate post reset and re-concrete | $400 – $1,200 |
White Plains prices run toward the upper end of these ranges when a building manager needs us to coordinate with building automation systems, or when winter heave has moved a post enough that the whole frame needs re-setting. Whatever the job, the price is written down and agreed before any work starts. There are no surprise line items at the end.
Neighborhoods We Serve in White Plains
We run service calls across all of White Plains, including downtown rental and condo towers and the older single-family streets around them. Response time is typically same-day or next-morning for repair calls, depending on the season.
- Gedney Farms
- Battle Hill
- Downtown White Plains (Martine Avenue and Mamaroneck Avenue corridor)
- Rosedale
- North Broadway area
Service Area – Cities Near White Plains
Our White Plains crews also cover the surrounding Westchester and Bronx communities. If you are just across the city line, we likely serve you too: Yonkers, NY, New Rochelle, NY, Mount Vernon, NY, and Bronx, NY.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in White Plains
Repair calls in White Plains are generally scheduled same-day or next-morning, depending on the season and where you are in the queue. Downtown condo buildings sometimes require property management sign-off before we enter, which can add a little time. Call (828) 426-7081 and we will tell you exactly when a named technician can arrive.
Most gate repairs and motor replacements in White Plains do not require a city permit, but condo and co-op buildings usually require property management approval before we touch the gate. If you are in an HOA, check whether gate work falls under their architectural review rules. We can help with the mechanical and electrical details of the request.
Yes, that is a large part of our White Plains work. We routinely service slide and swing gate operators tied into building access control, intercoms, and building automation systems along the downtown corridor. We coordinate with property managers and their IT contacts when needed, but the repair itself is done by our own technicians.
If your gate needs work in White Plains, call (828) 426-7081 for a free estimate. You will get a written price before any work starts, and the technician who arrives will be the person whose name and photo we sent you beforehand.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What White Plains Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.